Corrugation / Pasting Gum Powder Dealers in Islampur, Sangli (1 products available)

  • Grodex Corrogum Dlx- Corrugation gum powder

    Grodex Corrogum Dlx- Corrugation gum powder

    Get Price Quote

    • Application: Cold Process Corrugation in Corrugated Board Industry
    • Base: Modified Tapioca Starch (vegetable Base).
    • PH: 7
    • Shelf Life: Shelf Life of Powder is 12 Months from the Date Of.
    • Viscocity: 18 Seconds At 1: 5 Water Mixing Ratio.
    • Mesh: 120 Mesh.
    • Pot Life: Pot Life of Gum is Only 36 Hours, if Kept Hygienically.

    Preservatives : Do not add any preservatives in it. Addition of Preservatives may reduce viscosity and adhesion of the liquid gumHigh Coverage : Corrogum has very low viscosity of 18 seconds at 1 : 5 Water mixing ratio. Therefore lifting of the gum on the roller will be negligible. Please make sure that sufficient. Gum quantity is released thru roller. Compared to any other glue, COROGUM will give you 2 to 3 times better coverage.Heat Drying : This gum gives instant bond on drying as soon as it passes through heater. No need to wait for air drying. Instant bond and instant drying of liners at the point of heating are its unique features. No need to wait for liners to dry out. You can simply proceed for pasting of liners. Complete tearing off of fibres as soon as liner comes out of heater, is guaranteed. Perfectly suitable for high B/F and high gsm papers. Better Result : For faster drying / curing of sheets, Low warpage, more B/S,More compression and better feel to bare hands, etc. always prefer To work with high solids and low viscosity.How to Prepare : Tale entire 175 Ltrs of water in a gum vessel. Start stirrer and add gradually grodex corrogum powder to water. Let entire powder dissolve in water. It takes 5 to 10 minutes powder to get dissolve in water.Continue stirring for 20 to 25 minutes. Milky white gum is now ready. Do not use gum immediately after preparing. This gum will give better results if kept overnight. Always stir well before taking it to corrugation machine from gum vessel. Anti Fungus : The product has been given anti fungus treatment in the Manufacturing process itself and therefore actual users are requested not to add any Anti Fungus Chemicals to it. Such addition may reduce viscosity and Pin Adhesion of the gum.   Note : All above information is based on findings in our laboratory and results may vary at the actual floor level at the time of its consumption, depending upon hardness of water, heat and humidity in the atmosphere, cleanliness of the gum vessel, gum trey and gum roller.

    more..
Filter by Locality
top