UsageFor Pulping of Dry Pulp Sample in Laboratory Scale
Brand NameSTIPL
Container Capacity10, 30 & 50 litres
Consistency5% Maximum (higher Consistency Pulper is also Available Consistency Range upto 35%
Speed500 RPM
BeltsPropeller V-belts Drive and a Circulates the Stock Effectively to Disintegrate Material Rapidly
Glass WoolStainless Steel 316 Vessel Duly Insulated with Glass Wool
Power SupplyElectric Motor 3 Phase 440V, AC.
Definition : The laboratory hydra pulper is used for the de-fibreing of the virgin and secondary fiber in laboratory trial of different raw material for making pulp to measure properties, before making commercial production . A suitable and standard apparatus for making pulp, minerals fibres pulp like mica, asbestos etc.
Device Description : the unit consists of a pulping container with a rotor at the bottom driven by a V belt in the lower part of the unit . the electric motor has an adjustable frequency convertor to regulate the rotational speed . a ball valve at the bottom drains the pulp . an acrylic cover prevents injuries during the pulping process . A smaller opening in the cover allows extra content during pulping.
Test Description : the pulp is torn out by hand into about 2 x 2 cm large pieces and soaked with water , then the pilper is activated to mix the pulp and take apart the single fibres without destroying their structures to a homogenous suspension
For de-fibration of dry samples on laboratory scale.
The unit consists of a pulping container with a rotor at the bottom driven by a timing belt in the lower part of the unit.
The electric motor is adjustable by the variable drive to control the rotational speed.
2 Liters Capacity
5 Liters Capacity
10 Liters Capacity
Other higher capacity pulpers are also available.