Thyristor Controllers Dealers

Thyristor - CD3000M 2PH 15A to 700A DC Logic/Linear, ZC/BF 24V to 600VAC Supply, DC Logic, 4-20mA, 0-10V DC linear or 10K potentiometer inputs. CD3000M-2PH is a digital and universal Thyristor unit fully configurable via serial communication port. A fully digital and universal Thyristor, configurable via RS485 serial communication port or dedicated configuration port for all inputs, firing & performance parameters. Configuration software available as a download at no cost. Overview: Two leg switching of three wire star or delta resistive loads  Suitable for loads up to 700A Microprocessor based electonic circuit fully isolated from power Universal input signal with automatic zero/span calibration Universal firing, customer configurable via serial port for zero crossing (ZC) and burst firing (BF) modes RS485 comms, MODBUS protocol included as standard Heater Break circuit microprocessor based to diagnose load failure and short circuit on Thyristors as option IP20 Protection

Thyristor units are fast and accurate power controllers which control electric currents using semiconductor devices called thyristors.

Fotek Thyristor controller is having CE certified in compact version, i think we are the most advance product which has CE in thyristor & power regulator apart from this we have We are dealing wide range of products in Fotek India proximity sensor, photoelectric sensor, ssr, relays, light curtain, temperature controller, thyristor controller, timers etc.

Fotek Thyristor controller is having CE certified in compact version, i think we are the most advance product which has CE in thyristor & power regulator apart from this we have We are dealing wide range of products in Fotek India proximity sensor, photoelectric sensor, ssr, relays, light curtain, temperature controller, thyristor controller, timers etc.

We supply Thyristor Power Controllers to all our clients. This is an important electronic device that is employed in numerous electronic circuits. We supply these to our loyal clients who regularly purchase from us in bulk and marginal sized quantities. Our delivery services are reputed to be prompt and supply the goods securely packed without any kind of loss in quality or quantity.

  With wide and rich industrial experience, we are able to offer Thyristor Power Controller that includes Single, Two and Three Phase Heater Power Controller. We monitor the quality control process with utmost care to deliver defect free products to our clients spread all over the world. The well known features are reliability, robustness and efficiency. These heater power controllers are installed in huge industries to obtain in proved productivity and efficiency. These controllers have a wider acceptability for its extreme performance rate. Specifications: Available Ratings: 3 KW single phase to 300 KW three phase Available configuration: Single phase, two phase, three phase (3 or 4 wire star and 6 wire data) Control action / Control signal: Phase angle control (self synchronized) (4-20)mA/(0-5)VDC/(0-10)VDC/potentiometer (control signal available from PID temperature controllers Output: Suitable triggering pulses to fire back-to-back connected SCRS. Smooth control: Adjustable ramp up and ramp down time for soft increase and decrease of output voltage Current control: Using current limit and trip setting on card. (LTC-13) Settings: For adjusting voltage and current per phase Load Type: Suitable for both resistive and inductive/transformer load (15 A to 300 A @ 110/230/415 VAC) Availability: In the form of 1, 2 & 3 phase triggering cards, complete thyristor power pack or ready to use control panel with suitable PID pr program controller. Triggering cards are also suitable for 1 & 3 phase rectifiers.

Down-opened Panel, easy for fuse replacement, Build-in buffering output adjustment (SFS VR), adjusting range 1~22 seconds. (Only for the phase control product), Top & bottom shielding covers are designed for safety and fashion out looking, also easy for wiring installation, In case of 0.5 Hz sudden power losses, system output can be switched off immediately. Once the power is restored, the system will buffer the output to prevent the voltage surge for fuse burn-down, In cases of SCR overheating or fuse burn-down, the system output is stopped immediately. Once the malfunction is eliminated and power is restored, the system will buffer the output to prevent the fuse burn-down.

The thyristor family of semiconductors consists of several useful devices; the most widely used devices of this family are silicon controlled rectifiers (SCRs), Triacs, SIDACs and DIACs. In many applications these Thyristor Controllers perform key functions and are real assets in meeting environmental, speed and reliability specifications which their electro-mechanical counterparts cannot fulfill. We are dealers in Thyristor controllers for varying load applications at convenient market rates.   Essential Points Single Phase (230 V) : 20 A - 80 A (With Neutral)       Three Phase (230 V) : 20 A - 80 A (With Neutral)       Three Phase (415 V) : 20 A - 80 A (With out Neutral)       Slow Start : The output can be started slowly by internal adjustment.       Frequency : 50/60 Hz       Output Voltage : 0-97% output       Applicable Load (A) : Resistance load       Applicable Load (C) : Resistance load, Inductance load, Transformer load       Input Signal : 4-20 mA, 1-5V DC, 0-10V DC, VR adjustment by Manual       Cooling System : 30A 40A self-cooling, other by forced air cooling       Ambient Temperature :-10oC~55oC, below 90% humidity    

Modular Design Software Configurable Quick Start Easy Setup Advanced Configuration using Graphical Wiring Editor Predictive Load Management Flexible Communications