Solar Products Dealers in Roorkee

A MPPT solar charge controller is the charge controller embedded with MPPT algorithm to maximize the amount of current going into the battery from PV module. MPPT is DC to DC converter which operates by taking DC input from PV module, changing it to AC and converting it back to a different DC voltage and current to exactly match the PV module to the battery. Examples of DC to DC converter are... Boost converter is power converter which DC input voltage is less than DC output voltage. That means PV input voltage is less than the battery voltage in system. Buck converter is power converter which DC input voltage is greater than DC output voltage. That means PV input voltage is greater than the battery voltage in system.

For Global RadiationISO classification second classSpectral range 305 - 2800 nmSensitivity (nominal) 15 µV/ W.m-2(Each Sensor is calibrated separately)Temperature range -40 - +80 °CRange 0 to 2000 W.m-2Temperature dependence < 0.1%/°CCalibration traceability WRR          

We offer Light Intensity Control System useful for control labs. The light intensity control system is designed to bring out the basic features of closed loop systems in the form of a laboratory experiment. The light panel comprises of a number of filament lamps which get power from amplifier. Average intensity of the panel is sensed by a light sensor and a suitable voltage level is produced. Error detector, reference input and error amplifier are of standard configurations found in any linear control system. In addition to the above, the light panel also contains a few uncontrolled lamps which may be used as disturbance source. Further a square wave signal is available for dynamic response studies. Highlights Feedback control of light intensity Study of inherent non-linearties-sensor, lamps PI control Dynamic response displays >>Experiments Characterization of light panel and light sensor blocks Study of a practical single loop feedback control system which includes: • Disturbance study • Error monitoring Performance improvement through P-I control Evaluation of dynamic behavior >>Features and Specifications Built-in 3½ digit DVM Built-in IC regulated power supplies Literature and patch cords included Seven lamps 6V/300mA 5Hz square wave and triangular wave for dynamic response study The experiment is complete in all respect.

The RainWise solar irradiance sensor is an excellent add-on to the MK-III weather station. This small, precise sensor is hand tested and calibrated at our factory.

A MPPT solar charge controller is the charge controller embedded with MPPT algorithm to maximize the amount of current going into the battery from PV module.

We are manufatcurer and supplier of Solar Radiation .Our Sensor is one of most realible in the sensor market filed.We have muti type Radiation Sensor such as pyranometer for Global Raditaion,4 Component Net-Raditation Sensor etc.. which are used for measuring different type of raditation.

a mppt solar charge controller is the charge controller embedded with mppt algorithm to maximize the amount of current going into the battery from pv module.mppt is dc to dc converter which operates by taking dc input from pv module, changing it to ac and converting it back to a different dc voltage and current to exactly match the pv module to the battery. Examples of dc to dc converter are.. boost converter is power converter which dc input voltage is less than dc output voltage. That means pv input voltage is less than the battery voltage in system.   buck converter is power converter which dc input voltage is greater than dc output voltage. That means pv input voltage is greater than the battery voltage in system.

We are offering solar charge controller 12v/24 v 20ampere. microcontroller based solar charge controller automatic switching to 12v or 24 v with lcd display.various other ranges like 12v-5amp, 12v-10amp,12v-30amp,24v -20amp,24-30amp,48v-30amp,48v-40amp,48v50amp,72v-40amp,96v-50 are also available.we also customize products.

We offer Light Intensity Control System useful for control labs. The light intensity control system is designed to bring out the basic features of closed loop systems in the form of a laboratory experiment. The light panel comprises of a number of filament lamps which get power from amplifier. Average intensity of the panel is sensed by a light sensor and a suitable voltage level is produced. Error detector, reference input and error amplifier are of standard configurations found in any linear control system. In addition to the above, the light panel also contains a few uncontrolled lamps which may be used as disturbance source. Further a square wave signal is available for dynamic response studies. Highlights >>Feedback control of light intensity >>Study of inherent non-linearties-sensor, lamps >>PI control >>Dynamic response displays Experiments >>Characterization of light panel and light sensor blocks >>Study of a practical single loop feedback control system which includes: Disturbance study Error monitoring >>Performance improvement through P-I control >>Evaluation of dynamic behavior Features and Specifications >>Built-in 3.5 digit DVM >>Built-in IC regulated power supplies >>Literature and patch cords included >>Seven lamps 6V/300mA >>5Hz square wave and triangular wave for dynamic response study The experiment is complete in all respect.

Low Iron Solar Glass, Stained Glass Panel, Figured Glass, Clear Float Glas

Solar Bulb, LED Torch, LED Outdoor Lamps, Rechargeable Torche

Solar Panels, Inverter, UPS, Inverters, Solar Charge Controlle

Solar Power Products, Dg Sets, Solar Product

World Class Air Compressor, Air Receiver Tank, Refrigerator Water Chille

Solar LED Street Light Pole, Solar Panels, Solar EPC Servic