Hydraulic Testing Machine Dealers

When it comes to payment, we offer convenient and practical methods to our clients. We undertake both online and offline payment methods which are hassle free and safe for the clients. Owing to our well-established set-up in Kolkata(India), we are capable of catering to the requirements of clients with utter ease.

Testing Capacity : Upto 5000PSI ➣ Optional Accessories :1) Manifold System to test multiple Cylinders.2) All size Adapters / Plugs to suit all types of extinguishers3) Testing Bench Vice4) Testing Case / Cage.

Exceptional After-sales Services of this Hydraulic Grip Universal Testing Machine can be experienced once it is purchased from us. Also, spare parts of this Hydraulic Grip Universal Testing Machine can be purchased from us at competitive rates. This Hydraulic Grip Universal Testing Machine complies with the most stringent of standards set by IS, BS, ASTM and DIN. Details : Complete range of material testing system, Destructive testing (DT) & Non Destructive equipment (NDT)Product conforming to IS, BS, DIN and ASTM StandardsEquipment approved by NPL / NML, NABL, LLOYDS, PDIL, NTPC, BHEL, RDSO, DOI and Railways

Our company is highly esteemed in offering Nano Servo Hydraulic Universal Testing Machine to the clients. These products are manufactured by using high quality material and advanced machines by deft vendors. Offered range is widely used in various industrial applications. Nano Servo Hydraulic Testing Machine can be availed by clients in varied shapes and sizes as per requirement. These products are stringently checked by the quality norms on well defined parameters. Features: Free from defects Smooth finish High strength Technical Parameters: Load Capacities ranging from 5kN to 25kN static & dynamic Servo Hydraulic, Servo controlled electro mechanical and Hydraulic test systems Precision aligned, High Stiffness Loading Frames with stiffness 600kN/mm Advanced Digital Signal Processor (DSP) based control electronics for faster and accurate control Advanced Windows based application software packages as per relevant ASTM standards Test applications to cater Tensile, Compression, 3 â�� Point Bend, Bend Fatigue, Low Cycle Fatigue (LCF), High Cycle Fatigue (HCF), Fatigue Crack Growth Rate(da/dN), Brittle and Ductile Fracture analysis(K1c, J1c, CTOD), Random Loading, Block Programming etc as per ASTM standards Room Temperature and Low/High Temperature (-150�°C to 1200�°C) Tensile & Fatigue rated Grips, Compression Plates, Flexure fixtures, Straingage Extensometers, Video & Laser Extensometers, COD gages, Low/High temperature chambers, High Temp furnaces and many other accessories ISO 9001 â�� 2008 certified manufacturing process Testing contract of materials & components Retrofit of old systems, Annual Maintenance and Calibration contracts under one roof �± 25mm stroke servo-actuators with 1micron resolution Fully integrated and self contained No need of external water cooling arrangements Works out of single phase 230VAC 32 bit next generation DSP based servo controller Accuaracy �±0.5% of read out value for load, strain & stroke 0-100 Hz operatio

Hydrostatic Pressure Testing Machine are used to find out the resistance internal pressure of R-PVC, C-PVC, U-PVC, MDPE, HDPE, LLDPE, PP-R pipes, Fittings, Valves etc. as per IS, BS, ASTM and other equivalent standards.

    Hydraulic testing machine suitable for stainless stell and carbon steel longitudinally welded tubes   Custom made design to suit requirements of water and gas tubes to Oil country tubes   Emphasis on : Material selection     Manufacturing & process selection     Dimensional & geometrical accuracy   Specially designed sealing arrangement for high pressure testing   PLC controlled Auto & Manual cycles   Quick changing type tooling for quick size change   Testing pressure range from 200 to 600 atmosphere   Heavy and rugged heads fabricated from tested carbon steel   Selection of Power pack and intensifier from most standard and dependable sources   Suitable for tube length ranging form 4 meters to 8 meters. Easy & quick length change through adjustable moving tailstock   Single or multi-head design to suit different production quantum requirements .

1.Peak load along with on line load2. Maximum elongation with online elongation3. Ultimate Tensile Strength4. Graphical Display of Load vs. Time5. Graphical Display of Elongation vs. Time6. Graphic Display of Load vs. Elongation7. Graphic Display of Stress vs. Strain8. Complete Statistical Analysis9. Data Report Management

UT-02-XXXX Makron Test System is a single foot print assembly with an enclosure housing controller and hydraulic power pack. The Load frame with a T-slot bed and provision to mount actuator on top may be located on the top of enclosure. These systems are available in the range, 25–50 kN and provide the flexibility to perform static and dynamic tests. These systems are easy to install and usually do not require any additional utilities such as cooling. Just plug i to the closest 15A mains socket and the system is ready for use. Standard Features Up to 100Hz cycling frequency                             Flexible operation                            25/50 kN force rating actuators            50 to 100 mm actuator stroke           Adaptable to wide range of fixtures & grips   Energy efficient pumps User friendly MTL software Single foot print assembly Frame stiffness: 600kN/mm Applications Tension/Compression/3-point bend  Fatigue crack propagation  Fracture mechanics             Room temperature tests  Low/High temperature tests  Low/High cycle fatigue (LCF/HCF)  Damping force measurements  Elastomer testing  Tension/compression/3-point bend  Ductile/brittle fracture  Threshold stress intensity

GRIP JAW TYPE   Optional “open” (C type) or “semi open” (Y type) type grip jaw. Suitable for different test intensity.   Controller   Plug In ready to use PCI control card, suits all kinds of personal computer and main board. Full digital measure and control circuit provided with Load, displacement & deformation different measuring channel. Close loop control by simply software configuration.   EW Series machine, compared with a ball screw type electric mechanical UTM, is adopting oil hydraulic power to push the piston in the oil cylinder to provide loading force. Therefore it is very suitable for making test to different metal or nonmetal materials under high toughness and hardness against extreme big loading force. By using oil pressure transducer and photoelectric encoder, the computer is timely collecting the testing parameters like loading force, stroke etc.The servo system will provide on line close loop control and constant parameters control. The test software is able to create customized testing methods and setup testing report in only a few steps. EW series is widely used in different inspection department, engineering area, universities and institutes.

NAUGRALABS LABORATORY PRODUCT NAME: HYDRAULIC COMPUTERIZED VERSION FOR TESTING LAB NaugraLabs Laboratory Product Code: NLE-Export-111018 Description and Specification for Lab Tenders Hydraulic Computerized Version.  Universal Testing Machine  Application System Peak load along with on line load. Maximum elongation with online elongation. Ultimate Tensile Strength Graphical Display of load vs. time. Graphical Display of elongation vs. time. Graphical Display of load vs. elongation. Graphical Display of stress vs. strain. Complete Statistical Analysis. Date Report Management. Safety Features: Machine stops after specimen failure. Safety against Over travel of piston. Safeguard against high temeprature. Surge Protector. Auto Machine Diagnosis. Safety against overload. PC Configuration: Processor: Pentium IV / AMD 64 BIT. Processing Speed: 2.0 GHZ or higher. H.D. Drive: 80 GB. RAM: 256 MB. CD ROM: 52 X. F.D.D.: 1.44 MB. Colour Monitor: 17" SVGA. Key Board: 104 Key. Printer: Inkjet. Printer: Laser (Optional at extra cost). Mouse Optical. UPS of at least 600 VA capacity Software: Preloaded with window 2000 based software. The Software provided on CD ROM. Automatic saving and providing database for carrying out statistical calculation of multiple test results. Software application shall be capable of providing function like Auto Return to Zero.  Steel & Metal Mechanics Lab equipment manufacturers,exporters and Steel & Metal Mechanics Lab suppliers