Toroidal Transformers Dealers

We are considered as one of the leading Manufacturers, Suppliers, and Exporters of Toroidal Core Transformer. Our Toroidal Transformer Core is fabricated under the guidance of experts to ensure its premium quality and dimensional accuracy. We conduct a special process with high degree of precision to manufacture Toroidal Transformer Core to meet the diverse needs of Reactors, Chokes and so on. Manufacturing process The manufacturing of strips wound cores is a specialized process, which requires a high degree of precision. These cores are manufactured from selected coils of crgo electrical steel to yield closely controlled electro-magnetic characteristics and dimensional accuracy. Cores are wound after slitting is done as per the required shape, on the core winding machine. The winding machine automatically stops when the pre-decided dimension is reached. The start and finish ends are firmly spot welded. After winding, the cores are stress-relief annealed to restore the magnetic properties. The cores are bonded where necessary, to provide increased firmness. All cores are spray painted or varnished (as required by customers) and are tested for magnetic properties. Testing Strip wound cores, unlike strip lamination, constitute a complete product and every core must meet the specified performance requirement. Consequently, quality control in the manufacturing of wound cores is vitally important at every stage of process. Dimensional tolerances The coils of crgo steel from which the cores are manufactured are carefully selected on the basis of tests carried in our laboratories to ensure that the correct grade of steel is used. Strict checks are made at every stage from winding to the final stage of spray painting & varnishing to ensure that the finished product is of a high quality. Moreover, each core is subject to inspection and electrical tests at BSP to make certain that our customers are provided with the specified performance requirement. Apart from being fully equipped to meet the exacting standards of testing required, BSP possesses the technical knowhow, the research facilities and the necessary raw-materials. Inside Diameter (d)Outside Diameter (d)Height (h)OverUptoTol.OverUptoTol.OverUptoTol.30100+ 1.230100+ 1.50150+ 1.0-0100150+ 1.5100200+ 2.0150200+1.2-0150200+ 2.0200400+ 3.0200500+2.0-0200400+ 3.0400800+ 4.0500+3.0-0400700+ 4.0------ Characteristic It is toroidal and wounded in the same direction of closed flux path, no magnetic leakage, so its magnetic performance is best of all. The coil winding is easy and high efficiency with toroidal winding machine. Application Used in 50 Hz and 400 Hz transformers Current transformers Reactors Chokes Magnetic components of electronic equipments

Miracle Electronic’s Toroidal transformers are more efficient than other transformers of similar power level. Miracle’s Toroidal Transformers are of smaller size, lower weight, make less mechanical hum, possess a lower exterior magnetic field and generate very low off-load losses. Thanks to the lack of residual gap in the magnetic path, Miracle Electronic’s Toroidal transformers also exhibit higher inrush current. Miracle Electronic’s Toroidal Transformer is certainly the ideal choice for your utility. Our Toroidal Transformers are extremely durable, come with superior wiring, varnishing, connection terminators, Tyco / 3D Terminals and are of low profile, generate less acoustic noise, have a low EMR with a low profile. Our Toroidal Transformers are indeed highly efficient and provide excellent regulation with minimal temperature rise. Miracle Electronic’s Toroidal Transformers: A bundle of massive efficiency Our Toroidal Transformers Are RoHS Compliant, Reach Compliant, Also Available with CE and UL Marked with request. General Product Features & Inclusions Self-Lead TEX E Wires PVC Cables Sleeves Connectors L Clamp With CRGO Round cores With Cold Rolled Grain Thermal fuse Thermal switch Class B /F insulation Epoxy Mounting arrangements, Product Variants available: 1, 10, 20 , 25 , 50 ,100, 500 VA ,1 KVA , 5 KVA ,10 KVA Air cooled 120 /240 V 1 Phase-3 Phase 50 Hz-60 Hz – 400 Hz I UU-2 UU Transformer Low height & Low Profile Miracle Electronics also undertakes requests for custom design and development of Toroid Transformers.Please contact our Customer Support Team for more details.

we are one of the leading manufacturer, supplier and exporter of wide range of ToroidalTransformer in Ahmedabad, Gujarat, India. The offered product is manufactured by our expert professional utilizing high grade copper, other magnetic materials and advanced techniques. These Taroidal Transformer used in large majority in the application where the lower power is required. Used in anapplication in industrial electronics as amplifier, charger, rectifier and other devices. This Transformer can be square, rectangle or circular shape. Available in various sizes, shape according specification given by our clients. Moreover, these Transformers can be available at a very nominal rate. Key Features Small in size Compact design High electrical efficiency Effectively deployed heating Low noise Low maintenance cost Application of AC Synchronous Motor Telecommunication system Automotive electronics Industrial Electronic Power Distribution equipment Audio system

The Toroidal Transformers are manufactured by using High Quality Grade CRGO and CRNGO cores as per customers specification. Toroidal Transformers work more efficiently with low Stray Magnetic field.

  Rogowski Technology of Current measurement With its over 20 years of experience in Toroidal Technology Salzer- Engineers have pioneered the design, development and manufacturing of Rogowski coils and we have been supplying the Rogowski Coils to various OEM’s worldwide.   A Rogowski coil, named after the German Physisct Walter Rogowski, is an electrical device for measuring alternating current (AC) or high-speed current pulses.    It consists of a evenly wound helical coil of wire with the lead from one end returning through the centre of the coil to the other end, so that both terminals are at the same end of the coil. The winding is done on a non-magnetic/non-metal former of constant cross sectional area. The whole assembly is then wrapped around the straight conductor whose current is to be measured. The speciality is there is no metal (iron) core.   01 Rogowski coils have been used for the detection and measurement of electric currents for decades. The voltage output is proportional to the rate of change of current. This voltage is integrated, thus producing an output proportional to the current. 02 Even though Rogowski Coils are low power sensors, the protection system is immune to external electromagnetic fields. 03 Rogowski Coil can replace CTs for protection, metering, and control purposes. 04 Rogowski Coils are accurate, small, light, and easy to install. They do not saturate. 05 Rogowski Coils provide superior differential protection for power transformers, substation bus bars, generators, and large motors. 06 Rogowski Coils do not create hazards for personnel with open secondary, as Conventional current transformers. Specifications 01 Range : Frame 1- Upto 2000AMPS 02 Range : Frame 2- Upto 4000AMPS 03 Range : Frame 3- Upto 6400AMPS. Frame 3 is provided with Two Rogowski Application 01 Sudden short-circuit testing 02 Monitoring arc furnaces 03 Lightning test facility 04 Monitoring weld quality 05 Protection of slip-ring induction motors 06 Electromagnetic launchers 06 On-line insulation discharge monitoring 07 transient measurements.

Product DescriptionThe cores of Toroidal Transformers are constructed by tightly winding one long continuous silicon steel tape into a spiral. This core does not require lamination steel punching, since it is one continuous length of material. Flux leakage is kept to the minimum. The tape-wound core is one of the most efficient of core- designs available.E-I Transformers are being replaced by Toroidal or ring type transformers manufactured on CNC machine.Salient FeaturesToroidal Transformers have the following advantages over the E-I type:1. Low weight2. Small dimension3. Low hum and noise4. Easy one bolt mounting arrangementTechnical Specificationsa) Custom-designed toroidal transformer.ApplicationsElectronics/ Electrical Industries.Power condition equipments , UPS, Inverters, Control panel, Power supplyMedical equipmentIndustrial /Ship lightingAudio systemsAC adaptorsAny other special applicatio

Miracle Electronic’s Toroidal transformers are more efficient than other transformers of similar power level. Miracle’s Toroidal Transformers are of smaller size, lower weight, make less mechanical hum, possess a lower exterior magnetic field and generate very low off-load losses. Thanks to the lack of residual gap in the magnetic path, Miracle Electronic’s Toroidal transformers also exhibit higher inrush current. Miracle Electronic’s Toroidal Transformer is certainly the ideal choice for your utility. Our Toroidal Transformers are extremely durable, come with superior wiring, varnishing, connection terminators, Tyco / 3D Terminals and are of low profile, generate less acoustic noise, have a low EMR with a low profile. Our Toroidal Transformers are indeed highly efficient and provide excellent regulation with minimal temperature rise. Our Toroidal Transformers Are RoHS Compliant, Reach Compliant, Also Available with CE and UL Marked with request.   Product Variants available: 1, 10, 20 , 25 , 50 ,100, 500 VA ,1 KVA , 5 KVA ,10 KVA Air cooled 120 /240 V 1 Phase-3 Phase 50 Hz-60 Hz – 400 Hz I UU-2 UU Transformer Low height & Low Profile General Product Features & Inclusions Self-Lead TEX E Wires PVC Cables Sleeves Connectors L Clamp With CRGO Round cores With Cold Rolled Grain Thermal fuse Thermal switch Class B /F insulation Epoxy Mounting arrangements

We are functioning from Bangalore(India); we are capable of serving the clients in a short time span. We have a team of expert quality analysts that stringently checks each and every stage for ensuring quality products at buyer's end. The Toroidal Transformer, supplied by us, is manufactured in compliance with the established industrial standards. Our Toroidal Transformers are designed using the cutting-edge technology.  

A toroidal transformer has ring type core made from cold rolled grain oriented ( CRGO ) Silicon steel strip without any joints and annealed for stress relief after being wound. These wound cores are then suitably insulated by class B insulation and the winding of copper wire is usually done by winding machines.The core being continuous, without any air gap and the path of flux being along the direction of grain orientation, gives an opportunity for optimum use of flux density, besides very low iron loss and exciting current. The primary and secondary windings are closely linked magnetically. Therefore the leakage fluxes and reactance are negligible. A toroidal transformer has its winding spread over the entire periphery of the core. This results in largcr area for dissipating the heat. Till recently all such small low voltage type transformers needs were met almost universally by traditional or conventional El transformers. Now materials are easily available, so it has been possible to develop 'LOW VOLTAGE TOROIDAL TRANSFORMER' giving a whole set of advantages and wide range of applications in place of conventional transformers.

As we are the name on which the customers lay their trust for quality, as we are supplying the finest Toroidal Transformers and Magnetics. We, being a customer centric organization, make sure that the transactions are carried out by the professionals so as to avoid any kind of confusion. We sternly maintain payment records for the satisfaction of our clients.

Matchless excellence is showcased by the Toroidal Voltage Transformers, which we provide. We are amidst the renowned Manufacturers and Suppliers of the Toroidal Voltage Transformers, located in Thane (Maharashtra). These Toroidal Voltage Transformers are acclaimed for their long-life and ease-of-installation. In addition, we provide these Toroidal Voltage Transformers at reasonable rates. Minimum Order Quantity : 500 pieces

Avail from us an impeccable range of Toroidal Transformers that finds applications in various industrial areas. Our array of Toroidal Transformers is manufactured using automatic special purpose toroidal-winding machines. These transformers are highly in demand in the market, owing to their high quality and optimum efficiency. Besides, our range of Toroidal Transformers can be availed in varied dimensions and sizes at the most reasonable price. Preferred for : Quieter operationCorrosion resistanceLow stray magnetic fieldsLight weightDimensional accuracyNo air gapsCompact design Benefits : Reduction of assembly timeSavings in copper Applications : Medical InstrumentsPower SuppliesAudio/Video EquipmentSecurity Systems