Ampoule Dealers

Ampoules are the Most Cost Effective Container Used for Packaging and Dispensing of a Wide Variety of Pharmaceutical Liquid Products. the Dimensional Features of Ampoules Should Comply with Their Foreseen Usage and There are Three Most Common Shapes of Ampoules; Flame Cut (form B), Funnel Top (form C) and Closed Top (form D). a Colour Break or Snap-off Ring is Put On the Stem of the Ampoules for Easy Break and Identification Purpose. Ampoules Should Be Made from Very High Quality Glass Tubing and We Use Schott Fiolax Tubing Which Conforms to all International Pharmacopeia Standards. We Supply Ampoules in all Shapes and Sizes and have Resources to Produce Ampoules as per Custom Specifications.

An ampoule or ampule is a small glass sealed vial which is used to contain or preserve a fluid. Pharmaceutical ampoules are most commonly used to contain pharmaceutical hypodermic solutions. They are hermetically sealed by melting the thin top with an open flame, and are designed with a scoring around the neck break ring around the neck a small cut on the neck Ampoules are produced from tubing glass. Tubes are inserted in a carrousel and heat is applied. By applying the right amount of heat and using gravity the shape of the ampoule is achieved.

Using these gases it may be possible to cross-calibrate sensors for other gases and using a beakers of different volumes rating. It is possible of to Calibration at different ranges than the concentration mentioned on the Ampule. Before use, it is important that both the ampoules and the calibration beaker are clean and dry. Ampoules should not be used if the glass is cracked or fractured and the calibration beaker should not be used unless the lid is tight fitting. Because some gases (e.g. Cl2) are easily absorbed it is recommended that the internal surfaces of the calibration beaker Be permeated with the calibration gas prior to actual calibration. This is most easily accomplished by placing an ampoule in the beaker, placing the beaker over the sensor and breaking the ampoule as if performing a normal calibration routine. The ampoule should be left in place for approximately 5 minutes. Calibration-Ampoules Finds applications in wide variety of industries where Detection and control of dust level is critical for the safety, Maintenance , Equipment operation, Plant Efficiency and or the environment. It provides Reliable and Economical Detection of leak and filter Failures in Powder and Bulk Solids industries Stack guard has LED visual Indication and relay output to maximize its user-friendliness and automation capabilities. It incorporates a specially designed adjustable damping system that increases its response time and prevents False alarms

The grain preservation ampoule is made using the ultramodern composition technique. Fumigation process is the main theme in this product. We can keep the stored grains insect less by using this ampoule for long time. It can be safely used for Rice, Wheat, Jowar, cereal etc very easily & with no poison risks. One 3ml quantity ampoule for 100kg grain can keep away all types of insects for more than 12 months. The said product is also approved & referral by the Insecticide Board, Central Govt. of India for the use of stored grain preservation.

Content : Carboxylic Acid & Folic Acid Function : To increase no.of. flowers and to prevents pre-dropping of fruits & flowers Dose : 0.33 ml per Liter of water Recommended Crops :Any Field Crops Horticultural Crops Fruit Crops Application Time : At and after flowering fruiting. Compatibility : Compatible with most of all pesticides fungicidesPGR Pack In : Glass OR HDPE bottles Packing Available : 2 ml Ampoule 5 ml 50 ml 100 ml 250 ml 500 ml 1 Lt Bulk Packing Available : 50 Lt 100 Lt 200 Lt HDPE container

dermfessionell® lifting intensive ampoule   firming | lifting | moisture | anti-inflammatory | reshape | suitable for eyes | suitable for all weather | all skin types   dermfessionell® lifting intensive ampoule acts thoroughly to fight against the signs of ageing. Helps boost the skin’s functions and revitalise it. Restructures intensely and brings back density, tone, firmness, and comfort. Helps protect stem cell habitat. The face is reshaped and brighter. The skin is visibly younger-looking. quickly hydrate and sooth skin irritation after laser facials, laser peels, chemical peels and ipl. Also good for very dry and sensitive or inflammed skin, or persons living in high altitudes. Soothing and relieving effect is almost immediate.

High Speed Automatic Rotary Ampoule & Vial Washing Machine is specially designed to wash Ampoule & Vial with minimum contact of machine parts with container. Machine with specially designed Gripper system holds the container from Neck and invert till the washing operation completed and again after washing release the container on outfeed feedworm system in vertical position ensures positive wash of containers. Machine is suitable to wash various sizes of containers with the help of change parts. Automatic Rotary Ampoule & Vial Washing Machine is widely uses in Pharmaceutical, Veterinary & Biotech industry for performance & cGMP demanding customers.   Salient Features All contact parts with the internal surface of Ampoules/Vials and the wash media are made of AISI SS 316L Stainless Steel Other parts are made from engineering plastic, FDA approved or AISI SS 304 Stainless Steel All finishes, welding joints are processed, treated & equipment selected in accordance with cGMP standards 18 Jets for 6 Internal washing zones 15 Cassette of Grippers each having 2 Grippers Suitable for 1ml to 25ml ampoule & 2ml to 100ml vials Washing sequence can be made as per customer’s requirements 3 Pumps and 3 Tanks of 25 liters each Each washing zone with independent circuit to avoid contamination Automatic Infeed and Exit of Ampoules/Vials Output capacity of up to 240 Ampoules/Vials per Minute   Process Operation Ampoules/Vials feed from the Infeed tray are received on an Infeed Feedworm then moves on Infeed starwheel. The Grippers picks up the Ampoule/Vial from Infeed Star Wheel and invert it in neck down position over washing needles and move along with the needle bar for Washing. On completion of a cycle, washed ampoules/vials are again inverted to neck upward position and feed to output star wheel. Washed ampoules/vials received from output starwheel can be collected on Output Tray or can be pushed to tunnel   Washing Cycle 1st washRecycled Water (WFI) 2nd washCompressed Air 3rd washDM Water 4th washCompressed Air 5th washWater for Injection (WFI) 6th washCompressed Air

Output capacity upto 400 Ampoules / min. All parts that come in contact with the internal surface of the ampoule and the wash media are made of AISI SS 316L stainless steel.

We Offer Glass Ampules (Amber).In all Regular sizes used in Pharma Industries and Research Centers.Manufactured by Latest Technology and Experienced Guidance of Masters Of this field.We assure for Best in its category.

Indications: Flaccidness Stretch marks Alopecia Discription: The ingredients of Collagen Pyruvate ampoules with regenerative properties help break the cells from the deep and superficial skin layer, improving elasticity and hydration .They are particularly indicated for the treatment of flaccidity, stretch marks, aging, strengthening the capillary vessels. The collagen pyruvate ampoules stimulate the fibroblast activity and collagen synthesis. Presentation: 20x2ml.