Cable Tester Dealers

The base unit of the cable tester can be connected via a network cable directly to a hub or switch to test wire connections, or to a network card to test the send receive pairs of wires, it can test if there is any open or miss-wire without the remote kit. 9 Led's to show you exactly which wire is open or miss-wire on both remote and master unit. Network Cable Tester can judge wrong connection, short circuit adm open circuit Build in power switch for power saving RJ45 Network Cable Tester test correspondingly double-twisted cables 1, 2, 3, 4, 5, 6, 7, 8 and Ground 9 LED lights to indicate wiring connection on both remote and master unit Auto scanning function for rapid testing

Scans for continuity, open, short as well as reversal and crossed wiring. Features with Auto or Manual scans for pin-out indicators. Built-in tone generator for cable tracing & identification. The remote terminator can be used to test the existing cable installations. Patch panel and wall plates can also be easily tested with the RJ45 adapter cable. RJ45 to BNC adapters allows for testing & tracing of BNC cables. Battery low indicator prevents misreading results.

Transmitter & receiver Included. To identify & trace up to 16 cables.It can also be connected to heat and water supplying 　installation system. Digital display on the receiver indicates the relative cable.

We are offering cable tester model 5199. Description model 5199 works on a proven "pulse reflection technique" & can detect most common faults quickly. It transmits a pulse of controlled pulse width & amplitude along the pair under test. The pulse travels with a fixed velocity & propagation which depends on the dielectric material surrounding the conducter - (pvc, jelly, paper etc.) whenever there is a change of characteristic impedence, a part of pulse energy reflects back to the source & both inerdent & reflected pulse are displayed on crt. The distance to fault is computed & displayed on 4 12 digit led display. Specification range : 5 kms10kms accuracy : + 1 % display : cathode ray tube : 95 mm rectangular 7-segment, 4 12 digit led

NAUGRALABS LABORATORY PRODUCT NAME: PLIABILITY TESTER FOR CABLES FOR TESTING LAB NaugraLabs Laboratory Product Code: NLE-Export-104005 Description and Specification for Lab Tenders Pliability Tester For Cables For Testing Lab Workshop. Pliability Tester For Cables - For Testing Lab Pliability of Cables is determined by determining the force exerted by the cable specimen at a specified distance while bending to a specified degree or determining the degree of bend for exerting a specified force at a specified distance.   The  Pliability Tester for Cables consists of digital balance fitted on a rigid base. One end of the cable under test is held in a rotating grip, while the other end is resting on a wedge on the balance at a distance of 76.2 mm (3”) from the rotating grip pivot. A pointer is attached to the grip and angle of movement of grip is indicated on a circular scale. civil lab equipments manufacturers

Whether you have a few or a mountain of cables, it pays to know which ones are good and which ones need to be tossed into the not so good pile. The MTEST-1 is an incredibly handy tool that can out the cables that may have seen too much action.

» 1 to 1,000 MHz frequency range. Certifies twisted pair to all approved ISO and TIA standards, including ISO Class F. » Exceeds Level III and proposed Level IV accuracy specifications. » Improved result reporting displays all data in easy to read summary, detailed and graphical formats. » Powerful diagnostics locate link disturbances on each pair, displaying the size and distance to the disturbances in a straightforward manner, speeding link failure recovery. » Unique “connector-less” recessed copper and fiber optic adapters eliminate virtually all potential adapter or tester damage…keeping your SCT on the job. » Powerful SQL based certification management software allows quick organization, editing, viewing, printing, saving or archiving test results by job site, customer, campus building and more.

Find The Cable Fault By A Single Machine The machine will save you through the cable faults. It's seen that the cables are damaged due to heavy loads and unpleasant weather situations. The product does justice to these times. The service seeker should be your end goal if you want to benefit in organisation and that’s the reason the top High Voltage Cable Tester Suppliers In India have designed the product. You can take this shockproof device in a harsh climate and it will give you a smooth repair. You will know about the live wire, its failure reason, live voltage detection, and further   Voltage Detection Levels For An Accurate Testing The High Voltage DC Tester will serve you know the five intensity detection levels that can range from 3 kV to 33 kV. When you have this type of voltage detection level, you have more freedom to test the cable’s fault to the right extent. Being a repairman, you need to find the issues of the data cable or electrical cable that lead the electricity to the end-user. The testing will benefit you and get you high profit in your company and will stimulate you to make the new cables for the business to business and business to consumer segments. Try the High Voltage Cable Tester Manufacturers In India products now!.

Cable Insulation Tester is similar to ELD with the most important difference that this monitors the signaling cables in un-energized mode. Insulation Resistance value ranging from 500 KO to 100 MO. It has a special feature, in case a pair is energized the instrument automatically stops functioning.

Features: The model AMS-1070M measures an increase in DC resistance due to deterioration of the secondary cable or Kickless Cable and also detects an abnormality in the secondary circuit caused by insufficient bolting or oxidizing of the contact surface.