Paras Enterprises Kupwad, Sangli, Maharashtra

Tubing is used for in environments involving high temperatures and/or corrosive fluids. Pneumatic tubing is also available in a number of other materials both with and without reinforcement for use in standard applications. Fittings incorporate a positive tube seal while the fitting is under pressure which allows polyurethane tubing to be used.

We are providing you any type of pipe fittings...viz. Brass Compression Type Fittings,Flare Refrigeration line Fittings,S.S.Swagelok Type Fittings,Quick Connecting Fittings,Metric size Carbon steel Fittings for Hydraulic line,Welding Nipple & O'ring Type Fittings,Triclover Fittings etc. for connecting your S.S./Brass/Copper/M.S./G.I./P.U./Nylon/Teflon Pipes. and various Rubber Hoses and Bellow Pipes.

A large metal basket or frame on wheels, used for transporting heavy or large items, such as supermarket purchases or luggage at an airport or railway station. Available in Single/Double ball bearing/with brakes All Sizes and Load Capacity. Types of Trolley Wheels: Polypropylene (PP) Trolley Wheels Polyurethane (PU) Trolley Wheels Nylon Hi-Temp Hard Rubber Trolley Wheels Pneumatic Trolley Wheels Thermoplastic Rubber Trolley Wheels

A timing belt is a part of an internal combustion engine that synchronizes the rotation so that the engine's valves open and close at the proper times during each cylinder's intake and exhaust strokes. In an interference engine the timing belt or chain is also critical to preventing the piston from striking the valves. A timing belt is usually a toothed belt -- a drive belt with teeth on the inside surface. A timing chain is a roller chain.

This style of bearing is designed to handle large radial and thrust loads—as a result of their load versatility, they are found in car hubs due to the extreme amount of both radial and thrust loads that car wheels are expected to carry.

A steam trap is a device used to discharge condensate and non-condensable gases with a negligible consumption or loss of live steam. Most steam traps are nothing more than automatic valves. They open, close or modulate automatically. Available in Single/Double ball bearing/with brakes All Sizes and Load Capacity. Types of Steam Traps: Mechanical Steam Traps Thermodynamic Steam Traps Thermostatic Steam Traps

The brass fittings and stainless steel one touch fitting series are compact and lightweight. These two options offer even more configuration variations of one touch fitting designs and tube sizes.

Speed Control Valve is also termed as the Final Control Element. The opening or closing of Speed control valves is usually done automatically by electrical, hydraulic or pneumatic actuators. Positioners are used to control the opening or closing of the actuator based on Pneumatic signals.

Specially designed one touch fittings are available for use in demanding pneumatic application environments. Fluor polymer fittings are available for use in clean room environments and swivel fittings can be used for rotary applications. Spark resistant fittings are appropriate for use in welding operations.  

There are, of course, several kinds of bearings that are manufactured for specific applications, such as magnetic bearings and giant roller bearings.Magnetic bearings are found in high-speed devices because it has no moving parts—this stability enables it to support devices that move unconscionably fast. Giant roller bearings are used to move extremely large and heavy loads, such as buildings and large structural components.

A solenoid valve is an electromechanically operated valve. The valve is controlled by an electric current through a solenoid: in the case of a two-port valve the flow is switched on or off; in the case of a three-port valve, the outflow is switched between the two outlet ports. Multiple solenoid valves can be placed together on a manifold. The Following are the types: Plastic Solenoid Valves High Frequency Valves High Pressure Valves Direct Acting Valves

Brand Name : ANY

Material : BRASS/ALLUMINIUM/S.S./FORGED STEEL

Certification : NA

Media : AIR/WATER/OIL/GAS/FLUID

Port Size : 1/8

Temperature Of Media : 100 D CENT

Diaphragm Type Solenoid Valve High Pressure (110 Bar) Solenoid Valve High Pressure (40 Bar) Solenoid Valve Steam Solenoid Valve Low Pressure Solenoid Valve Diaphragm Solenoid Valve Pilot Operated Solenoid Valve Direct Acting Solenoid Valve Low Pressure Direct Acting Solenoid Valve Direct Acting Solenoid Valve Dust Collector Valve Union Type Pulse Valve Dust Collector Pulse Valve

A mechanical seal is a device that helps join systems or mechanisms together by preventing leakage, containing pressure, or excluding contamination. The effectiveness of a seal is dependent on adhesion in the case of sealants and compression in the case of gaskets.  

A safety valve is a valve that acts as a fail-safe in a thermal-hydraulics plant. An example of safety valve is a pressure relief valve (PRV), which automatically releases a substance from a boiler, pressure vessel, or other system, when the pressure or temperature exceeds preset limits.

Roller thrust bearings, much like ball thrust bearings, handle thrust loads. The difference, however, lies in the amount of weight the bearing can handle: roller thrust bearings can support significantly larger amounts of thrust load, and are therefore found in car transmissions, where they are used to support helical gears. Gear support in general is a common application for roller thrust bearings.

Roller bearings are designed to carry heavy loads—the primary roller is a cylinder, which means the load is distributed over a larger area, enabling the bearing to handle larger amounts of weight. This structure, however, means the bearing can handle primarily radial loads, but is not suited to thrust loads. For applications where space is an issue, a needle bearing can be used. Needle bearings work with small diameter cylinders, so they are easier to fit in smaller applications.  

High-quality quick-action coupling made of steel, stainless steel, brass or plastic for practically every application contingency.Very robust, rapid and secure coupling of practically all fluid media. Special solutions for your application needs can also be implemented upon request. Types of Quick Release Coupling: Single Check Valve Couplings Double Check Valve Couplings Straight Thru Couplings Cam & Groove Couplings Tube Coupling

A Valve which immediately opens its outlet to exhaust, whenever the pressure of the air decreases at the inlet.

A quick connect fitting, also called a quick disconnect or quick release coupling, is a coupling used to provide a fast, make-or-break connection of fluid transfer lines. Operated by hand, quick connect fittings replace threaded or flange connections, which require wrenches.

A simple machine consisting of a wheel over which a pulled rope or chain runs to change the direction of the pull used for lifting a load. Combinations of two or more pulleys working together reduce the force needed to lift a load.

A pressure regulator is a valve that automatically cuts off the flow of a liquid or gas at a certain pressure. Regulators are used to allow high-pressure fluid supply lines or tanks to be reduced to safe and/or usable pressures for various applications.

Type : Poultry Sheds

Material : FRP, Galvanized Steel, Metal, Steel

Shape : Rectangular, Square

Application : Poultry

Thickness : 10mm, 15mm, 20mm, 25mm

Color : Black, Blue, Green, Transparent, Yellow

Condition : New, Used

Feature : Corrosion Resistant, Durable, Fine Finish, Tamper Proof

Height : 10feet, 12feet, 14feet, 16feet, 18feet, 8feet

Type : Poultry Drinking Plant, Poultry Drinking System

Application : Poultry Farming

Weight : 100-1000kg Per Unit

Color : Brown, Light Blue, Light White, Sky-Blue

Voltage : 110V, 220V

Condition : New, Used

Power : 1-3kw, 3-6kw

Driven Type : Electric, Hydraulic

Warranty : 1yrs, 2yrs

Automation Grade : Automatic, Fully Automatic, Manual, Semi Automatic

A pneumatic filter is a device which removes contaminants from a compressed air stream. This can be done using a number of different techniques, from using a "media" type that traps particulates, but allows air to pass through to a venturi, to a membrane that only allows air to pass through.