PH Indicators Dealers

Ph indicator on line we are instrumental in bringing forth quality range of products that are sternly designed and manufactured using raw inputs that go through various quality checks. We ensure that the inputs are checked beforehand to evade loss. In order to attain maximum client satisfaction, we strictly check the product quality on several counts prior to final dispatch.

High degree of accuracy 0.01 pH Auto/man. Temp. Compensation Auto buffer for quick analysis. High input impedance.Isolated Transmitter for remote monitoring.Front Panel calibration of pH-4 and pH-7.Optional printer interfacing.Panel Mounting flame-proof enclosure.  

It is an economical meter for online measurement of specific TDS of solution using a TDS cell for R.O plant or D.M plant applications. It enables to measure the TDS without manual balancing and specific TDS is read directly on a digital panel. This is available in panel mounting facility in compact size.

Micro Controller Based,Auto Temp. Sensing,Buzzer for Low High pH control,12 V DC output for auto dozing dump. On line pH indicator specially designed for various process control industry.

Item Code:DPH-509 Being a customer-focused organization, we are engaged in offering Online pH Indicator. Advanced technologies and quality raw material are widely used in manufacturing these pH indicators. These are widely widely used in laboratories and widely used as a reagent for staining. Features: External Transmitter near electrode for areas where Instrument is at distant location High Input Impedance with very low Input Current Solution Ground referenced measurements Available in Panel Mount, Wall Mount & Flameproof enclosures

The integrated voltage detecting system LLI conforms with the requirements for voltage detection systems ofthe valid VDE 0682 Section 415 (IEC 61243-5). It is a 3 Phase system with which the following conditions of a medium voltage network are indicated: Voltage not present : No indication Voltage Present 1 Arrow shown for each phase with L1, L2, L3 description Design: The integrated voltage detecting system LLI is located in a panel mounted housing, The display is designed as an LCD in the front, the symbol arrow, corresponding to voltage presence is shown in black. arranged on the front panel are also a LRM test point for connecting a phase comperator for LRM ~ interfaces. As protection against corrosion, the test point is provided with a captive plug. The unit works without external power, the display T LLl gets energised from the measuring signal.   FEATURES Operating temperature: -25 C to +70 C Storage temperature: -30 C to +80 C Protection class: lp54 Connectors for signal leads: fast-on receptacles 4.8 x 0.8 mm Required data for order: capacitance of coupling electrode C1 rated voltage U

MicroSet Instrumentation & Controls reserves the right to make changes to this data sheet or the product without notice, as part of our policy of continued developments and improvements.  

CPH 100 instruments use a special high input impedance input stage for fast and accurate pH measurement. Special electronics ensure that the input impedance is in excess of 1012 ohms. Thisensures that there is minimum error due to the extremely high output impedance of the pH sensors. Since pH is a function of Temperature a PT100 RTD type input is provided for temperature measurement. Temperature compensation can be programmed for each 5 Deg segments. Relay output sare provided for a larm indication as well as control action. Automatic calibration is provided for fast field calibrationOptional features. include RS485 with MODBUS networkcapabilities.Optional 4-20mA output can be programmed between any desired.

GENERAL DESCRIPTION Analogik PH meter and transmitter incorporates the latest high technological advancements. It has very stability, reproducibility & contineous duly cycle. The instrument having very high input impedance advanced (MOS-FET butter OP-AMP) The instrument accepts all types of PH electrode. Auto / manual temp, compensation facility is available. The instrument indicates PH by 3 1/2 digit LED / LCD display. FEATURES Manual / Auto temp, compensation by pt-100 sensor. Direct indication of PH/ mV and temp, by LED/LCD displays. Slope control for correcting electrode slope. Asymetry control to eliminate ageing offect. 0 / 4 to 20 mA output into 500 V incase of PH transmitter. CONSTRUCTION & OPERATION The glass epory, green masked, PCB with high quality components soldered gives the drift free performance. The mV signal from PH electrode is directly given to high I / P impedance buffer amplifier and then this signal is processed. The auto/manual temp, compensation circuit is added at this stage & signal is given to DPM / V to I connector. Thus we get PH indication or 0 / 4 to 20 mA signal proportional to input pH. APPLICATIONS pH meter and PH transmitter are commonly used in many industries & plants. Used in water treatment plants, Power Station, Sugar Mills, Steel Plant, Paper Industry, Chemical, Petro Chemical, Food, Fertiliser, Soft Drink Industries. SPECIFICATIONS pH INDICATOR pH TRANSMITTER RANGE O to 14H. 1999 mV Oto14PH. DISPLAY OUTPUT 3 1/2 digit LED or LCD 3 1/2 digit LCD-local indication optiona 0/4 to 20mA proportional to 0 to 14 PH. ACCURACY 0.25% of F. S. 0.25% of F. S. TEMP.Compensation Automatic with pt -100 manual by pot Oto130°C. 0 to 130 °C. Automatic only. INPUT IMPEDANCE SUPPLY >1012Ohms. 9 VDC, 230 V AC, 50 Hz 1 PHASE >1012Ohms. 9 VDC, 230 V AC, 50 Hz 1 PHASE SLOPE ADJUSTMENT 90 to 110% at 25 °C. 1 90 to 110% at 25 °C. 1 ASYMETRY ADJUSTMENT 1 PH. 1 PH. OUTPUT LOAD - 500 V Max. RECORDER OUTPT