Data Converters Dealers

The Apple Thunderbolt to Gigabit Ethernet Adapter lets you easily connect to a high-performance Gigabit Ethernet network at best price in india. Small and compact, it connects to the Thunderbolt port on your Mac computer and provides an RJ-45 port that supports 101001000BASE-T networks.

This is a simple to use USB to Serial Converter. It outputs RS232 level signals on the TX and the RX line. Unlike the cheap converters available in the market, which rarely work, if at all, this converter is highly reliable and can be used on all major operating systems, computers and laptops.This converter is USB powered and needs no external power. It can provide the USB port's 5V power supply to an external circuit.You can also get TTL level RX and TX signals from the header pins on the board. The board has standard 3 mm mounting holes for easy mounting.When connected to USB port this converter sets up a virtual serial port which can be used and interfaced just like any normal serial port. You can use this board with all our development boards to do serial communication through USB. You can also program our development boards, which support serial bootloading, through USB using this converter.This USB to Serial converter uses the popular CP2102 IC from Silicon Labs for the USB conversion. This board can be used on all major operating systems.

This Media Converter is known for easily connecting any two dissimilar types of media. Further, this Media Converter is designed keeping in mind all the principles and rules of the Networking. Further, the design of this Media Converter is meant for preventing the losses of any type of data links. Components Media Converter : Multi-modeSingle ModeSingle FiberDual FiberManaged Media converterGigabit Media ConverterMulti-port Media ConverterMode ConverterMedia Converter with power backup

Ztech’s digit RS232 to RS485 converter is designed to offer a truly simple, cost effective digital pressure gauge to cover a wide range of applications from calibration laboratory to in-field use. It indicates pressure with different selectable units by user with the resolution of maximum 6 digits in battery operated version. It has auto power OFF function in battery operated model. It has other model in which it can be used as loop power indicator with 4- 20mAdc transmitter by giving 15 to 24Vdc external supply voltage. In this version it will give you resolution of four digits with selectable multiplying factor for different unit scales with red LED display. It is operated by high precision piezoresistive silicon sensor technology. It is available in two different applications for air, gases (dry) media other model is for air & liquid with SS316 diaphragm. Features: Accuracy: 0.05% FS 0.1%FS 0.2%FS Display Display: Monochrome LCD for battery power Red LED for external power supply. Units: PSI, Pa, mbar, bar, hPa, kPa, Mpa, Kgcm2, mmHg Operating & Compensated: 32°F to 122°F ( 0°C to 50°C) Storage: -40°F to 167°F ( -40°C to 75°C)6 Process Connection: 0.5” NP2T (M) standard, other on demand Diaphragm: 316L stainless steel. (for liquid application) Battery life: 2000hrs. Low battery Indicator: YES Output: 4- 20mAdc (in external power option) Output Loading: Max 600 Ohms loading capacity Com port: RS232 RS485 Modbus RTU or GSM connectivity Power: Battery or 24Vdc external Humidity:

Telenet’s TPC 3180 Protocol converter is the most newly promoted Network Bridge that can convert 1-8E1 to 100Base-T or 10Base-T Ethernet, and vice versa. This protocol converter can extend the bandwidth to 16.384Mbps. It not only provide completed indicators to show the status and alarm messages of the E1 line and Ethernet port, but also support BER Stat. of E1 and flow Stat. of Ethernet port. It is widely used in two LAN connecting, remote monitor and video broadcasting Features: Compatible with ITU-T G703, G704 and G823 Support 10Base-T, 100Base-TX protocol 1024 pieces of MAC address list and with address filter function Enable any group of CH1-CH8 E1 channel to transmit the data at will Extend the bandwidth to 16.384Mbps when using 4E1 channels Support auto-inspection of effective E1 channel without interruption of data transfer. Automatically cut off the E1Channel when it has LOS and AIS alarm, and inform the remote end simultaneously. Support remote E1 Loop function 75ohm unbalanced E1 channel impedance RS232 port for management, one software can manage up to 256 pieces of device Internal power supply, AC160V-260V or DC -48V optional   Specification: E1 Port Bit rate: 2.048Mb Line code: HDB3 Standard: in accordance with ITU-T G.703, G.704 Connector: BNC connector, line impedance 75ohm Number of E1: 8 Jitter Performance: compatible with G.742 and G.82 Etherent Port Data Rate: 10/100Mbps Standard: Compatible with IEEE802.3 Connector: RJ45 Number of Ports:1 port Auto-negotiation with half/full duplex

Features : Serial protocol support for Modbus (RTU and ASCII) Master/Slave Network protocol support for Modbus TCP (Server/Client) Supports Serial to Ethernet Raw conversion with Telnet RFC2217 Serial Interface support for RS232, RS422 and RS485 network Serial Baud rate: 300 bps to 115.2 Kbps Ethernet interface support: 10/100Mbps with Auto Negotiation Configurable using Embedded Web server and Application software Network Protocols Supported: ARP, TCP/IP, HTTP, BOOTP, TFTP, ICMP, TELNET (not applicable for Modbus RTU to Modbus TCP Protocol conversion) , DHCP, AutoIP Isolation between Communication Ports & Input Power supply

Low cost PCB module for OEMs to be integrated in to their products. Supports both RS232 / RS485 interface. Requires external 5 V DC supply.

The 2 channel Telephone to Fiber Converter is a high performance fully digital fiber optic interface for links between a PABX and any touchtone telephone. It is designed for applications such as PABX/Line extension between buildings or to a remote location (e.g. from a central control room to a security guard post) where only one or a few telephones are required. A typical application example could be the emergency telephone systems of highways or other ITS (Intelligent Transportation System) applications. The Telephone to Fiber Converter can also be used to connect any two touchtone telephones to form a dedicated intercom system. The Telephone to Fiber Converter is available with common optical fibers operating at wavelengths of 850nm, 1300nm or 1550nm. Both multimode and single mode versions are available to suit different application requirements. The longest transmission distance supported by the Telephone to Fiber Converter is 2 km on multimode fiber or 20 km over single mode fiber. For longer distances or special transmission requirements, please consult OSD. FEATURES Analog telephone / switch interface characteristics Voice Bandwidth: 8KHZ Codec method: PCM codec Signaling Control: Transparent support any in-band signaling Interface communication terminal: Ordinary telephone or group telephone ,program-controlled switches (PBX), public telephone network PSTN Connection: Point to point link/PBX system FXS: Ringing voltage: 75V, ringing frequency: 25HZ FXO: Two-wire input impedance: 600Ω (off-hook) Return loss: 40 db, ringing detection voltage: 35V Ring detection frequency: 17HZ-60HZ, wire input impedance: 600Ω (off-hook) Return loss: 40 db