Beater RollMade of Heat Treateable Stainless Steel
Diameter193.8 mm & width 152.4 mm
Beater Roll FlybarThickness of Each Flybar is 4.8 Mm and with a Brinell Hardness 350 - 400
Beater roll drum speed500 rpm
Width of the Bed Plate159 mm
Number of Bed Plate Bars7 Bars, Each 3.2 mm Thick Set in Lead 2.4mm Apart with a Brinell Hardness 325-375
Bed Plate DiaphgramThickness of 1.6 mm live rubber.
Lever ArmCasted with Dead Weight 5.5 Kgs.
Power Supply380 V, AC 3 Phase, 1 HP.
Device Description : The laboratory beater is mounted upon a stainless steel construction. The device itself is entirely made of stainless steel as well. The container is capable of holding a volume of 23 liters , therefore 360g of pulp can be beaten with one process .the rolls including the blade are 152mm wide and have a diameter of 190-194mm . the bed knife consists of seven 3.2mm thick stainless steel blades. The knives and bed of the beater are encased by a tank cover in order to ensure safe handling of device.
Test Description : 360 g of pulp in a suspension is put into a beater. Now the suspension needs to be topped up with water until the whole mixture reaches a volume of 23 liters. Three minutes after starting the device a sample has to be taken , After that a weight of 5.5 kg has to be fixed to the lever in order to start the actual beating process. Samples can be taken at regular intervals and the pulp can be used to be tested for example on freeness or to form test sheets.