Steel Safe Industries Atika Industrial Area, Rajkot, Gujarat

DOOR SLAB The outer layer of the door slab is of tough tested quality of M.S. Plate. It is further reinforced by a composite 100 mm thick layer of double duty barrier material and layers of flame and arc resistant (special) alloy which provides dependable protection again fire and attack of power drilling, oxy-acetylene flame and arc cutting. This dual protection is provided over the entire lock case. DOOR FRAME Tested quality 10 mm thick M.S. plate is used for fabricating the one-piece bent angle door frame. For strength and rigidity the door frame is suitably, reinforced along the height and width. A special ‘Box-jamb’ is welded to the frame to provide strong rebate for the shooting bolts. BOLT WORK AND LOCKING MECHANISM The door is provided with 12 shooting bolt (each of 38 mm dia.) six in front, six at the rear, which slides behind the tough ‘Box-jamb’ rebate. These bolts can be activated simultaneously by the movement of handle. Any pressure exerted on the lock bolt on one side automatically bring into play equal balancing pressure on the opposite side to neutralize and defeat the attempts to dislodge the lock. The doors are fitted with two superior quality dual control precision 10-lever locks along with S.S. keys in duplicate. At extra cost, if specified at the time of placing of the order, 3 or 4-wheel numerical combination lock which offer nearly 100 million combination for setting and resetting can be provided or superior quality imported Time Lock with multiple clock movements can be fitted. AUTOMATIC RE-LOCKING DEVICE With a standard feature on all models of door, this sensitive device is triggered-of when an attack is attempted on the lock through the keyhole with any instrument. This automatic re-locking device guards all the key locks. ADJUSTABLE HINGE The hinges are properly aligned both vertically and horizontally for ensuring smooth and easy operation of the door. The hinge enable the door shutter to be adjusted vertically so that it maintains accurate fit with the frame. MODE OF OPENING For convenience of working in the strong room, a well designed grill gate is provided which is secured with 8-lever lock operated from both sides. The main doors always open outside and the grill gate inside. All standard doors are hung on the right. However, if specified at the time of placing the order, the door and the grill gate can be hung on the left. ANTI-CORROSION TREATMENT AND FINISH All steel component are given a through anti corrosion treatment. The chemicals used for this treatment are exclusively formulated through careful experimentation at our plant. All steel components free from grease and rust are treated for formation of rust preventing iron-phosphate film. This vital film is protected through a process of passivation, the final step of the treatment. Immediately afterward, the steel components are given coats of rust inhibiting zinc chromate primer for more protection against rust. Then the door is given coats of high quality paints. Alternatively the doors can be finished by cladding in stainless steel at an extra cost.

To eneble the renters to oprate safe deposit lockers at upper level.   FEATURES Easily movable Non-slip treads Ruggedness   DIMENSIONS (APPROX) Height: 1615 mm Width: 0660 mm Depth: 1000 mm Color: Powder coated

Owing to our in-depth domain expertise, we are offering a premium quality Steel Sleeper (For Safe Deposit Locker Cabinets) which is precisely designed for safety lockers. Manufactured under the guidance of skilled professionals, our offered sleepers are in accordance with set industry standards. In line with clients' detailed specifications, we provide these sleepers to our clients in different customized forms. Our clients can avail these sleepers from us at affordable prices.The Safe Deposit Locker Cabinets should be kept at a height and away from the direct contact of walls and floors for the following Reasons: To keep them safe from water in the vault in case of flooding. To prevent moisture of walls and floors from damaging the locker cabinets. To raise the locker height for the convenience of renters having lockers in the lower rows.   FEATURES Smooth edges Corrosion resistance Accurate dimensions   DIMENSIONS (APPROX) Height: 063 mm Width: 100 mm Depth: 600 mm

MATERIAL The lockers are manufactured as per IS: 5244. The two sides, back and top of the locker cabinet are fabricated from tested quality 5 mm thick M.S. plate. The partitions and the shelves are of 2 mm HR prime quality M.S. sheet. The door plate of each locker is 10 mm M.S. plate. The hinge arrangement, such that it provides sufficient resistant against tempering attack of common hand tools. The shelves of the locker are reinforced at the front with the 50 X 10 mm bright solid flats. LOCK Each locker is fitted with high quality first class unpickable dual control 7 leave key lock. These locks are self locking so that the custodian does not have to re-lock the locker with his key after the customer has locked it. The mechanism of the lock is such that the customer shall not be able to withdraw his key unless the locker has been re-locked fully. Once the customer has locked the locker, the same cannot be opened unless the custodian turns in his key to take off his control. We can also provide personal lock known as ‘renter lock’ from inside for total protection and customer retains the key. Over all pad locking system can also be provided so that customer can use his own padlock for more confidence. SIZE The size and dimension of locker is made as per IS: 5244. In addition to it, we also manufactur safe deposit lockers as per the customer’s choice and specifications for the best and economical use of available space. ANTI-CORROSION TREATMENT AND FINISH All steel components are given a through anti-corrosion treatment. The chemicals used for this treatment are exclusively formulated through careful experimentation at our plant. All steel components, free from grease and rust, are treated for formation of rust preventing iron-phosphate film. This vital film is protected through a process of passivation, the final step of the treatment. Immediately afterwards, the steel components are given coats of rust inhibiting zinc chromate primer for more protection against rust. Then the locker cabinet is given coats of high quality paints. Doors and hinges are decorated by powder coated 0.71 mm thick aluminum cover.

Brand : Steel Safe Industries

This compact table has a steel encloser on 3 sides and on the top to provide privacy to the renters examining their possessions.   FEATURES Durable finish Fine edges Easy to move   FEATURES Durable finish Fine edges Easy to move

We are the leading supplier of this products.

Material : Steel

Finishing : Powder coating 

OUTER BODY A fully Mig welded, multi-corner single/two joint construction makes the body from total 7mm of tested quality M.S. plate. All 5 sides and the door of the safe are armored with a specially formulated barrier material which is encased between strong outer and inner steel body to withstand the attacks of sledgehammers, power drill and chisel, impact of a fall from upper floors. The overall body thickness on all 5 sides is 100 mm (approx.) including barrier materials which offers fire as well as burglar resistance as per IS: 550 (2005). DOOR The most attacked portion of a safe, the safe door is made of tested quality M.S. plate and tough steel plate reinforced with oxy-acetylene, drill resistant alloy plate and specially formulated barrier material. Overall thickness of the door is 150 mm. BOLT WORK MECHANISM The door is provided with solid flanged of 5 mm steel plates on four sides, forming a lock case. Depending on the size of safe have varying number of 32 mm dia. shooting bolts as per IS: 550 (2005). Strong movable shooting bolts are evenly spaced to secure the door on the two sides to make it impossible to dislodge the door by cutting through the hinge. Any pressure exerted on the lock bolt on one side automatically brings into play equal balancing pressure on the opposite side to neutralize and defeat the attempts to dislodge the lock. A two-step lock case construction offers better resistant again the fire and burglar attacks. AUTOMATIC RE-LOCKING DEVICE A standard feature on all models of safe, this sensitive device is triggered-of when an attack is attempted on the lock through the keyhole with any instrument. This automatic re-locking device guards all the key locks. LOCKING MECHANISM The locking mechanism is operated by a handle in the front and controlled by superior quality, dual control, and high precision 10 levers locks. These locks are unpickable and only the original keys will open them. CHOICE OF LOCKING ARRANGEMENT Additional dual control lock can be fitted on various models. Keyless numerical 3 or 4-wheel combination lock, offers a choice of nearly million combinations for setting and resetting. The dial of the lock can be made inoperative by locking it for extra security. Time lock can be fitted; imported superior quality electronic / mechanical UL listed lock with multiple clock movements. FINISH All steel components are thoroughly cleaned from rust, mill scale, dust, dirt etc. and treated for anti-rusting, followed immediately by coats of high quality zinc chromate primer. Then the safe is given successive under coats and finally a finish coat.

Material : Steel

Brand Name : Suraxa

We are engaged in offering an impeccable range of Air Ventilator that facilitates for air circulating according to vault room and other atmospheric requirements. Manufactured using the quality assured raw material, our ventilator is available in various specifications. In addition to this, the provided ventilator is highly acclaimed by our clients for its smooth finish and low maintenance. Our esteemed clients can avail this ventilator from us at market-leading prices.   FEATURES Modular construction Strong & durable Easy to install   SIZE 405 X 405 X 305 mm (Approx.)