Flocculation Systems Dealers

Leveraging on our vast infrastructure, we are able to manufacture high grade quality Laboratory Flocculator. Our Laboratory Flocculator is specially designed by our engineers to be used in varied laboratories for uniform stirring of samples. The Laboratory Flocculator made available by us is provided with stainless stirring shafts with adjustable height. The clients can avail these Laboratory Flocculators at very economical price from us. Made Of Mild steel powder coated bodyStainless steel Technical Specifications Variable speed, digital RPM indicatorDigital timer2/4/6 stirrerWork on 220V AC

We are offering pfr pipe flocculator. Coagulation and flocculation by controlled turbulence the pipe flocculator is a plugflow reactor in which processes such as coagulation, flocculator, demulsification, precipitation and ph control can take place under hightly controlled and well defined conditions. the above mentioned processes take place under turbulent flow conditions. At the chemical injection points the pipe diameter is adapted to ensure instantaneous mixing of chemicals and wastewater. Through the cross-section of a pipe the mixing intensity is virtually homogeneous. Reaction time is determined by the pipe length and flowrate and based on the exact requirements, no excess is required. In the plug flow reactor the process can be influenced at any time as opposed to tank reactors, where only one conditions per tank can be maintained.

EIMCO-K.C.P. Flocculator provides agitation for treating process liquids, water or wastewater in circular or square tanks. Available in 1 to 25 HP for chemical mixing and blending coagulants, neutralization and general purpose mixing. When used for flocculation, the unit has extremely high circulation capacity up to 25 times the feed rate. EIMCO-K.C.P. has other types of horizontal and vertical paddle flocculators available for flocculating and mixing applications.    

We are offering flocculation aid dosing system known as "polymat" are specially designed for automatic preparation of polymer solutions either from powder polymers or liquid polymer concentrate as per required gpl or % concentration.

Jar Test Apparatus allows efficient and economical flocculation matter and collides in general and also has been specially designed for use in water treatments to correctly estimate the dosing of alum and such other coagulants for treatment of Water sewage and floc formation test in Water Treatment plants.

JAR TEST     The choice and dosage of the chemical coagulant to be adopted for removing suspended solids from waste-water are established based on an evaluation of the results obtained from the Jar Test. Multiple stirrers with reproducible stirring speeds ensure repeatable and reliable results.     LEACHING TEST     This is a test on solid wastes to be sent to the dump that uses diluted acetic acid or carbon dioxide-saturated water to detect the presence of toxic heavy metals.     JLT 4 AND JLT 6 – JAR & LEACHING TESTS     The JLT 4 and JLT 6 are multiple stirrers with reproducible stirring speeds allowing standard conditions to be met during analysis, a basic requirement in order to obtain reliable and repeatable results. The highly versatile stainless steel stirring shafts offer height adjustment and are fitted with a self-locking device with clutch. The sample can be backlit for easier reading. The instrument has an ergonomic design and the control panel is sloped to facilitate parameter settings and readings. The rotation speed can be set from 10 to 300 rpm, with 1 rpm intervals, the time remaining can be set in hours or minutes.     FP4 – PORTABLE FLOCCULATOR     The FP4 is the portable Flocculator that can be connected to a battery or a car cigarette lighter socket. The anti-skid base ensures stability whilst the highly versatile stainless steel stirring shafts offer height adjustment and are fitted with a self-locking device with clutch. The FP4 is particularly suitable for carrying out on-site Jar Tests.     FC4S / FC6S - FLOCCULATORS     The FC4S and FC6S are highly resistant to chemical and mechanical aggression and corrosion. The highly versatile stainless steel stirring shafts offer height adjustment and are fitted with a self-locking device with clutch. The sample can be backlit for easier reading. Motion is transmitted by four (in the case of the FC4S) or six (in the case of the FC6S) direct current gear motors in order to ensure optimum performance and reproducibility even at low speeds. With 9 different speed settings for each position the instrument is totally flexible; the stirring speed can be set using the selectors on the front panel (10-15-30-45-60-90-120-150-200 rpm). On demand version can reach 300 rpm.

SVE flocculators provide engineers and water treatment facilities with well designed, well crafted, flocculator systems engineered for long life and minimal maintenance. Our Flocculator provides gentle agitation by slow moving paddles. This action serves to break up the mass rotation of liquid and promote mixing. The specially designed flocculating paddles enhance flocculation of the feed solids. Agglomeration of the destabilised colloids is achieved as a result of particulate transport in the flocculation compartment. Increased particle contact will promote floc growth and aids faster settling. Our flocculators are available in your choice of horizontal or vertical configurations for all water applications.

Coagulation and Flocculation by controlled Turbulence The PFR pipe Flocculator is a plug flow reactor in which process such as coagulation, flocculation, demulsification, precipitation and pH control can take place under highly controlled and well defined conditions. The above mentioned processes take place under turbulent flow conditions. At the chemical injection points the pipe diameter is adapted to ensure instantaneous mixing of chemicals and wastewater. Through the crosssection of a pipe the mixing intensity is virtually homogeneous. Reaction time is determined by the pipe length and flow rate and based on the exact requirements, no excess is required . In the plug flow reactor the process can be influenced at any time as opposed to tank reactors, where only condition per tank can be maintained. Generally speaking a pipe flocculator is used where a coagulant, a flatulent and optionally a chemical for pH correction are dosed in sequence for the remove all of turbidity and / or COD or precipitants. The use of a pipe flocculator in combination with a flotation system can give COD removals of up to 95%. K-pack Systems has a wide experience in chemical treatment, particularly in the use and selection of coagulants and flocculantsin combination with a PFR pipe flocculator. The PFR pipe flocculator is exceptionally suitable for our latest developments in the non-toxic biodegradable coagulants and flocculants range. Specific details and characteristics High quality and durable materials like HDPE, PVS, MS pipes. No short-circuiting and hardly any back mixing. No retention time distribution. Homogeneous mixing throughout the cross section. Completely predictable and controlled mixing environment. No moving parts. No additional energy source. All required process conditions and chemical additions in a single unit. Uniform floc growth. Small space requirements. Exchangeable mixing pieces. K-Pack Systems engineers can preform onsite tests to determine Process parameters for coagulation. Flocculation - separation. Chemical and additive requirements. Maximum achievable reductions in pollution load. Available models Standards units are available upto a flow of 400 m3 / hr. Customized units for special applications.

Vertical Shaft Flocculators, Industrial Evaporator, Surface Aerator

Pfr Pipe Flocculator, Tequatic Plus Filters, Dissolved Air Flotation Unit

Flocculator, Water Treatment Plants, Mixer, Industrial Stirrer, Aerator

Flocculator, Mixing Equipment, Thickener, Clarifloculator, Clarifie