Symbiosis Axial Flow Fan

Request for Price

Symbiosis Axial Flow Fans are available in wide range of combination from 12″ to 75″ diameter fitted with Motors from 0.37 kW to 110 kW in 2 Pole, 4 Pole, 6 versions. Motors are suitable for 415 volts ±10%, 50 Hz ±5%, 3 Phase Power Supply, as per IS:325/1996, which are in-house manufactured ensuring better fitment and proper matching. Fans are available in single phase version also. Symbiosis Axial Flow Fans are capable of handling up to 300000 m3/hr air delivery and static pressure up to 120 MM WG.Further pressure can be developed with multiple staging of fans.

Application : Air Cooling
Color : Silver
Voltage : 220V
Frequency : 50Hz, 60Hz
Power : 3-6kw
Driven Type : Electric
Warranty : 2yrs
...more
Get Best Price
Roof Extractor Unit

Request for Price

SYMBIOSIS Roof Extractor Units are available from sizes 19″ to 60″, fitted with Hood and Bottom Plate. These units are used on the roof to extract and exhaust contaminated air.

Shape : Round
Application : Industrial Use
Color : Silver
Voltage : 220V
Automatic Grade : Automatic
Power : 3-6kw
Driven Type : Electric
...more
Get Best Price
Radial Bladed Type Fans

Request for Price

Material : Stainless Steel
Color : Silver
Voltage : 220V
Automatic Grade : Automatic
Power : 1-3kw
Driven Type : Electric
Warranty : 2years
...more
Get Best Price
kitchen ventilation systems

Request for Price

SYMBIOSIS Kitchen Ventilation systems specializes in the treatment of air from kitchens. [1] Kitchen ventilation presents the problems of grease, smoke and odour not usually found in other ventilation systems. SYMBIOSIS Equipments used in Kitchen Ventilation uses an Extractor Hood or Canopy and a Filtering system. The fan for the ventilation system may be located within the kitchen / in the duct system nearby and also if required far away from the kitchen as per site conditions.

Material : Material
Weight : 0-10kg
Operating Pressure : 0-5Bar
Water discharge : 0-10mm
Electrical Devices : En 6 To 1000 Volt
Area Protection : 100x30x9 Ft
...more
Get Best Price
Flame Proof Fan

Request for Price

SYMBIOSIS Flame Proof Axial Fans are available from sizes 15″ to 75″ and are used extensively in Fire Hazard Areas.

Weight : 100-1000kg, 1000-2000kg
Voltage : 220V
Automatic Grade : Automatic
Power : 3-6kw
Driven Type : Electric
...more
Get Best Price
Bifurcated Fan

Request for Price

SYMBIOSIS Bifurcated Fans are available from sizes 19″ to 75″. These fans are used to handle hazardous air, where motors are kept outside the air stream.

Voltage : 220V
Frequency : 50 Hz
Power : 0-25 Kw
Driven Type : Electric
Mounting : Ground Mounted
Surface Finishing : Polished
...more
Get Best Price
belt driven fan

Request for Price

Symbiosis Belt Driven Fans are available from sizes 19″ to 75″. In which, Fans are driven by belt and pulley arrangement and The motor is located outside the air stream.

Voltage : 220V
Automatic Grade : Automatic
Power : 1-3kw
Driven Type : Electric
Warranty : 2years
...more
Get Best Price
Backward Inclined Type Impeller

Request for Price

The Single Thickness backward Inclined Impeller is highly efficent and suitable for it has good Aerodynamic characteristics with maximum design efficiency up to 81%. It can be used in reasonable Dust Laden Air or Gas Environment. Wear plates can be provided to counter abrasion. This fan range is suited for High Volume, Medium Pressure Applications and specially for high temperature requirements. 5 different series for varying wheel designs allow flexibility in selection. This design is suited for harsh process requirements and is easily replaceable/maintainable due to its inherent blade geometry With years of application oriented experience and latest Manufacturing facilities, we manufacture these Impellers within close tolerences matching exact blade profiles using mechanized welding procedures. With welding distortion Management, maintaining minimal impeller run out before dynamic balancing and with special handling of Impeller, SYMBIOSIS delivers world class fans and blowers for your Critical applications.
...more
Get Best Price
backward curved blower

Request for Price

The single Thickness Backward Curved Impeller is highly Efficient and only slightly less Efficient than its Aerofoil Counterpart. It has ideal Aerodynamic characteristics with maximum Design efficiency upto 82.4 %. It can be used for clean air or medium concentrations for medium to high pressure industrial applications. 9 different series for varying wheel designs allow flexibility in selection. This Design is uited for Harsh process requirements and is the most preferred choice for majority of applications. With years of application oriented experience and latest Manufacturing facilities, we manufacture these Impellers within close tolerences matching exact blade profiles using mechanized welding procedures. With welding distortion Management, maintaining minimal impeller run out before dynamic balancing and with special handling of Impeller, SYMBIOSIS delivers world class fans and blowers for your Critical applications Our Blowers are truly SYMBIOTIC to your process. Think of Air…… Think of SYMBIOSIS Blower. We offer the Backward Curved Centrifugal fan in multiple sizes, arrangements, construction classes, impeller and housing widths. Whether standard or custom, each SYMBIOSIS Industrial Fan is designed and built with unmatched quality and backed by responsive service

Color : Brown
Voltage : 220V
Automatic Grade : Automatic
Power : 1-3kw
Driven Type : Electric
Warranty : 2 Years
...more
Get Best Price
Backward Curved Aerofoil impeller fan

Request for Price

This impeller has ideal Aerodynamic characteristics with maximum Design efficiency up to 89%. It can be used for clean air or low dust concentrations for medium to high pressure industrial applications. 4 different series for varying wheel designs allow flexibility in selection. The double-skin airfoil makes the blades sensitive to abrasive dust, and is to be used only for low dust loads. With years of application oriented experience and latest Manufacturing facilities, we manufacture these Impellers within close tolerences matching exact blade profiles using mechanized welding procedures. With welding distortion Management, maintaining minimal impeller run out before dynamic balancing and with special handling of Impeller, SYMBIOSIS delivers world class fans and blowers for your Critical applications. Our Blowers are truly SYMBIOTIC to your process. Think of Air…… Think of SYMBIOSIS Blower. We offer the Airofoil centrifugal fan in multiple sizes, arrangements, construction classes, impeller and housing widths. Whether standard or custom, each SYMBIOSIS Industrial Fan is designed and built with unmatched quali ty and backed by responsive service. AEROFOIL FAN PERFORMANCE & DESIGN Air volumes up to 9,50,000CMH Static pressures up to 1500 mmWC Temperatures up to 550 ℃ High Peak Total Efficiency up to 89% Non-overloading power curve. Single Width, Single Inlet (SWSI) and Double Width, Double Inlet (DWDI). Silent in operation viz z viz other profiles for similar operation. Very high Strength of Impeller for clean gas application viz a viz other profiles for similar operation.

Application : Industrial
Voltage : 220V
Automatic Grade : Automatic
Power : 1-3kw
Driven Type : Electric
Warranty : 2 Years
...more
Get Best Price
Centrifugal Blowers

Request for Price

Get Best Price
Blower Fan

Request for Price

Get Best Price
Air Washer

Request for Price

Get Best Price
Wet Ventilation System

Request for Price

Get Best Price
Axial Flow Fans

Request for Price

Get Best Price
Exhaust Ventilation Systems

Request for Price

Get Best Price
Customized Fabrication

Request for Price

Get Best Price

Services

Textile Mill Fabrication Services

Request for Price

We are a registered Vendor of Major Mega Industrial Corporates in INDIA.We offer customized services for as Per Drawing Fabrication of Systems, Components, Equipments for Industries like
...more
Get Best Price
Sugar Plant Fabrication Services

Request for Price

We are a registered Vendor of Major Mega Industrial Corporates in INDIA.We offer customized services for as Per Drawing Fabrication of Systems, Components, Equipments for Industries like
...more
Get Best Price
Steel Plant Fabrication Services

Request for Price

We are a registered Vendor of Major Mega Industrial Corporates in INDIA.We offer customized services for as Per Drawing Fabrication of Systems, Components, Equipments for Industries like
...more
Get Best Price
Refinery Fabrication Services

Request for Price

We are a registered Vendor of Major Mega Industrial Corporates in INDIA.We offer customized services for as Per Drawing Fabrication of Systems, Components, Equipments for Industries like
...more
Get Best Price
power plant fabrication services

Request for Price

We are a registered Vendor of Major Mega Industrial Corporates in INDIA.We offer customized services for as Per Drawing Fabrication of Systems, Components, Equipments for Industries like
...more
Get Best Price
Petrochemical Plant Fabrication Services

Request for Price

We are a registered Vendor of Major Mega Industrial Corporates in INDIA.We offer customized services for as Per Drawing Fabrication of Systems, Components, Equipments for Industries like
...more
Get Best Price
Landfill & Incineration Fabrication Services

Request for Price

We are a registered Vendor of Major Mega Industrial Corporates in INDIA.We offer customized services for as Per Drawing Fabrication of Systems, Components, Equipments for Industries like
...more
Get Best Price
Fertilizer Plant Fabrication Services

Request for Price

We are a registered Vendor of Major Mega Industrial Corporates in INDIA.We offer customized services for as Per Drawing Fabrication of Systems, Components, Equipments for Industries like
...more
Get Best Price

Be first to Rate

Rate This

Select the service for which you are writing review for this business

How would you rate the business?

What would you like other to know about this business, based on your experience?

Minimum 20 characters!

About the Company

Primary Business Manufacturers
Year of Establishment 1999

Opening Hours

SUN : Closed
MON : 9:30 AM - 6:30 PM
TUE : 9:30 AM - 6:30 PM
WED : 9:30 AM - 6:30 PM
THU : 9:30 AM - 6:30 PM
FRI : 9:30 AM - 6:30 PM
SAT : 9:30 AM - 6:30 PM

USHA DIE CASTING INDUSTRIES is a Surat (INDIA) based Co. incorporated in Year 1999 by TechPreneur Mr. MG VASI, a University Gold Medalist with rich Industrial Experience, who has made UDCI the name to rely on in Air movement Industry. We started our journey from being an Import substitute specialist and by offering premium quality blowers and fans; we have established ourselves as a leading Industrial and centrifugal blower fans manufacturer in India. It has been a journey of achieving the highest level of Product Performance and Service Backup with a superb Customer Rapport and earning their confidence over the years.
With the Flagship Products of our SYMBIOSIS Brand Centrifugal Fans & Blowers / Axial Flow Fans and Air pollution control Equipments (i.e. Fumes Exhaust blower, Ventilation fans & systems), we have carved a niche in the Air Movement sector of Indian Process Industries. As a prominent Industrial Blower manufacturer in India, we assure you to find a suitable SYMBIOSIS Blower fan for any kind of critical plant application from our wide and application specific types of industrial blowers, ventilation fans and systems. OEM customers bet on SYMBIOSIS range of products for delivering exacting systems to customers worldwide.
Application oriented systems in the SYMBIOSIS range are
Air Washer – Install Wet Ventilation Systems, available in both Spray Type as well as Evaporative Cooling Type, at your workstation. These are offered in both Civil Constructed and Modular Fabricated types (Single / Double Skin) in Domestic & Industrial applications.
SYMBIOSIS Smoke Exhaust Blowers & Ventilation Systems are sought after by Industrial & Commercial Kitchens, Paint Shops, Steel / Forging / Foundry Shops, Metal Cutting Systems and a variety of users who seek HSE compliance and Workmen Safety. SYMBIOSIS has the expertise from Concept to Commissioning in all types of fume exhaust system design in India.
With the years of Experience, proven Engineering capabilities, Technical knowhow and Best in class Manufacturing capabilities; Usha Die Casting Industries is a name to be reckoned within the Fabrication industries in Surat today.We are geared to take up our Customised Engineering and Fabrication Jobs to the next level. Having worked with the Indian & International MNC & TNC’s, we accept participation to supply equipments and systems like Storage Tanks / Pressure Vessels / Heat Exchangers / Refinery Reactor components / Steel & Power Plant components & systems & many more such Industrial applications. It is noteworthy that our expert products & services have given us a chance to supply in the government departments as well.