Tilting Table Dealers

Enhanced Machining Capabilities: A Tilting Rotary Table allows machining on multiple faces of a component in one setup, reducing time and increasing productivity. Complex Geometry: It simplifies the process of machining angular surfaces, contours, and spherical designs. Precision and Repeatability: Ensures exact positioning and alignment for high-accuracy machining. Reduced Setup Time: Eliminates the need to reposition the workpiece, minimizing errors and downtime. Versatile Applications: Suitable for a variety of operations like drilling, tapping, engraving, and contour machining. A Tilting Rotary Table is an advanced accessory for CNC machines that combines the functionality of rotation (like a 4th Axis Rotary Table) with the ability to tilt at various angles. This versatile tool is essential for machining complex components requiring multi-angle precision and intricate detailing. It is widely used in industries such as aerospace, automotive, medical devices, and precision engineering, where the highest levels of accuracy and efficiency are critical.

Features : Special design for angle setting on various machine tools. Low profile for larger working space. The table is set manually to the required Tilt and is locked in the set position by means of two locking clamps held through bolts. Can be adjusted by 45 degree on both right-hand and left- hand side. The angle marking are accurate and easy to read. Application : Useful accessory for setting work at an angle for milling or other operations. Construction : Cast Iron Stress Relieved Tilting Table. Finish : Hammer tone mid grey.

The  Rotary Casting Machine advances permanent mold casting technology another step and makes it the most profitable approach for the modern foundries today. This high production, completely automated system can meet your needs for large volume applications. We incorporate up to 12 of our standard casting machines (#2H, #3HS, #6H or RT machines) on one rotary table to reduce cycle time in each station to as little as 20 seconds. As an example, based on our 8-station 2H Rotary Table, we have calculated that eight seconds is necessary to index the table between stations without inertial forces affecting feed characteristics of castings. Assuming a three minute (180 second) cooling cycle, this rotary system will theoretically produce 120 cycles per hour. At 83% of theoretical, it would be 100 machine cycles per hour. At 100 hours per week, this calculates out to 10,000 machine cycles per week. If there are two cavities, it will produce 20,000 parts week . This will give a total production of nearly one million parts per year!

Manual Tilt Table having comes with Three Wide Straps to hold the patient.Range of Tilt is Calibrated from 0 to 90 Degree.Table Size : 24" X 78" X 32"The table is fitted with Tubular Frame and Four wheels 4". Features: Easy to operate Easy to carry Fine quality

Electrically operated tilt table with foam padded top, provided with three straps to hold the patient. Heavy duty imported motor provides silent and smooth lifting action with easy to operate remote control switches. Range of electronic tilt table is adjustable between 0 to 85 degrees. The table top is 61cm wide x 198cm long x 80cm high, and is fitted on a heavy duty tubular steel frame with four locking wheels of 10 cm dia. For easy mobility. Oven baked finish. Works on 220v ac.

Tilting Table - Overview Tilting Table is a useful accessory for setting work at an angle for milling or other operations. The table has machined T-slots along length and can swing up to 45° on either side.For setting purposes a degree scale, reading minimum one degree, is graduated on the end face of cylindrical base itself. This ensures better setting accuracy. The table is set manually to the required tilt and is locked in the set position by means of two locking clamps held through bolts. Salient Features Made from close grained plain cast iron conforming to grade FG 220 of IS 210 (equivalent to GG20 / FT20 / 30-A). Higher grades also offered on request. Castings stress relieved to relieve internal stresses. Table top and base are flat and parallel within 0.05 mm per 300 mm. T-slots are parallel to the edge of the table and the cylindrical base within 0.05 mm per 300 mm. Offered in sizes as shown in the table.

Tilt Table Xiangyu XYQ-2 This Tilt Table  is composed of frame, desktop, fixing belt, standing board, bed board and angle adjustment device. When doing standing exercise, the user should lay on the bed board, and be fixed by the bed board, fixing belt and desktop. The bed board can be adjusted by angle adjustment device to change the patient’s pasture from 0° (decubitus) to 90° (stance) gradually, and adjust randomly.

Cervical & Lumbar Traction System versatile and easy to operate traction machine with both static and intermittent treatment modes. The SM12 Traction machine features variable speed control with clear displays of all treatment settings and is available separately or as part of a traction package with table and accessories. Choice of intermittent or static traction modes Variable speed control with quiet operation throughout treatment period Minimum and maximum force settings 2.5-91 kgs (5.5lbs-200lbs) Variable hold and rest times from 0-99 seconds Clear displays of all set treatment perimeters Patient safety switch with adjustable alarm Supplied with spreader bar CE marked and registered-Class 2 A medical device Dimensions W27cm x H27cm x D34cm

Product description: electrically operated tilt table with foam padded top, provided with three straps to hold the patient. Heavy duty imported motor provides silent and smooth lifting action with easy to operate remote control switches. Range of electronic tilt table is adjustable between 0 to 85 degrees. The table top is 61cm wide x 198cm long x 80cm high, and is fitted on a heavy duty tubular steel frame with four locking wheels of 10 cm dia. For easy mobility. Oven baked finish. Works on 220v ac.

We offer tilting tables. tilting table is a useful accessory for setting work at an angle for milling or other operations. The table has machined t-slots along length and can swing up to 45° on either side. For setting purposes a degree scale, reading minimum one degree, is graduated on the end face of cylindrical base itself. This ensures better setting accuracy. The table is set manually to the required tilt and is locked in the set position by means of two locking clamps held through bolts.

Electrically operated tilt table with foam padded top, provided with three straps to hold the patient. Heavy duty imported motor provides silent and smooth lifting action with easy to operate remote control switches. Range of electronic tilt table is adjustable between 0 to 85 degrees. The table top is 61cm wide x 198cm long x 80cm high, and is fitted on a heavy duty tubular steel frame with four locking wheels of 10 cm dia. for easy mobility. Oven baked finish. Works on 220V AC.

ERT series of Rotary Tilting Tables enables accurate and productive machining. These tables are designed so that the surface of the table top is on the center line of the tilting axis, for a greater piece part capacity, easier programming and less interference in the work zone.