Digital TDR Soil Moisture Sensor
Get Price Quote
The TDR-315L is a true waveform digitizing Time Domain Reflectometer that derives soil permittivity and water content from the propagation time of an electromagnetic impulse conveyed along its waveguide. Like many of its expensive predecessors (conventional TDR mainframes) it contains an ultra-fast rise time step function generator, a waveform digitizer (200 GSPS) and a picosecond-resolution time base (5ps). Unlike these predecessors it eliminates the bandwidth-constraining coax cable, the bulky console, and 90-97% of the cost. Because it is a true time domain device its readings are not derived from current and voltage magnitudes and relationships and hence are not impacted by soil electrical conductivity and compaction. Its high immunity to EC allows credible application in non-saturated soils wetted with sea water. It uses the standard SDI-12 interface and is compatible with all data recorders that are version 1.3 compliant. Functions: Volumetric Water Content (0 to 100% with 0.1% resolution) Permittivity (1 to 80 with 0.1 unit resolution) Soil Electrical Conductivity a.k.a. Bulk EC (0 to 5000 μS/cm -resolution depends on reading range) Soil Temperature (-40 to +60 degrees C with 0.1 degree resolution) Pore Water Electrical Conductivity (0 to 55000 μS/cm)
consistency transmitter
Get Price Quote
The consistency blade type transmitter measures consistency by sensing the "shear force" on a static blade in the stock stream. The size and shape of the blade is designed to compensate for small flow variations. This gives higher accuracy than traditional linear response curves because it adjusts for higher sensitivity at low consistency and lower sensitivity at higher consistency. This force causes the sensor blade to pivot; the amount of movement is proportional to the force needed to separate "shear" the fibers. The sensor blade is connected to a differential capacitor system. This non-contact device measures the movement and produces a variable voltage that is proportional to consistency. Thus "shear force" is converted into a voltage. This voltage is fed into a PID module. The module converts the voltage into a 4-20 mA signal. By utilizing a look up table, the nonlinear consistency sensor voltage is converted to a linear 4-20ma output. The module communicates via protocol on the 4-20 ma signal wires. Span, upper & lower range values and other variables can be adjusted using a standard hand held communicator.Features : Blade transmitter for all pulp furnish. No moving parts, only the blade is in touch with process. Digital display of set point and actual consistency. Pre calibrated for different type of stock to match any furnish. Microprocessor based controller read consistency 2% upto 10%. Main parts of consistency regulator. Consistency transmitter (blade) Consistency transmitter controller PID Controller Dilution Valve Controller with Dilution valve (size 50 mm to 75 mm) Dilution valve controller
Best Deals from Instrumentation Equipment
SOLAR PANELS
23 - 26 Per watt
5 kwp (MOQ)
We make available premium quality Solar Panels which are reckoned for their quality. With us, buyers are free to place orders and can expect timely deliveries of the same. We have installed a large storage facility wherein we keep a large stock of the offerings. This facility helps us in keeping the entire lot away from the damaging factors like moisture, sunlight, dust, rain, etc. These come in different shapes and sizes but they all do the same thing, ie, turn sunlight into DC electricity.
Puf Panel
17 Per Square Feet
2000 Square Feet (MOQ)
human machine interfaces
Get Price Quote
Keeping the globally accepted packaging norms in consideration, we make certain that the packaging is done under the strict supervision of experts and professionals. We have with us a well-maintained and capacious storage unit that is facilitated by advanced and automated warehousing system, which is operated and supervised by experts only. Brand Name : ABB, Allen Bradley, Seimens, Mitsubishi, Delta, B&R Automation, Heidenhen, Danaher Motion.
lt armoured cable
Get Price Quote
Our organization is highly concerned towards providing excellent quality products to the customers and thus check them at all stages. Acknowledged as a reliable name; we make available the qualitative products that are accessible from Roorkee(India).
Resistance Temperature Detector
2,200 - 5,000 Per 1
100 500 (MOQ)
all size avlable
Measurement/ Instrumentation Lab
Get Price Quote
Range : 0 to 20 mm Display : 3-1/2 digit LED Resolution : 0.1 mm Excitation : 2 Volts RMS 5 KHz, Sinewave Power supply : 230V +/-10%, 50 Hz. Calibration Bench with 20mm micrometer. Test point also provided. Complete with operation manual. Experiments: To study waveform at different points. To plot Displacement vs. Digital Voltmeter reading.
Thermocouples & Temperature Sensors
1,800 - 4,500 Per Piece
5000 NOS (MOQ)
Salient Features In a process industry the temperature detector is an integral part of the machine, and is subjected to various shocks vibrations in a rotating machine. It may be subjected to direct compression forces as in case of slot RTDs. We manufacture our RTDs Accordingly; All the Materials used are as per particular process requirements. The reproducibility is a very important factor. We ensure proper reproducibility in long run of use.For some requirements, IR values are very important; we ensure proper sealing for good IR values. Where high voltage surges are likely the RTDS are tested for enhanced high voltage values. For some applications thermal response time is an important factor we test and declare the value for each type.For RTDs which are to be embedded in the rotating machines the long run reliability is ensured by a vibration and compression proof design.For bearing metal temperature measurements, air, gas or flue gases requirements and for pipeline measurements sealed units Assembled with or without thermowells are available.Some of the RTDs are provided with interchangeable measuring inserts especially in thermowell type measuring systems.Protective tubesThe elements (Sometimes measuring inserts) are protected in metal sheaths, it is constantly subjected to hazardous conditions and material of protective tubes is decided as per DIN43763 and DIN 437230. Normally for temperatures up to 600'C SS304, SS316 and SS321 sheathe are used. Thermowells are made of SS321 or chromium molybdenum wieldable alloy steels.Connection headsThese are light metal alloy weather proof to IP. 67 (IS2147) category heads with hinged lids. The heads are provided with one or more cable entry glands as per customer choice. The connection Terminal Block is of pure Alumina with plated brass terminals. Terminals ensures very good grip of inside and outside leads.Thermal ResponseEven slight difference in wall thickness or material will cause substantial increase in Thermal Response Time and values are reported accordingly.LeadsThe RTDs with Integral leads such as slot RTDs are provided with silver plated copper conductor having PTFE insulation. Some designs are provided with braids of SPc or SS and again provided with PTFE jacket, other leads available are of silicon and ETFE for nuclear radiation resistance. All the leads are tested for enhanced HV, IR and pull test values. The specs conform to BHEL Customer requirements.Each RTD/TC is provided with with following Routine test. Calibration accuracy at minimum2 points Material T.C Dimensions TC H.V.test results (for RTD's'only) IR test results Hydraulic pressure test for'thermowells Each lot is tested for followings additional tests. Lead Pullout test. Insulation resistance at elevated Temperature. Thermal response time test. Type test for RTD’s as per BS 1904:84,IS 2848:86 are conducte regularly (IS 7358 for TC’s) Accuracy test for full range. Thermal Stability test. Vibration / Endurance test. Pressure / Compression strength test. Measuring insert leak tightness test. IP-55 weather proof test for connection head. Immersion error test. Thermo electric effect test. Thermal response time test.
temperature sensor ,humidity sensor
Get Price Quote
We are one of the leading manufacturere of temprature and humidity Temprature and Humidity Sensor.Our Sensor are highly realible and we are manufacture the combo senson of temprature and humidity which is enclosed in protection shield sensor is connected to the Data Logger in which data stored. We can easily fetch the data through the data Shuttle and mobile communication.
Digital Panel Meter
Get Price Quote
We are well-known for offering advanced Digital Panel Meter to the clients. The clients get the option in terms of Digital Panel Meter with LCD display or LED display. Our Digital Panel Meter is microcontroller based and is appreciated for its high accuracy and read rate. The best feature of our Digital Panel Meter is that the signal can be automatically captured and can be easily displayed by keyboard commands. Features 4.5 digit LED+/- 20000 counts5V DC operatedProgrammable UnitsTare FunctionRS232 outputProgrammable Decimal pointProgrammable UnitsReal time clockFour button key padUsed as a direct-reading DC voltmeterProgrammable calibration factorOther controls on connector include meter hold, meter resetMeasurement accuracy is +/- 0.1% of full scale ±1 countProvides a full-scale readout of ±20,000 counts
4 Port ABACUS Smart Switch
4,000 - 6,000 Per Piece
Convert all existing Switches into Smart Switches by instalating ABACUS Smart Controller and control all electrical appliances through Mobile App form anywhere in the world via Internet , Wi-Fi , Bluetooth , Manually . No Changes required in wiring etc.
Electrical Control Panel
Get Price Quote
Buyers can rest assured; our products are reliable, as they are sold by us only after subjecting them to stringent tests of quality. You can make payments through online methods such as net banking, PayPal, or offline methods such as draft depositing, cash on delivery etc. Our policies regarding payment are swift and transparent.
Laboratory Automation Autoline
Get Price Quote
For measuring Bursting Parameters, Tensile Parameters, Thickness, Grammage, Tear Parameters and many more through a single computer interface. The PC Lab Automation Software "FIBRETEC FBI MONITOR SYSTEMS" is used to collect data and controlling the autoline instruments. Monitoring is done through the FBI MONITOR SYSTEM which is a PC based laboratory data acquisition system designed around the unique operating system such as WINDOWS 9X, ME & XP. The software has connectivity from 1 to 16 individual test stations. User friendly software guides the operators through all steps of program selection, parameter modification and sample test to minimize to human error during test. The FBI MONITOR have the capacity to display, store and edit up to 500 readings and include statistics such as Averaging, Standard Deviations, high low readings which can be printed in a structured report. All the digital instruments are equipped with communication ports able to identy the data through instruments
Thermocouple
Get Price Quote
We are manufacturing various type of highly accurate thermocouple for various industries. Our Industrial Thermocouples are created according to the different fittings. The size & length of thermocouple are rely upon client prerequisite and made as stated by extent of temperature. Special Thermocouple with Glass epoxy insulation:-We are also manufacturing special type of thermocouple having epoxy glass insulations. Our thermocouples are used in various industries including Engineering Industry, High-temperature metallurgy industry, Petro chemical industry and Thermal power plants.
Electrical Control Panel
Get Price Quote
We are a prominent Supplier of all types of Electrical Control Panels. We bring forth wide variety of Electrical Control Panels that is known for high quality. Electrical Control Panels, available with us, are accurately dimensioned and durable. The Electrical Control Panels are appreciated for their hassle-free functioning. Avail Electrical Control Panels from us at very reasonable prices. Range MCCPCCDG Synchronize PanelPLC & Drives PanelAPFC Panel & Fabricated Enclosures
Measurement and Instrumentation Lab Equipment
Get Price Quote
We follow precise engineering methods and techniques in order to manufacture high quality Measurement & Instrumentation Lab equipments. We can provide the diffrent kind of Measurement & Instrumentation Lab equipments with their models : MI01 : Digital Stroboscope MI02 : Displacement Measurement Tutor using LVDT MI03 : LDR Measurement Tutor MI04 : Load Measurement Tutor using Load Cell MI05 : Measurement of Angular Displacement by Capacitive Pick-up MI06 : Pressure Measurement Tutor using Pressure Transducer MI07 : Speed Measurement Tutor by Magnetic Pick up MI08 : Strain Measurement Tutor using Strain Cantilever Beam MI09 : Temperature Measurement Tutor using RTD sensor MI10 : Temperature Measurement Tutor using Thermocouple MI11 : Torque Measurement Tutor using Torque Transducer MI12 : Vibration Measurement Tutor using Piezo Electric Base Sensor
Solar Panel
Get Price Quote
1 Dozen (MOQ)
We offer solar panels from 3w to 280w .
consistency transmitter
Get Price Quote
consistency transmitter, motorised basis weight valve
Sensors
Get Price Quote
Sensors, HDPE & LDPE Films, Elastomeric Bridge Bearings, Load Cells
Electrical Control Panels
Get Price Quote
Electrical Control Panels, Electrical Switchgear & Wire Cables
Automotive Products
Get Price Quote
Automotive Products, CFL Mercury Lights for Boat Outside, GLOW PLUGS
dc speed control systems
Get Price Quote
dc speed control systems, dc position control systems
PVC Control Cables
Get Price Quote
PVC Control Cables, Cables, Rf Coaxial Cable, rj coaxial cable
Sensors
Get Price Quote
Sensors, Scientific Instruments, instrumentation system
Electrical Panel
Get Price Quote
Sensors
Get Price Quote
Sensors, allied electronics equipment
measuring equipment
Get Price Quote
measuring equipment, Surveying Instruments, metal decorative items
Sensors
Get Price Quote
Sensors, load cell range depend on requirement
SOLAR PANELS
Get Price Quote
Solar EPC Service, dust bins containers, ac cable, Dc Cable, Ac led light