Balaji Construction Machines & Spares MIDC, Satara, Maharashtra

Main Features :1. Accurate screening and separation with high production yields at the same time.2. Totally-enclosed design with unitized screen frames, easy to assemble, clean and maintain.3. Automatic screen mesh cleaning device-bouncing balls prevent the screen surface from blinding.4. The machine has one to three screen decks, producing up to four grades (separations).5. Smooth operation, low noise, environmental protection

We are Manufacturer, Exporter, Supplier of our product range and our setup is situated in Satara, Maharashtra, India. These are technically balanced for optimum even vibration all over. The speed of mould passing on table is also adjusted to its full capacity. There are made of heavy duty components for much longer life.Since it has inbuilt foundation frame, no separate foundation is required on site. It has powerful, rigid vibrator fitted on spring steel.Main Features : Made of 10 mm thick MS Plate. Base Frame made of 100 X 50 MS Channels. Good Quality Vibrating Pads, Vibrator Easy to Shift from One palce to another place. No Foundation required Mould Passing Time -40 Sec. Table Size 3ft x 10ft

Our firm is involved in rendering Tower Hoists that are offered to the clients at market leading prices. These are manufactured using fine quality raw material that is sourced from authentic vendors of the market. Further, these possess prime winches that help in the smooth functioning of the equipment. We also customize these as per clients' requirements.  

Power : 15 HP / 18 HP diesel engines, 12.5 HP electric motor.

Good Quality Vibrating Pads, Vibrator, Easy to Shift from One palce to another place. Mould Passing Time -40 Sec. Base Frame made of 100 X 50 MS Channels.

Thickness : 10 mm

These are designed to mix concrete very well at minimum water cement ratio. It has sturdy long lasting construction. It is supported with digital water meter. So that exact quantity of water is supplied to the concrete batch. Mixing arms are made of alloy steel. Those can be replaced easily. Hard cast lining is provided all around and at bottom. Those are very much power efficient.

Ready mix plaster Low machinery cost ranging from 2 lacks to 50 lacks as per production capacity required. The sand is washed and cleaned before mixing, which gives maximum strength with minimum quantity of cement. No crack developments in plaster, which will avoid leakage and dampness in walls. No wastage of costly sand in sieving, which ultimately saves a lot of cost. Since it is screened for proper gradiation and washed before mixing, the best quality is assured, which will give very smooth, plaster. leveled excellent quality Due to controlled factory mix design the quality of product is consistence.

• Low machinery cost ranging from 2 lacks to 50 lacks.• Maximum strength with minimum quantity of cement.• Due to controlled factory mix design the quality of product is consistence.• With few Chemical additions, plaster and mortar without water curing is also possible• With uniform mortar thickness the wall construction becomes sturdy

Main Features : • Extra Heavy duty shell and frame• Auto Digital Water Dosing• Low Maintenance High Performance• Fast Effective mixing• Heard Steel Blades / arms

Main Features : • Mould resting tables• Mode of ms angels• 10 gauge MS sheet

Fully automatic PLC controlled machine. Hydraulic pressure-63 Tons. Single person operated. Maximum strength achieved is M-40. Fully automatic, manual or single cycle operations supported.Heavy duty robost body.

Power : 15 HP

we are manufacturer, exporter, supplier of our product range and our setup is situated in satara, maharashtra, india. Paver block demoulders ( demolders ) is the well designed compact equipment to remove concrete paver from rubber molds. It is the most laborious and critical operation in paver production. We have made it very easy. The other advantages are, a lot of saving in space, since you need not spread the pavers on ground for lacquering. Double operation of collecting the pavers is avoided. de molding manually is very difficult and laborious operation. All the labor fatic is removed, which will give a good production. it is very effective particularly in winter season.

Additional Features : Main Features : •  12 mm thk. MS Plate and 10 mm thk. High manganese wear plate at bottom. •  8 mm thk. MS outer shell with 6 mm thk•  High manganese plate both fitted properly•  Gear mounting housing made of 12 mm MS Plate with high manganese wear plate protection.•  25 mm thk. gear mounting plate with flange etc.•  Graphically designed discharge door with very sturdy and robust hinge.•  Door Pneumatic or hydraulic operated.•  Both the arms and blades detachable for easy maintenance.•  Spring action to absorb shocks for arms type mixer.•  Arms made of 60 mm dia. Hardened steel and blades with special hardening treatment•  Wear blade hardness above 60 hrc.•  Top cover to avoid dusting with material intake openings with proper oiling arrangement and easy fittement. • Heavy Duty Body Structure• Planetary gear box with SIMENS motor• Bottom plate 12 mm thick M.S. + 10 MM High Manganese• Outer Shell 08 mm thick M.S. + 10 MM High Manganese• Gear Box mounting housing made up of 12 mm M.S. with high manganese• Wear protection plate 25 mm thick with flange for gear mounting• Arms with 60 mm dia. Hardness above 60 HRC• Hardened steel blades with hardening treatment• Hydraulic or pneumatic operated designed Door opening• Spring type shock absorbing system in arm type mixer• Both arm and blades are detachable for easy maintenance• Top cover is provided for avoid dusting at inlet.  

3 Separate bins with load cells for different material weighing.Hydraulic skip to unload material. Auto digital water dosing.Panel board showing separate weights of each material.Auto hydraulic pneumatic operated door. Total system PLC controlled. Fully auto or manual operations.Rigid and heavy duty body.Cover to pan mixer, which avoids dust expelling and also serves as inspection window. High manganese wear plate from all inside, replaceble

Additional Features : •  Heavy duty strong machine made of MS Plates•  Manual and fully auto operating systems•  Only one Semi skilled operated can run the production• Total four Persons require of per shift• Polyhydran / Standard make hydraulic spares• Rubber hoses and standard ms pipes• Only Uni paver blocks are produced• Very Easy to Required• No Foundation Required

Main Features : • 8mm MS plate drum,• 3 HP planetary Gear box with motor.• Mounted on suitable MS angle frame• Locking arrangement etc.

We are Manufacturer, Exporter, Supplier of our product range and our setup is situated in Satara, Maharashtra, India. We have specially designed this for through mixing of First layer. Planetary type gear box is provided for the excellent concrete mix with less water cement ratio. Since the mixer drum is not rotating we can fix auto dosing concrete conveyor to this mixer. This will increase the productivity as well as Quality of work. Easy to wash and clean for fast color change. Mixer is provided with auto weighing and digital water dosing system. This will insure the quality consistency of the final product.Main Features : 8mm MS plate drum 3 HP planetary Gear box with motor. Mounted on suitable MS angle frame Locking arrangement etc.

We are Manufacturer, Supplier, Exporter of Interlocking Concrete Block Making Machines and our setup is situated in Satara, Maharashtra, India.   Additional Features :  •  Fully automatic PLC controlled machine. •  Hydraulic pressure-63 Tons. •  Single person operated. •  Maximum strength achieved is M-40  • Fully automatic, manual or single  cycle operations supported. • No wooden paletes required. • Heavy duty robost body.

Multiple Products, No Wooden Pallets Required, Auto Ramming Arrangement, Vibrator for Best Quality Compression, Hydraulic Cylinder for Auto Ejection.

Capacity : 1200 Bricks

We are Manufacturer, Supplier, Exporter of Hollow Core Wall Panel Machines and our setup is situated in Satara, Maharashtra, India.     Main Features : • Manufacturing panels in various length and size.• Very light in weight ( Density = up to 40 (Kg/m3)• Best strength up to 40kg / cm 2• Less mortar and no need plaster after the installation.• Tongue and groove joining system : fast installation and time-saving.• Higher 50% reduction in cost.

We are Manufacturer, Supplier, Exporter of Four Wheel Travel Trolleys / 4 Wheel Travel Trolley and our setup is situated in Satara, Maharashtra, India.   Main Features : • Made of MS Sheet supported with MS Angles• Four Special Trolley Tire wheels• Necessary pulling & turning arrangement

  Fully Automatic, PLC controlled,Hydraulic Machine Motor SIMENS 10 Hp Hydrolic Pressure 63 TonVedol 68 Oil with 300 ltr. Oil tank Yuken India ltd. Make Control valvesHeavy Robust Metal Body for long lifeNo foundation required Operating Fully Automatic and Manual operatedNo Wooden pa'llets Required Plant Machine Requirements Required MouldsMixer 400 kg 7.5Hp (1 nos)Conveyor - 6 meter with 3 Hp motorProduct strength M-40

We are Manufacturer, Supplier, Exporter of Egg Laying Type Concrete Block Machines and our setup is situated in Satara, Maharashtra, India.  

Main Features : • Hinge type door for easy unloading.• Sheet metal covering, to avoid color wastage.• Solid rigid body and drum.• Useful for double color paving blocks.

Since inception, our corporation is considered as one of the topmost manufacturers and exporters of Construction Processing Machines. Widely used in the construction industry for different applications, our machinery is well accredited in the market for its easy installation and user-friendly design. Our entire range of machine is rigorously tested on various quality parameters to ensure its international quality standard. We are offering this Construction Processing Machines to our patrons at cost effective prices.

Main Features : • Conveyor belt with electric motor & Worm Gear.• Standard Idler rollers mounted on ms frame• Belt tightening Arrangement• One Year Warrantee• Idler Roller made of 100 mm x 3 mm thk. M.S. Pipe• Standard Pedestals etc.• Revers Belt Interlocking.