Filter Press Dealers

Solid-liquid seperation dewatering hazardous wastes, sludges, reclamation of solids and recovery of chemicals solution. Recessed, gasketed PP plates with manual or air operated Hydraulic enclosure having models upto 50 cu. ft., plate sizes 355 x 355 mm to 1200 x 1200 mm. Used by Chemical Mfrs. and in Effluent Treatment Plant.  

Standard flow type : the impure liquid to be filtered is fed to the filter shell by pump. It arrives on top of each plate through opening on the sides of plates. As liquid pressure increases, the filter media (paperfabric) holds back the impurities & allows the crystal clear filtrate to pass through the central channel (formed by interlocking cups) which takes the filtrate to the outlet of filter. This filter most commonly used to obtain clear liquid. However if required, the cake formed between the plates can be obtained. Filtration is continued until its rate becomes very slow due to increased cake resistance.

TECHNICAL SPECIFICATION:-   Available in varying size of 8”/ 14”/ 18”/ 24” dia of plate with various combination of on of plates. Reverse flow design for practically zero hold-up. Offered on common skid with filter aid dosing system. Shell thickness is suitable to withstand higher pressure for long time. Diaphragm type SS 316 / SS 304 pressure gauge. Suitable pump can be integral part of the assembly.  

We offer Membrane Filter Press Plates, which have a chamber below the drainage surface that can be inflated. The common method used is water pressure, which is generated by pumping into the squeeze cavity to inflate the face of the plate against the filter cake. The Membrane Filter Press Plates, which we offer, is sold under the brand name of Yotana. These Membrane Filter Press Plates are used to reduce the cake moisture content & shorten the filtration cycle time. Mix pack membrane are the most common configuration (one recessed plate then one membrane plate alternate in the press plate pack). We make available the Membrane Filter Press Plates, which are used for usually operating at a feed pressure of up to 7 bar and squeeze pressure up to 15 bar. These Membrane Filter Press Plates can be designed for higher feed & squeeze pressure. Replaceable membranes can easily changeable. EPDM thermoplastic and other compounds are used for specific conditions. Details Payment Terms : T/TPackaging Details : Necessary Packing done in wooden boxesDelivery Time : 3 - 4 Weeks

Most widely-user friendly filter press Opening & closing is done hydraulic cylinder & power pack assembly Hydraulic cylinder is designed for thefilter press locking instead of ratchet pinion locking Two types of Hydraulic locking system available Hydraulic cylinder with mechanical lock not pull back type hydraulic cylinder operated by control panel Hydraulic cylinder capacity : 30 to 300 mt,stroke : 150 to 2500mm.