Chamfering Machine Dealers

  Automatic chamfering equipment for tubing up to 20” O.D. Simple or double spindle versions Chamfering suitable for burr removal (eg produced by friction saw) or to produce bevel compliant to API specifications.

The High Tensile Steel Tube is now widely applied in the global automotive market. In order to achieve higher fuel efficiency and lowering materials costs, thicker tubes and solid bars have been replaced by thin wall High Tensile tubes, which offer lower weight without compromising in strength and safety. With a much higher tensile strength (80~120 Kg/cm²) than conventional steels (40~50 Kg/cm²), this material is highly employed in key areas of cars in for structural (chassis) applications and impact protection. The new SOCO SA-78NCE tube cutting line brings you the latest technology in High Tensile Steel Tube Sawing. Its unique design and cutting system brings the highest saw blade life in such applications, as well as unparalleled performance and speed. Machine Features: Especially suitable for Cutting Automotive parts such as Impact Beams, Chassis and Cross Bar tubing High Tensile Tube Cutting (up to 120 kg/cm²) TCT Saw Blades was recommend to use High Speed Sawing: the average sawing cycle times can be up to 4.5 seconds for most sizes. Standard with 6.5 meters Bundle Loading Magazine ( MB6 ), optional 8.5 meters ( MB8 ) and 12.5 meters ( MB12 ) Automatic separation of first and last cut vs. working pieces First and crop cuts down to 25mm Quick Saw Blade Change system Safety covers for operational safety and minimizing noise levels. 1 or 2 optional length stoppers with Digital Length Readout. NC Length Stopper is available in optional. 2 Loading Positions available: Left Side and Right Side Loading Magazines Capacity up to OD76mm tubing. Sawing Lengths up to 2 / 3 / 4.5 meters Electric Servo Controlled Feeding and Cutting i2® Touch Screen Graphical Controls with Automatic Recommendation of Cutting Parameters. 3 ~ 5 minutes setup time between most tube sizes Unique Blade Holders and Gearbox Brake System for complete backlash elimination May connected to SOCO’s Tube Deburring Machine ( BDB-70 ) or Tube Chamfering Machine ( FM-76V ), Length Measuring ( LM-3000 ) and Stacking ( STK-3000 )

This machine chamfers the bore on connecting rod’s small end. The client used to do this machining operation on an VMC, which was a time consuming process. In order to reduce the time and deliver an output of 4 component every 20 seconds, we proposed a pendulum type loading unloading concept. Basic features and sequence of operation is given below: FEATURES & SPECS: Rigid, stress relieved and fabricated structural. Atop the base, two fixtures are mounted side by side along the length. Each fixture has hydraulic clamping and can hold 4 components at a time. Adjacent to these fixtures, a servo driven longitudinal slide is mounted with approximate slide stroke of 600mm. Atop this slide a chamfering head with servo driven vertical movement is mounted. The chamfering head will be mounted with a chamfer tool. The chamfering head, at start of each cycle, will be positioned at the center, in between the fixtures. The machine will be provided with a recirculating coolant system. The machine will be provided with complete machine enclosure. LM guides will be used for slideways. Machine will be provided with centralized lubrication system for sliding surfaces. Machine will be provided with touch panel HMI, for easy parameter setting of feed and positions. SEQUENCE OF OPERATION: Load the component onto one of the fixture and press auto-cycle. The components at 1st fixture get clamped. The longitudinal slide moves the unit head top the 1st component of the 1st fixtures and vertical head plunges the chamfer head into the component to chamfer. The chamfer head then retracts and moves to the next component and repeats the above steps for the rest of the component. While chamfering is going on at the 1st fixture, the operator has to load components onto 2nd Now after chamfering components at 1st fixture, the chamfer head returns home and stops inbetween two fixtures. The operator has to press-autocycle. Steps 2 to 5 is now repeated at 2nd fixture, while the operator unloads chamfered component and loads new component at 1st

Grind master offers Gear Tooth Chamfering and Deburring Machine in Technical Collaboration with SAMPUTENSILI, Italy. Model SCT3 is a universal machine which can be used for a wide range of spur and helical gears, shaft type gears, bevel gears and pinions etc. It has Chamfering and Deburring heads that use patented tooling from SAMP so as to produce symmetrical & consistent chamfering results on the gear tooth. SAMP patented deburring tools are spring loaded to compensate for face width variation. The machines are offered with optional shuttle feed loader or gantry robotic automation systems.

    End facing machine suitable for end chamfering of ferrous & non ferrous tubes such as Mild steel, Carbon steel, Stainless steel, Brass, Copper tubes etc.   Custom made design to suit requirements of water and gas tubes to Oil country tubes   Emphasis on : Material selection     Manufacturing & process selection     Dimensional & geometrical accuracy   Single heads on both sides with 2 to 4 tool-tips to obtain desired chamfering angles   Size range : from 12.5 mm to 150mm NB pipes and equivalent range for tube to other standardss   Provided with walking beam tube transfer device if required   Can accommodate any length from 3 meters to 8 meters

Our manufactured Chamfering Machine is engineered using the high grade of raw materials and components with the help of our state of the art infrastructure and our technically skilled staff. We not only manufacture but also supply them to our valued patrons in a timely manner and at the most competitive market price.