CG Trading Sachin, Surat, Gujarat

Type strainers derive its name from the shape of its configuration that looks like “Y”. It is very useful when it comes to protecting pumps and compressors because the dirt or debris present in the latter is collected in the strainer without bargaining with the pressure drops. The Y type strainers are most suitable for horizontal and vertical pipelines where the debris is difficult to be removed from the liquid or gas. Found in thousands of pipelines, this strainer is the most economic and common for permanent use.

Material : CAST IRON

Pressure : PN10-PN16

  Advance Butterfly Valve are designed & manufactured to have optimum mix of structural stability, flow efficiency & effective seating coupled with advantage of light weight, compact design and ease of operation. Only a quarter turn is needed to fully open or close the valves.

Number Of Flower : WAFER BUTTERFLY VALVE

Brand Name : KARTAR

Material : CAST IRON

Pressure : PN16

Port Size : 50MM - 250

Power : Manual

A three piece ball valve is preferred wherever regular cleaning is required. The valve body is composed of three separate pieces held together by bolts, which can be easily removed for cleaning and servicing. A unique advantage of the three piece valve design is that the ball valve ends can remain threaded into the pipe, while the center section containing the ball can be removed. These three piece ball valves have been specifically designed to be easily disassembled, cleaned, and reassembled. three piece stainless Steel ball valves also called three SS ball valves, are widely used for a variety of sanitary applications that are required for pharmaceutical and food/beverage industries.

Size : 1.1/2inch, 1.1/4inch

Number Of Flower : Flanged End Valve

Material : Carbon Steeel, Cast Iron, Stainless Steel

Application : Gas Fitting, Water Fitting

Technics : Gear Operated, Hard Sealing

Power : Hydraulic, Manual, Solenoid

Pressure : Triple Offset Butterfly Valve

Structure : Double Half Shaft, Pinless, U Section

Feature : Blow-Out-Proof, Casting Approved, Investment Casting

Number Of Way : 2way, 3way

sporlan thermostatic expansion valve is a small brass body, externally adjustable valve with balanced port construction. the sporlan thermostatic expansion valve are available for replacement of types cbi and cbbi valves. these valves contain internal check valves to allow reverse flow on heat pump applications. this eliminates the need for an external check valve piped around the tev for reverse flow. the sporlan thermostatic expansion valve can be used on heat pump and air conditioning (cooling only) applications. this allows you to reduce inventory by using the same valve to replace the i, bi, and bbi valves. the sporlan thermostatic expansion valve can even be used to replace the ri valve (non-rpb versions only).   markets: air conditioning heat pump applications   features and benefits: optional inlet strainer can be applied in bi-directional applications can operate over widely varying operating conditions thermostatic charges available to match system conditions available with internal equalizer or external equalizer odf solder, sae flare, and chatleff connections available   applications: heat pumps air conditioning – residential, commercial capacity ranges from 1 to 6 tons r-22

Number Of Flower : Thermostatic Expansion Valve

SINGLE PIECE DESIGN BALL VALVE SCREWED END Single piece Ball valves are the right ball valve for just about every conceivable application. They are available made from bar stocks sand casted , investment casting in various materials, likes CI, CS, WCB, SS 304,SS 304L ,SS 316 ,SS 316L , IC CF8,IC CF8M,IC CF3. SINGLE PC design are regular exporting valves to Europe, America ,Asia and Gulf Countries .Sizes -1/4″ to 4″(6 NB TO 100 NB).

Material : Stainless Steel

Application : Industrial

Pressure : High Pressure, Low Pressure, Medium Pressure

Temperature Of Media : High Temperature, Low Temperature

Gate valves are available under any Third party inspection including IBR (Indian Boiler Regulation).#150, C.S GATE VALVE FLANGE ENDS, Design-API 600, MOC-WCB,Wedge-A216 Gr.WCB+13% Cr.,Body seat ring-A105+HF,Trim-8,Stem-A 182 Gr. F6a, Packing-Die-moulded Graphite packing with braided end rings, Gasket-SS316+Graphite filler, Handwheel- IS:1865,End Flanges Dimensions- ASME B16.5 RF, Testing- API 598.

Brand Name : CG

Media : Gas, Fuel, Water, Air

Material : Stainless Steel

Pressure : 10kg and 16kg

Temperature Of Media : Low Temperature, Medium Temperature

The two piece ball valve has one body joint which means the body is composed of two pieces, hence the name “two piece”. This 2 piece body allows a larger ball to be installed at the time of manufacture, which makes this a full bore or full port ball valve.Full bore means that the bore hole in the ball has the same inside diameter as that of the piping it is connected to. The advantage is that there is no pressure drop and flow rate is unaffected.They provide a simple on/off flow, as well as the ability to control flow rate by opening and closing to different degrees, this process is called throttling. Quick and easy to install, threaded valves are easy to use and require no tools for installation.

Material : Stainless Steel

Brand Name : Micro

Type miniature compact design needle valves are ideal for bubble tight shut-off in applications where space is at a premium. The mini series are available with metal to metal low torque seating . Available with end connections in sizes 1/8 to 1/2 and as pipe connections.

Material : Stainless Steel

Brand Name : CG

Connection : 3/8" OR 1/2" BSP

Overload-proof through travel-dependent, electronic switching off in end position. With die-cast aluminium housing and yoke for valves with 40 mm stroke. Optional function with one auxiliary switch. With manual control. Additional info SKC..U, SKC..UA are UL listed. Control devices MK..6.. are control devices with safety shut-off function per DIN EN 14597.

Structure : Control

SIEMENS PIBCV VALVE VPI 46 SCREWED END This valve is commonly known as pressure independent balancing control valve and it is a multi-functional valve. Our organization has gained huge acclaim and appreciation in exporting and supplying PIBCV Valve. We source this valve from trusted and reliable vendors of the market. This valve is used as pressure control valve and regulating valve in chemical, petrochemical and pharmaceutical industry. Clients can obtain this PIBCV Valve in different standard sizes as per their exact requirements.

Availability : 1 kg

Diameter (mm) : 40 Mm

Valve Size : 1inch

Voltage Range : 24 V AC

Number Of Flower : HVAC Valve

Brand Name : SIEMENS

Material : Brass

Condition : New

Automatic Grade : Automatic

Total Carbohydrate : 1 Year

Number Of Way : 2way

End Connection : SCREWED END

Electromotoric actuators for valves SAY31P03 Operating voltage AC 230 V, 3-position control signal SAY61P03 Operating voltage AC/DC 24 V, control signal DC 0…10 V,4…20 mA SAY81P03 Operating voltage AC/DC 24 V, 3-position control signal SAY61P03 Position feedback, override control,choice of flow characteristic For direct mounting on valves; no adjustments required Manual adjuster, position indicator and status indication per LED Optional functions with auxiliary switches, function module

Number Of Flower : Linear Actuators

Material : PLASTIC

Certification : CE Certified

Feature : High Strength

Pressure : High Pressure

Phase : Double Phase

Surface Finish : Color Coated

Electric motor-driven actuators for two-position and three-position control as well as DC 0…10 V control 2 Nm nominal torque AC/DC 24 V or AC 230 V rated voltage Pre wired with 0.9 m connecting cable Spring return Auxiliary switch for auxiliary functions

Number Of Flower : Damper Actuator

Pressure : Low Pressure

Power Supply : 220V

Temperature Of Media : Medium Temperature

Normex Ball Foot Valves has received a special status in negative suction pumping applications. Normex Ball foot valve is regarded as the most reliable, 100% leak proof foot valves. & is an only solution for typical priming problem. DESCRIPTION STANDARD MATERIAL ON REQUEST BODY/COVER/STRAINER CAST IRON (GG25) S.G.IRON(DI)/WCB/ST.STEEL BALL NITRILE REINFORCED NEOPRENE/EPDM SEAT RING L T BRONZE ST.STEEL FASTENERS CARBON STEEL ST. STEEL PAINT ENAMEL/EPOXY  PAINT   END CONNECTION FLANGED   Product Enquiry SKU: Normex Ball type foot valve Flange EndCategory: Normex ValveTags: Ball type foot valve, foot valve, Foot Valve flanged end, normex, Normex B-05, Normex Ball type foot valve Flange End  

Size : 1/2"-6"

Brand Name : NORMEX

Material : CAST IRON

Normex Ball Foot Valves has received a special status in negative suction pumping applications. Normex Ball foot valve is regarded as the most reliable, 100% leakproof foot valves. & is an only solution for typical priming problem.   In the application where foot valve is involved, the main concern of the user is letting away of media by the foot valve. This calls for the ‘priming.’ of the the pump which is time consuming & tedious job. If the “on-off frequency” is more, the trouble rises multifolds. A heavily leaking foot valve can also give rise to start up trouble to pump as suction line never gets filled completely. A leaking foot valve can cause not only time wastage but also delay in process industry where water is required at particular instant. In typical case of Fire fighting application, if foot valve leaks, pump is not started can cause damage to property as well as life. Even in application in irrigation / agriculture sector, where electricity is available for limited time & intermittent (in rural India) priming pump every time/any time of day & night is a loss to pumping time.   With Ball foot valve (Threaded or Flange) installed the frequent priming is totally avoided for a very long span months to years. Normex Ball foot valves (along with Ball Check & Butterfly valves) are regularly & exclusively recommended by many consultants for many years. The Plumbing, Fire, HVAC, Irrigation contractors are also convinced by the reliability of these valves all leading to customer satisfaction.   The principal features & comparison of foot valves are similar to Ball Check valves(B-01). Ball foot valve(Flange): Model B-05(N) These flangedfoot valves are available from 50mm to 200mm sizes with 6.0 kg/cm2 working pressure. Ball Foot valve (Flanged) B-05These are the check valves converted to foot valves by installing strainer to the inlet side. They are generally recommended for sizes of 250mm,300mm & 350mm NB.However,smaller sizes from 25mm TO 200mm are available & can withstand pressures of 16/10 kg/cm2 depending on size.   For normal application Model B-05(N) is recommended in the sizes from 50mm to 200mm.

Brand Name : Normex

Normex Ball Type Check Valves (NRV) B-01 was the first of the valve at Normex with unique design and technology for the first time in India. A very simple and robust design with no mechanism involved. The heart ofб═ valve is rubber coated ball. The mechanism hinge-pin-disc used in conventional check valves is eliminated and Normex has put in this rubber coated ball to arrest flow media in return condition.   As the pump starts, the ball moves out totally from the flow path when the pumping is on giving a full bore maximum flow/discharge with minimum head losses. (Fig. A). As the pump stops, the ball rolls back and seats perfectly on the rounded valves seat ensuring totally leak proof sealing.(Fig. B)   Salient Features : Lowest possible pressure drop across the valves. 100% leak proof sealing years over years. Non-clogging and self cleaning as ball rotates during operation. Virtually no wear and tear, no maintenance and longer service life. Higher solid handling capacity due to full bore and straight internal path. Lower head loss-high discharge, reduced pumping time-All leading to Energy Saving.   Applications : Clean water, Raw water, Sewage, Slurry, Waste water, Viscous liquids etc.   Used in industries like: Fire fighting, Plumbing, Water distribution, Water/Sewage treatment, Irrigation/agriculture, Sewage plants, Steel mills, Power stations, Chemical/process industries, HVAC, Sugar/food industry, Breweries, Mining and many more.

Brand Name : Normex

We deals in Stainless Steel Butterfly Valve.Specification: Size: 40mm to 900mm Material: Stainless Steel Temperature: 370 F 

Number Of Flower : WAFER

End Connection : FLANGED END

Valve Size : 2"-12"

Material : Stainless Steel

Media : Water, Gas, Fuel

Brand Name : CG

L&T make three piece design carbon steel ball valve, regular bore, with body and body connectors of carbon steel to ASTM A 216 Gr. WCB, ball and stem of SS 316,  seat  and body connector seals of moulded virgin P.T.F.E., gland  packing of carbon filled P.T.F.E, with Screwed ends to BSPT thread, suitable for maximum working pressure of 69  bar  and conforming to our Catalogue. No. L7R BTC /L3RBTC/L7FBTC

Material : Carbon Steeel

Application : Gas Fitting

Country of Origin : India

Brand Name : L & t

L & T FORGED GATE VALVE L&T Valve Limited (Formerly L&T India Limited) which focuses on the requirements of the power sector. The facility is the only Indian valve plant authorized to offer valves with ASME ‘N’ and ‘NPT’ stamps.L&T forged steel valves, L&t Make Valve General Arrangement Drawing conform to ASME B16.34 and the range comprises Pressure-seal Gate, Globe & Check Valves in ASME classes up to 4500.   Small-bore Forged Steel Valves Dealers / Distributors in India These valves are available in ½” to 2″ in straight pattern and Y-pattern. The straight pattern Gate, Globe & Check Valves are available in ASME classes up to 800 and the Y-pattern range in classes 1500 and 2500. Bellow-sealed and Cryogenic gate and globe valves are also offered.

Material : Cast Steel (Gr. WCB)

Application : Water Fitting

Brand Name : L & T

L & T AQUA SEAL BUTTERFLY VALVE IBFLPC / 2IWNGSL aquaseal Integrally-moulded Butterfly Valve,L&t Make Safety Relief Valve is available in various sizes from in PN 10 pressure rating.The valve was developed to provide reliable sealing in water and air lines, and is today the industry benchmark.The most striking feature of Aquaseal Butterfly Valve is its integrally-moulded body liner. Aquaseal’s elastomer body seat is vulcanised insitu onto the body using high temperature and pressure, and this provides longer life and superior performance when compared to valves with loose liners. check our Audco L&t Valve Online Buyer & Seller, L&t Make Valve Original Valves in india   Aquaseal requires no maintenance, and is truly a fit-and-forget valve.   Salient Features: Longer Life Tight Sealing, and Consistent Low Torque Assured Shaft Sealing Lower Resistance to Flow – Disc design Ease of Installation One-piece blowout-proof Shaft Reliable Drive

Material : Cast Iron, Cast Steel (Gr. WCB)

Number Of Way : 2way, 3way, 4way

Brand Name : L & T

L & T SINGLE PIC BALL VALVE FLANGE END L1RF1C L&T Valves manufactures a wide range of soft-seated Process Ball Valves, L&t Make Fire Safe Valve.The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.The valves are available in sizes up to 12 inches and ASME classes up to 600.The valves are available in three-piece, two-piece and single-piece construction, in full-bore and reduced bore in a variety of materials.   Salient Features: Mirror-finished solid ball. Fine-grained PTFE seats. Fire-safe. Cavity Pressure Relief mechanism. Blowout-proof stem. Leak-tight stem sealing. Antistatic feature.

Material : Cast Steel (Gr. WCB), Stainless Steel 316 (CF8M)

Application : Water Fitting

Pressure : High Pressure, Low Pressure, Medium Pressure

Feature : Casting Approved, Easy Maintenance., Smooth Finish And Robust Design

Automation Grade : Manual

Number Of Way : 2way, 3way, 4way

Boiler Blow Down Valves are available with Rack & Pinion arrangement for easy and quick operation. Satellited trims are provided for all above 600# as a manufacturing standard of valves and in lower rating also on request. Deep stuffing box is providing to assure tightness and maximum packing life.   Boiler Blow Down Valves available under any Third party inspection including IBR (Indian Boiler Regulation) in size range from 25mm to 100mm up 900# pressure rating.

Brand Name : Floster

Hvac ball valve, hvac butterfly valve, hvac balancing valve, hvac control valve, hvac thermowell, hvac motorized valve, hvav y strainer, hvac port strainer.

Usage : Industrial

Finishing : Color Coated

Material : Cast Steel

The V4 Actuated Butterfly Valves are suitable for heating and cooling applications.cThe V4 series is equipped with standard On-Off control quarter-turn electric actuator. The V4 series can also provide feedback output signal:Dry contact for On-Off version

H7080B series duct mounting humidity and temperature sensors are designed for environmental monitoring and control applications in industrial, commercial and general building. These sensors can be used for discharge, or return air control. 4~20mA/ 0~10VDC or resistance output for temperature 4~20mA/ 0~10VDC output for humidity Duct mounted Excellent linearity Good long term stability High reliability Wide sensing range Easy installation

Number Of Flower : Humidity Sensors

Material : Plastic

Application : Industrial Use

Condition : New

Total Carbohydrate : 1year

Brand Name : HONEYWELL

Accuracy : 1%

Output : 4-20mA