Vacuum power can be set to different levels to achieve 1mL/S to 15mL/ S aspiration speed
Sensitive level sensor to prevent liquid overflow during operation
Fully autoclavable waste collection bottle, tubing and handle
Lid, tubing and handle are easy for disassembling, cleaning and autoclaving
Wide range of adapters to fit tube, microplate and disk plate for various tasks
Interchangeable hand operator -tip adapters make it suitable for various tasks from single channel to 8-channel based on the applications in tube, micro plate, disk plate etc.
Vacuum power can be set to different levels to achieve 1mL/S to 15mL/ S aspiration speed
Sensitive level sensor to prevent liquid overflow during operation
Fully autoclavable waste collection bottle, tubing and handle
Lid, tubing and handle are easy for disassembling, cleaning and autoclaving
Wide range of adapters to fit tube, microplate and disk plate for various tasks
Interchangeable hand operator -tip adapters make it suitable for various tasks from single channel to 8-channel based on the applications in tube, micro plate, disk plate etc.
Single chip microcomputer technology + 4.3-inch TFT capacitive touch screen control (optional choice- 7 inches), other optional functions such as computer communication or data printing.
High degree of intelligence, centralized control of the central computer, ultrasonic time, power can be set from 1%-100%.
Sample temperature detection display, frequency microcomputer automatic tracking, fault automatic alarm.
With overload protection function and if the horn not immersed in the liquid will automatically protect the luffing rod from damage.
Can realize fault, over temperature or operation error caused by voice alarm function, more humanized.
Features :
Full intensity control: Intensity is controlled from 1-100% giving a greater degree of resolution and ability to
pinpoint the amplitude needed to effectively process sample.
Programmable LCD - 10 nos. of program can be set and stored
System with microprocessor based programmable controller
Programmability: Parameters like total time, Pulse on Time, Pulse Off Time can be adjusted.
Pulse mode: Adjustable Pulse On and Off time mode to reduce the heat rise in the temperature sensitive samples.
Controls ON and OFF Cycles independently from 1 to 99 second
Process Continuously 1 to 999 minutes (16 Hrs.)
Temperature monitoring: Integrated temperature control to prevent overheating of the sample.
Power Requirements: 220/230V AC 50Hz, 110/120V AC 50-60Hz*
In built Protection Circuit: Overload Protection ✓ Power Protection,
High Temp. Protection, High Voltage Protection
Tuning Auto Tune / Manual Tuning
Probe Material Titanium Alloy TI-6AL-4V
Variable Amplitude % Variable Amplitude & Power Control 0-25-50-75-100 %.
Sealed Converter Piezoelectric lead zirconate titanate crystals (PZT)
Energy Converter.
Temperature Indicator ° C Indicates sample temperature 0 to 150° C
Temperature Controller ° C Indicates Temp.& automatically m/c off when it crosses desired value
Single chip microcomputer technology + 4.3-inch TFT capacitive touch screen control (optional choice- 7 inches), other optional functions such as computer communication or data printing.
High degree of intelligence, centralized control of the central computer, ultrasonic time, power can be set from 1%-100%.
Sample temperature detection display, frequency microcomputer automatic tracking, fault automatic alarm.
With overload protection function and if the horn not immersed in the liquid will automatically protect the luffing rod from damage.
Can realize fault, over temperature or operation error caused by voice alarm function, more humanized.
Features :
Full intensity control: Intensity is controlled from 1-100% giving a greater degree of resolution and ability to
pinpoint the amplitude needed to effectively process sample.
Programmable LCD - 10 nos. of program can be set and stored
System with microprocessor based programmable controller
Programmability: Parameters like total time, Pulse on Time, Pulse Off Time can be adjusted.
Pulse mode: Adjustable Pulse On and Off time mode to reduce the heat rise in the temperature sensitive samples.
Controls ON and OFF Cycles independently from 1 to 99 second
Process Continuously 1 to 999 minutes (16 Hrs.)
Temperature monitoring: Integrated temperature control to prevent overheating of the sample.
Power Requirements: 220/230V AC 50Hz, 110/120V AC 50-60Hz*
In built Protection Circuit: Overload Protection ✓ Power Protection,
High Temp. Protection, High Voltage Protection
Tuning Auto Tune / Manual Tuning
Probe Material Titanium Alloy TI-6AL-4V
Variable Amplitude % Variable Amplitude & Power Control 0-25-50-75-100 %.
Sealed Converter Piezoelectric lead zirconate titanate crystals (PZT)
Energy Converter.
Temperature Indicator ° C Indicates sample temperature 0 to 150° C
Temperature Controller ° C Indicates Temp.& automatically m/c off when it crosses desired value
Temperature MonitoringIntegrated Temperature Control to Prevent Overheating of the Sample
In built Protection CircuitOverload Protection ✓ Power Protection
Brand NameDual Life
Applications:
Ultrasonic Homogenizers are recommended for homogenization and lysis of laboratory samples that do not require traditional grinding or rotor-stator.
It offer precision engineering with all the necessary features to create a total system for ultrasonic disruption.
A Sonicator system comprises of 3 main components: generator, convertor and horn (probe).
The generator transforms AC line power to high frequency electrical energy.
The generator features a keypad or buttons which allows the user to control the Sonication parameters.
The generator provides high voltage pulses of energy at a frequency of 20 KHz that drives a piezoelectric convertor.
The convertor is a cylindrical device which is connected to the generator by a high voltage cable.
The convertor transforms electrical energy to mechanical vibrations.
The vibration is amplified and transmitted down the length of the probe/horn.
Features:
Full intensity control: Intensity is controlled from 1-100% giving a greater degree of resolution and ability to pinpoint the amplitude needed to effectively process sample.
Programmable LCD - 10 nos. of program can be set and stored
System with microprocessor based programmable controller
Programmability: Parameters like total time, Pulse on Time, Pulse Off Time can be adjusted.
Pulse mode: Adjustable Pulse On and Off time mode to reduce the heat rise in the temperature sensitive samples.
Controls ON and OFF Cycles independently from 1 to 99 second
Process Continuously 1 to 999 minutes (16 Hrs.)
Temperature monitoring: Integrated temperature control to prevent overheating of the sample.
Power Requirements: 220/230V AC 50Hz, 110/120V AC 50-60Hz*
In built Protection Circuit: Overload Protection ✓ Power Protection,
High Temp. Protection, High Voltage Protection
Tuning Auto Tune / Manual Tuning
Probe Material Titanium Alloy TI-6AL-4V
Variable Amplitude % Variable Amplitude & Power Control 0-25-50-75-100 %.
Sealed Converter Piezoelectric lead zirconate titanate crystals (PZT)
Energy Converter.
Temperature Indicator ° C Indicates sample temperature 0 to 150° C
Temperature Controller ° C Indicates Temp.& automatically m/c off when it crosses desired value
Standard Accessories of with Probe Sonicator
Ultrasonic Generator,
Ultrasonic Cable
PT 100 Sensor
Sealed Convertor,
Probe (1 Standard Probe) & Wrench Set.
OPTIONAL ACCESSORIES:
Sound Enclosure, Support Stand, Laboratory Jack, Foot Switch
Applications:
Ultrasonic Homogenizers are recommended for homogenization and lysis of laboratory samples that do not require traditional grinding or rotor-stator.
It offer precision engineering with all the necessary features to create a total system for ultrasonic disruption.
A Sonicator system comprises of 3 main components: generator, convertor and horn (probe).
The generator transforms AC line power to high frequency electrical energy.
The generator features a keypad or buttons which allows the user to control the Sonication parameters.
The generator provides high voltage pulses of energy at a frequency of 20 KHz that drives a piezoelectric convertor.
The convertor is a cylindrical device which is connected to the generator by a high voltage cable.
The convertor transforms electrical energy to mechanical vibrations.
The vibration is amplified and transmitted down the length of the probe/horn.
Features:
Full intensity control: Intensity is controlled from 1-100% giving a greater degree of resolution and ability to pinpoint the amplitude needed to effectively process sample.
Programmable LCD - 10 nos. of program can be set and stored
System with microprocessor based programmable controller
Programmability: Parameters like total time, Pulse on Time, Pulse Off Time can be adjusted.
Pulse mode: Adjustable Pulse On and Off time mode to reduce the heat rise in the temperature sensitive samples.
Controls ON and OFF Cycles independently from 1 to 99 second
Process Continuously 1 to 999 minutes (16 Hrs.)
Temperature monitoring: Integrated temperature control to prevent overheating of the sample.
Power Requirements: 220/230V AC 50Hz, 110/120V AC 50-60Hz*
In built Protection Circuit: Overload Protection ✓ Power Protection,
High Temp. Protection, High Voltage Protection
Tuning Auto Tune / Manual Tuning
Probe Material Titanium Alloy TI-6AL-4V
Variable Amplitude % Variable Amplitude & Power Control 0-25-50-75-100 %.
Sealed Converter Piezoelectric lead zirconate titanate crystals (PZT)
Energy Converter.
Temperature Indicator ° C Indicates sample temperature 0 to 150° C
Temperature Controller ° C Indicates Temp.& automatically m/c off when it crosses desired value
Standard Accessories of with Probe Sonicator
Ultrasonic Generator,
Ultrasonic Cable
PT 100 Sensor
Sealed Convertor,
Probe (1 Standard Probe) & Wrench Set.
OPTIONAL ACCESSORIES:
Sound Enclosure, Support Stand, Laboratory Jack, Foot Switch
Capacity25 Ml, 50 Ml, 100 Ml, 250 Ml, 500 Ml or 1000 Ml
Speed40 to 150 RPM
Double walled chamber, inner made of Stainless steel and outer fabricated out of S.S. / cold rolled mild steel sheets duly finished in attractive powder coat paint.
Pyramidal lid is also made of stainless steel / Acrylic prevents falling of condensed water droplets on the specimens.
The inter space between the two walls is tightly packed with special grade glass wool in order to prevent thermal losses.
Immersion type heater achieves heating.
Digital temperature controller controls the temperature with an immersion type heater achieves heating.
The bath is provided with an oscillating tray riding on ball rollers oscillated through a PMDC gear variable speed motor.
The shaking tray can either hold test tubes or Erlenmeyer flasks of capacity 25 ml, 50 ml, 100 ml, 250 ml, 500 ml or 1000 ml as
ordered by the users.
Designed to work on 220/230 volts a/c.
Temp accuracy ±1ºC controlled by PID digital.
Supplied complete with one shaking tray, cord and plug, S.S. Pyramid lid with supplied 1 tray but without flask.
Golden Parameters
Water Bath Chamber Dimensions, Capacity and Construction:
Water bath Chamber Capacity: 2 to 4 liters
Chamber Construction: Double wall rectangular chamber with mineral wool/solid insulation material filling in between
Material of Outer Chamber Construction: Epoxy coated/ Powder coated mild steel
Number of racks provided with Water bath unit: 0
Number of 75 mm diameter Holes provided: 0
Double walled chamber, inner made of Stainless steel and outer fabricated out of S.S. / cold rolled mild steel sheets duly finished in attractive powder coat paint.
Pyramidal lid is also made of stainless steel / Acrylic prevents falling of condensed water droplets on the specimens.
The inter space between the two walls is tightly packed with special grade glass wool in order to prevent thermal losses.
Immersion type heater achieves heating.
Digital temperature controller controls the temperature with an immersion type heater achieves heating.
The bath is provided with an oscillating tray riding on ball rollers oscillated through a PMDC gear variable speed motor.
The shaking tray can either hold test tubes or Erlenmeyer flasks of capacity 25 ml, 50 ml, 100 ml, 250 ml, 500 ml or 1000 ml as
ordered by the users.
Designed to work on 220/230 volts a/c.
Temp accuracy ±1ºC controlled by PID digital.
Supplied complete with one shaking tray, cord and plug, S.S. Pyramid lid with supplied 1 tray but without flask.
Golden Parameters
Water Bath Chamber Dimensions, Capacity and Construction:
Water bath Chamber Capacity: 2 to 4 liters
Chamber Construction: Double wall rectangular chamber with mineral wool/solid insulation material filling in between
Material of Outer Chamber Construction: Epoxy coated/ Powder coated mild steel
Number of racks provided with Water bath unit: 0
Number of 75 mm diameter Holes provided: 0
Details:
Double walled thermostatically controlled inside made of stainless-steel outer made of S.S. / M.S. duly powder coated.
Gap between the walls is filled with glass wool.
Temp range 5 C above room temp to 80ºC with an accuracy ±2ºC.
Working on 220-volt 50 Hz A.C. supply.
Details:
Double walled thermostatically controlled inside made of stainless-steel outer made of S.S. / M.S. duly powder coated.
Gap between the walls is filled with glass wool.
Temp range 5 C above room temp to 80ºC with an accuracy ±2ºC.
Working on 220-volt 50 Hz A.C. supply.
Features :
Recipe database: 99 datas can be stored
Automatic internal calibration
Tare/counting/percentage test/animal weighing
Baud rate is adjustable/ Density function
unit conversion (g/mg/ct/oz)...
Multi-Language : English/ German/French/Italian/
Spanish/Portuguese
Keep weight values in GLP/ISO format,Includes date,
time, and serial number
Plastic protection cover for keypad
Sensitivity/speed adjustable
Overload alarm/fault alarm/level indicator
Optional accessories :
ION-A15 Static Eliminator
Balance plate system. USB version or Bluetooth version
DPP-250-BT Bluetooth printer for system
TLP-50 serial printer with date/time
DPP-250 serial printer
STAT serial printer with statistical function
Alphanumeric external keyboard
Serial to USB converter
Serial cable for serial output to printer or computer
Factory calibration certificate
Features :
Recipe database: 99 datas can be stored
Automatic internal calibration
Tare/counting/percentage test/animal weighing
Baud rate is adjustable/ Density function
unit conversion (g/mg/ct/oz)...
Multi-Language : English/ German/French/Italian/
Spanish/Portuguese
Keep weight values in GLP/ISO format,Includes date,
time, and serial number
Plastic protection cover for keypad
Sensitivity/speed adjustable
Overload alarm/fault alarm/level indicator
Optional accessories :
ION-A15 Static Eliminator
Balance plate system. USB version or Bluetooth version
DPP-250-BT Bluetooth printer for system
TLP-50 serial printer with date/time
DPP-250 serial printer
STAT serial printer with statistical function
Alphanumeric external keyboard
Serial to USB converter
Serial cable for serial output to printer or computer
Factory calibration certificate
The machine adopts Variable frequency drive motor,
microcomputer control, LCD & Digital display, with .
The automatic rotor recognition to prevent from overspeed.
There are 40 levels of acceleration and deceleration, and it can store 12 users programs.
It is easy to replace the rotor with a special elastic fixed method.
Automatic fault diagnosis, Adopted Imported compressor, CFCfree
refrigerants, double circuit control for refrigeration and
heating.
Programs of RCF can be set up directly.
We Adopts Import famous variable frequency controller, which
can control speed accurately and have a long service life.
The operating parameters can be modified during operation.
All- steel body, three-layer steel for safety.
The machine adopts Variable frequency drive motor,
microcomputer control, LCD & Digital display, with .
The automatic rotor recognition to prevent from overspeed.
There are 40 levels of acceleration and deceleration, and it can store 12 users programs.
It is easy to replace the rotor with a special elastic fixed method.
Automatic fault diagnosis, Adopted Imported compressor, CFCfree
refrigerants, double circuit control for refrigeration and
heating.
Programs of RCF can be set up directly.
We Adopts Import famous variable frequency controller, which
can control speed accurately and have a long service life.
The operating parameters can be modified during operation.
All- steel body, three-layer steel for safety.
Features:
Portable autoclave sterilizers are designed for general purpose sterilization jobs at dental clinics, nursing homes and hospitals etc.
Available from 5 to 25 liters of capacities, in addition, we also offer customized portable autoclaves at highly competitive price.
Designed ergonomically, our portable autoclaves feature long years of worry-free performance, maximum efficiency and safe operation.
Being compact in design, these systems occupy very low bench space; hence, perfect for places where space is a major issue.
They are also simple to use, operator needs to special training prior using.
No installation is needed, all you need plug and use.
Each unit constructed with heavy gauge aluminum or stainless-steel material (optional).
The chamber generates steam pressure 15 psi to 18psi under working temperature 121°C to 140°C.
Each system is tested on certain parameters of successful sterilization ensuring safe operation always.
These portable autoclaves are equipped with safety devices that protect operator and samples from over-pressure, over current and other mishandling conditions.
Autoclave vertical type with complete stainless steel, electrically with air release nozzle.
Portable design for low bench space
Fast sterilization approx. 20 min
Over pressure protection Heat resistant handles
ISI marked gasket and heating element
With gasket, lid, safety valve, pressure gauge & steam release cock.
Working Temperature 121°C – 140°C
Operating Pressure 15 PSI / 18 PSI
Sterilization Time 1 to 99 Minutes
Construction 304 Grade Stainless Steel / Aluminum
Safety - CE Marked Pressure Valves, Lid Locks, Steam & vacuum release valve
Heating Electric Heating, Optional Non-electric (Gas)
Certification CE Marked
Power AC 220V / 50Hz
Full range including Stainless Steel Wire Basket
Features:
Portable autoclave sterilizers are designed for general purpose sterilization jobs at dental clinics, nursing homes and hospitals etc.
Available from 5 to 25 liters of capacities, in addition, we also offer customized portable autoclaves at highly competitive price.
Designed ergonomically, our portable autoclaves feature long years of worry-free performance, maximum efficiency and safe operation.
Being compact in design, these systems occupy very low bench space; hence, perfect for places where space is a major issue.
They are also simple to use, operator needs to special training prior using.
No installation is needed, all you need plug and use.
Each unit constructed with heavy gauge aluminum or stainless-steel material (optional).
The chamber generates steam pressure 15 psi to 18psi under working temperature 121°C to 140°C.
Each system is tested on certain parameters of successful sterilization ensuring safe operation always.
These portable autoclaves are equipped with safety devices that protect operator and samples from over-pressure, over current and other mishandling conditions.
Autoclave vertical type with complete stainless steel, electrically with air release nozzle.
Portable design for low bench space
Fast sterilization approx. 20 min
Over pressure protection Heat resistant handles
ISI marked gasket and heating element
With gasket, lid, safety valve, pressure gauge & steam release cock.
Working Temperature 121°C – 140°C
Operating Pressure 15 PSI / 18 PSI
Sterilization Time 1 to 99 Minutes
Construction 304 Grade Stainless Steel / Aluminum
Safety - CE Marked Pressure Valves, Lid Locks, Steam & vacuum release valve
Heating Electric Heating, Optional Non-electric (Gas)
Certification CE Marked
Power AC 220V / 50Hz
Full range including Stainless Steel Wire Basket
Double walled construction with inner chamber made of stainless-steel SS and outer chamber made of mild steel duly powder coated.
Solid see thru double walled door and a full view inner plexi-glass door enables
inspection and monitoring of inner chamber specimens without disturbing the process temperature.
Keyed door lock for improved security with magnetic door gasket.
User – oriented design of shelves makes you adjust each space of shelves without difficulty.
PUF thick insulation to ensure temperature stability & reduced energy
consumption
Microprocessor based PID temperature & humidity indicator cum control
Specially designed controller for audio visual deviation alarm from the preset
temperature, door open alarm.
The cooling is effected by a hermetically sealed CFC FREE ECO FRIENDLY COMPRESSOR.
Designed air flow system ensuring uniform temperature & humidity distribution
SS water reservoir with immersion type heaters at the bottom provides 40% to
95% humidity
Illumination with the help of fluorescent lamps/tubes accounts for artificial daylight conditions
5 levels light control (0%, 25%, 50%, 75% and 100%)
PT-100 temperature sensor (resolution 0.1°C)
Capacitive type humidity sensors
It works on 230V AC.
Unit mounted on castor wheels for ease of mobility
Double walled construction with inner chamber made of stainless-steel SS and outer chamber made of mild steel duly powder coated.
Solid see thru double walled door and a full view inner plexi-glass door enables
inspection and monitoring of inner chamber specimens without disturbing the process temperature.
Keyed door lock for improved security with magnetic door gasket.
User – oriented design of shelves makes you adjust each space of shelves without difficulty.
PUF thick insulation to ensure temperature stability & reduced energy
consumption
Microprocessor based PID temperature & humidity indicator cum control
Specially designed controller for audio visual deviation alarm from the preset
temperature, door open alarm.
The cooling is effected by a hermetically sealed CFC FREE ECO FRIENDLY COMPRESSOR.
Designed air flow system ensuring uniform temperature & humidity distribution
SS water reservoir with immersion type heaters at the bottom provides 40% to
95% humidity
Illumination with the help of fluorescent lamps/tubes accounts for artificial daylight conditions
5 levels light control (0%, 25%, 50%, 75% and 100%)
PT-100 temperature sensor (resolution 0.1°C)
Capacitive type humidity sensors
It works on 230V AC.
Unit mounted on castor wheels for ease of mobility
Battery Service LifeMore than 8 Hours of Intermittence Use
Charging Time2-3 Hours
Pipette TypesGlass or Plastic Pipette (0.1-100mL), Pasteur Pipettes
Filter0.45μm Hydrophobic
Weight200g
Compatible with most of the plastic and glass pipettes from 0.1 -100mL
Six speeds of selection for aspiration and dispensing different liquids
Large LCD display showing low battery warning and speed settings
Enables single-handed operation with minimum effort
Light and ergonomic design providing easy usability
High capacity Li-ion battery enable long runtime of operation
Powerful pump fills a 25mL pipette in<5 seconds
0.45μm replaceable hydrophobic filter
Rechargeable during use
Compatible with most of the plastic and glass pipettes from 0.1 -100mL
Six speeds of selection for aspiration and dispensing different liquids
Large LCD display showing low battery warning and speed settings
Enables single-handed operation with minimum effort
Light and ergonomic design providing easy usability
High capacity Li-ion battery enable long runtime of operation
Powerful pump fills a 25mL pipette in<5 seconds
0.45μm replaceable hydrophobic filter
Rechargeable during use
Temperature Range5 to 60 degree c (resolution 0.1c)
Temp ControllerBy Microprocessor Based PID Digital Temperature Indicator cum Controller
Shaking Amplitude25 mm
RPM DisplayDigital
Shaking SpeedVariable speed from 20 RPM to 250 RPM±±
Temp. DisplayLED Display for Set Value(SV) and Process Value (PV)
RelaySolid stale electronic relay with protective heat sink
Air CirculationBy forced convection system
InsulationBy High density PUF insulation
OperationsNearly silent operation with ultra-low vibration
High Voltage ProtectionThrough automatic voltage stabilizer (Optional)
Electric Supply220/230V AC ; 50/6OHz
Details:
These shakers are ideal for mixing and development of culture, chemical, solvent and various other application.
The orbital shaker is assembled ion heavy duty mild steel angle and sheet section.
The drive has Single Excentre and 3 Pin.
Doubled wall inner S.S. outer mild steel temperature range 5 ºC above ambient to 60 ºC accuracy ± 0.5 ºC controlled by preset dual display electronic digital temp. Controller indicator.
Double walled chamber, inner made of polished stainless-steel sheets and outer made of cold rolled mild steel sheets with powder coat finish.
The wall is insulated with special grade glass wool.
The inner chamber accommodates one no. easily removable Stainless-Steel tray at adjustable height and is also provided with a shaking platform with threaded holes for mounting stainless steel clamps for holding conical flasks from 50 ml to 1000 ml capacity.
An outer double door with inner full view acrylic door permits inspection of specimens.
Heating is by imported nichrome wires.
Temperature is controlled by a Digital Indicator cum controller working in conjunction with PT 100 sensor.
Powerful air circulator creates positive airflow through the incubator.
Temperature range to 5ºC to 60 ºC ± 0.5 ºC controlled by preset dual display electronic digital temp. Controller indicator.
The shaker is driven by a variable DC Motor with variable speed control.
The speed is indicated RPM Indicator for digital display of speed with preset facility.
The control panel accommodating, digital controller, pilot indicating lamps, on/off switches, digital RPM Indicator, etc., will be provided at the top of the unit.
RPM range: 50 to 200 Rpm orbital (25cm) variable speed controlled by digital display RPM controller cum indicator (permanent Magnet DC Motor) complete with stainless steel tray lotus shaped spring action clamps but without conical flask.
Applications:
Dual Life brings the ultra-high-tech Triple walled Microprocessor controlled, solid-state Orbital Shaking Incubator down to earth
Specially designed for Orbital Shaking under controlled Incubations ( Temperature required for Tissue Cultures Fermentation Studies, & Ageing Tests., Life science applications & growth studies
Features & Construction
Robust construction outer chamber is made of Mild Steel duly pre treated & finished with powder coated paint for lasting finish.
Inner chamber made of STAINLESS STEEL SHEET (304 Grade).
Fitted with durable coaxial blower for forced air circulation at triple walled back to maintain temperature uniformity in the chamber
Outer front double walled door is insulated and is fitted with magnetic tape for airtight closing for no temperature loss, provided with lock and key arrangement.
Fitted with Universal Platform to accommodate interchangeable clamps of assorted sizes for different capacity of flasks.
Stationery shelves made of Stainless Steel (SS-3G4) for use of the unit as a standard B.O.D. Incubator can be supplied at extra cost.
Door operated illumination lamp is fitted inside the chamber for easy visibility.
A full view inner plexi glass door enables inspection and monitoring of inner chamber specimens without disturbing the process temperature.
High grade PUF INSULATION between outer and inner chamber for minimal thermal losses.
Cooling is done by finned tube evaporator lie in the air circulation path by JSI marked Compressor/Condensing Units CFG free & R-134 a eco friendly refrigerant.
Heating elements are placed in the path of moving air duly insulated from the body.
Control panel having all controls and circuitry are housed at the top fitted with Temperature controller cum Indicator Microprocessor based with LED display for Set Value (SV) & Process Value (PV) to select any desired temperature provided with Volt meter on the panel to read the incoming voltage.
Caster wheel mounted for easy portability,
Supplied with cord and plug.
Operating Voltage: 220 Volts AC (50 Hz).
Optional Features:
LCD Controller with Data Logger : (16 x 2) with optional RS-485 communication ports, cables window based software with inbuilt data recording.
Communication Port : Communication Port with interface and data cable to download data to your PC.
Timer : With reverse 0 - 24 hours for regulating hours of light and darkness including, fitting at the top of incubator.
Shaking Frequency Range : 50 to 300rpm.
Shaking Motion : By Permanent Magnet DC Drive for continuous operations.
Lotus Clamp Holders : Made of Stainless Steel (SS-304) (One set supplied as per user configuration)
Flask Configurations Available (any one set supplied with the unit): 100ml x 49, 150ml x 49, 250ml x 33, 500ml x 24, 1000ml x 15, 2000 ml x 9
Chamber sterilization : By U.V. germicidal tube.
Interior Illumination : By fluorescent tubes of for photosynthetic applications
Regulated Voltage : By Voltage Stabilizer Automatic
Details:
These shakers are ideal for mixing and development of culture, chemical, solvent and various other application.
The orbital shaker is assembled ion heavy duty mild steel angle and sheet section.
The drive has Single Excentre and 3 Pin.
Doubled wall inner S.S. outer mild steel temperature range 5 ºC above ambient to 60 ºC accuracy ± 0.5 ºC controlled by preset dual display electronic digital temp. Controller indicator.
Double walled chamber, inner made of polished stainless-steel sheets and outer made of cold rolled mild steel sheets with powder coat finish.
The wall is insulated with special grade glass wool.
The inner chamber accommodates one no. easily removable Stainless-Steel tray at adjustable height and is also provided with a shaking platform with threaded holes for mounting stainless steel clamps for holding conical flasks from 50 ml to 1000 ml capacity.
An outer double door with inner full view acrylic door permits inspection of specimens.
Heating is by imported nichrome wires.
Temperature is controlled by a Digital Indicator cum controller working in conjunction with PT 100 sensor.
Powerful air circulator creates positive airflow through the incubator.
Temperature range to 5ºC to 60 ºC ± 0.5 ºC controlled by preset dual display electronic digital temp. Controller indicator.
The shaker is driven by a variable DC Motor with variable speed control.
The speed is indicated RPM Indicator for digital display of speed with preset facility.
The control panel accommodating, digital controller, pilot indicating lamps, on/off switches, digital RPM Indicator, etc., will be provided at the top of the unit.
RPM range: 50 to 200 Rpm orbital (25cm) variable speed controlled by digital display RPM controller cum indicator (permanent Magnet DC Motor) complete with stainless steel tray lotus shaped spring action clamps but without conical flask.
Applications:
Dual Life brings the ultra-high-tech Triple walled Microprocessor controlled, solid-state Orbital Shaking Incubator down to earth
Specially designed for Orbital Shaking under controlled Incubations ( Temperature required for Tissue Cultures Fermentation Studies, & Ageing Tests., Life science applications & growth studies
Features & Construction
Robust construction outer chamber is made of Mild Steel duly pre treated & finished with powder coated paint for lasting finish.
Inner chamber made of STAINLESS STEEL SHEET (304 Grade).
Fitted with durable coaxial blower for forced air circulation at triple walled back to maintain temperature uniformity in the chamber
Outer front double walled door is insulated and is fitted with magnetic tape for airtight closing for no temperature loss, provided with lock and key arrangement.
Fitted with Universal Platform to accommodate interchangeable clamps of assorted sizes for different capacity of flasks.
Stationery shelves made of Stainless Steel (SS-3G4) for use of the unit as a standard B.O.D. Incubator can be supplied at extra cost.
Door operated illumination lamp is fitted inside the chamber for easy visibility.
A full view inner plexi glass door enables inspection and monitoring of inner chamber specimens without disturbing the process temperature.
High grade PUF INSULATION between outer and inner chamber for minimal thermal losses.
Cooling is done by finned tube evaporator lie in the air circulation path by JSI marked Compressor/Condensing Units CFG free & R-134 a eco friendly refrigerant.
Heating elements are placed in the path of moving air duly insulated from the body.
Control panel having all controls and circuitry are housed at the top fitted with Temperature controller cum Indicator Microprocessor based with LED display for Set Value (SV) & Process Value (PV) to select any desired temperature provided with Volt meter on the panel to read the incoming voltage.
Caster wheel mounted for easy portability,
Supplied with cord and plug.
Operating Voltage: 220 Volts AC (50 Hz).
Optional Features:
LCD Controller with Data Logger : (16 x 2) with optional RS-485 communication ports, cables window based software with inbuilt data recording.
Communication Port : Communication Port with interface and data cable to download data to your PC.
Timer : With reverse 0 - 24 hours for regulating hours of light and darkness including, fitting at the top of incubator.
Shaking Frequency Range : 50 to 300rpm.
Shaking Motion : By Permanent Magnet DC Drive for continuous operations.
Lotus Clamp Holders : Made of Stainless Steel (SS-304) (One set supplied as per user configuration)
Flask Configurations Available (any one set supplied with the unit): 100ml x 49, 150ml x 49, 250ml x 33, 500ml x 24, 1000ml x 15, 2000 ml x 9
Chamber sterilization : By U.V. germicidal tube.
Interior Illumination : By fluorescent tubes of for photosynthetic applications
Regulated Voltage : By Voltage Stabilizer Automatic
Made of Mild Steel duly powder coated.
Granite Working Platform.
High Speed Centrifugal Blowers,
Front Sash with counter weights.
Fluorescent illumination lights.
Water tap and PP sink.
Provision for gas and air Connection Storage cup board.
15/5 Amp Switches and Socket.
Dual Life Working Area Size 90x60x60 cm.
Dual Life Working Area Size 120x60x60 cm.
Dual Life Working Area Size 120x75x75 cm.
Dual Life Working Area Size 150x75x75 cm.
Fume Hood (Wooden)
Features
Made of Ply-Board frame with melamine lamination from outside and epoxy painted from inside.
Granite Working Platform.
High Speed Centrifugal Blowers,
Front Sash with counter weights.
Fluorescent illumination lights.
Water tap and PP sink.
Provision for gas and air Connection Storage cup board,
15/5 Amp Switches and Socket
Dual Life Working Area Size 90x60x60 cm.
Dual Life Working Area Size 120x60x60 cm.
Dual Life Working Area Size 120x75x75 cm.
Made of Mild Steel duly powder coated.
Granite Working Platform.
High Speed Centrifugal Blowers,
Front Sash with counter weights.
Fluorescent illumination lights.
Water tap and PP sink.
Provision for gas and air Connection Storage cup board.
15/5 Amp Switches and Socket.
Dual Life Working Area Size 90x60x60 cm.
Dual Life Working Area Size 120x60x60 cm.
Dual Life Working Area Size 120x75x75 cm.
Dual Life Working Area Size 150x75x75 cm.
Fume Hood (Wooden)
Features
Made of Ply-Board frame with melamine lamination from outside and epoxy painted from inside.
Granite Working Platform.
High Speed Centrifugal Blowers,
Front Sash with counter weights.
Fluorescent illumination lights.
Water tap and PP sink.
Provision for gas and air Connection Storage cup board,
15/5 Amp Switches and Socket
Dual Life Working Area Size 90x60x60 cm.
Dual Life Working Area Size 120x60x60 cm.
Dual Life Working Area Size 120x75x75 cm.
Filter default configuration405, 450, 492, 630 nm with provision of add up to 12 filter
Filter Updateup to 10 filters
Reading PositionCentral Reading
Reading Range0-4.000abs
Linear Range0-3.000Abs
Resolution0.001Abs
Accuracy±0.01 Abs
Stability≤±0.003 Abs
Repeatability≤0.3%
Incubation TemperatureAt Ambient temperature
Plate Vibration3 kinds of linear vibration, Adjustable to 0-255 seconds
Display Size8 Inches Color Lcd Touch Screen
Power InputDc12v 5a
Power consumption in watt60 VA
SIZE (LxWxH, mm)444x320x318
Maximum Reading time/PlateSingle wavelength:<6S
Modular Design and emendable large enzyme immunoassay system
Automatic access plate and bracket suitable for manipulator grasping
Full closed design of optical path system and long-term maintenance free
Automatic switch door, sampling test,
No manual opening
Centre Location accurate data, good stability and good repeatability
Availability of external Laser printer: Yes
In built Keyboard operation
Memory Storage capacity for test results as per space of computer.
Endpoint method, kinetic method,
inhibition rate, single/dual wavelength measurement
Memory Storage capacity for test
results with patient ID in Professional
Software which can store 200 groups,
1,00,000 sample results, >10 type of curve fitting equation
Visualization of panel and data
Number of samples at a time: 1-96
Maximum Reading time/Plate, Single
wavelength:<6S
Center location, accurate data, good stability and good repeatability
Modular Design and emendable large enzyme immunoassay system
Automatic access plate and bracket suitable for manipulator grasping
Full closed design of optical path system and long-term maintenance free
Automatic switch door, sampling test,
No manual opening
Centre Location accurate data, good stability and good repeatability
Availability of external Laser printer: Yes
In built Keyboard operation
Memory Storage capacity for test results as per space of computer.
Endpoint method, kinetic method,
inhibition rate, single/dual wavelength measurement
Memory Storage capacity for test
results with patient ID in Professional
Software which can store 200 groups,
1,00,000 sample results, >10 type of curve fitting equation
Visualization of panel and data
Number of samples at a time: 1-96
Maximum Reading time/Plate, Single
wavelength:<6S
Center location, accurate data, good stability and good repeatability
Plate OpeningAutomatic Switch door, sampling test, no manual opening
LampDC12V 22W Tungsten halogen lamp
Optical path8 channel vertical light path system
Wavelength Range in Nm400-1000 Nm
Filter Default Configuration405, 450, 492, 630 nm with provision of add up to 12 filter
Filter Updateup to 12 filters, replace them outside
Reading PositionCentral reading
Reading range0-4.000Abs
Linear Range0-3.000Abs
Accuracy±0.01 Abs
Stability≤±0.003 Abs
Repeatability≤0.3%
Incubation TemperatureAt Ambient temperature
Plate Vibration3 kinds of linear vibration, Adjustable to 0-255 seconds
Display SizeExternal PC Attachment
SoftwareProfessional software, can store 200 groups program, 10,0000 sample results, >10 kinds of curve fitt
Power inputAC100-240W 50/60Hz
Power consumption in watt60 VA
SIZE (LxWxH, mm)444x320x190
Maximum Reading time/PlateSingle wavelength:<6S
Modular Design and emendable large enzyme immunoassay system
Automatic access plate and bracket suitable for manipulator grasping
Full closed design of optical path system and long-term maintenance free
Automatic switch door, sampling test, No manual opening
Centre Location accurate data, good stability and good repeatability
Number of samples at a time: 40-96
Availability of external Laser printer: Yes
Keyboard operation
Memory Storage capacity for test results as per space of computer
Modular Design and emendable large enzyme immunoassay system
Automatic access plate and bracket suitable for manipulator grasping
Full closed design of optical path system and long-term maintenance free
Automatic switch door, sampling test, No manual opening
Centre Location accurate data, good stability and good repeatability
Number of samples at a time: 40-96
Availability of external Laser printer: Yes
Keyboard operation
Memory Storage capacity for test results as per space of computer
Permissible Ambient Temperature And5-40 degree c, 80%rh.
It is widely used in chemical synthesis, physical and chemical analysis, bio-pharmaceuticals etc.
The stainless-steel top housing series of magnetic stirrers are most compact.
PMDC motor gives higher torque even at lower speeds and maintains speed stability despite viscosity or volume changes.
Stirring is accomplished by a small Teflon coated magnetic paddle to be placed in the container.
Accurate stepless speed control allows smooth variation upto to 1200rpm.
With Hot Plate is also available.
Features
A wide speed range of 0 to 1500rpm
A wide variety of accessories are available
Aluminum alloy work plate with flat plane provides fast heating performance
Strong compatibility with various heating containers and heating blocks.
Aluminum cover with ceramic work plate, allows for immediate heat transfer
Brushless DC motor is maintenance free and explosion-proof, enables more stirring power
Built-in PID controller ensures safe heating of the medium with overheating protection
Digital temperature control
External temperature control is possible by connecting the temperature sensor (PT1000) with an accuracy at ±0.2°C
Glass ceramic work plate provides excellent chemical resistant performance and most efficient heat transfer
High-resolution LCD display shows actual temperatures and speed
Independent heating and stirring control
Max. heating temperature is 120°C, 340℃, 380°C or 550°C
Remote control function through RS232 interface provides PC control and data transmission.
Safety circuits provide overheating protection
Stainless steel work plate with ceramic coating provides good chemical-resistant performance
Stainless steel work plate, covered with silicone cushion, provides the excellent performance of heating uniformity and skid
resistance
The “HOT” warning will flash if the plate temperature is above 50°C even when the hotplate is turned off
Three heating modes for selected (fast heating, standard heating and stable heating).
Two rotating knobs enable easy adjustment of speed and temperature
Wide range timer function from 1min to 99 h 59 min
It is widely used in chemical synthesis, physical and chemical analysis, bio-pharmaceuticals etc.
The stainless-steel top housing series of magnetic stirrers are most compact.
PMDC motor gives higher torque even at lower speeds and maintains speed stability despite viscosity or volume changes.
Stirring is accomplished by a small Teflon coated magnetic paddle to be placed in the container.
Accurate stepless speed control allows smooth variation upto to 1200rpm.
With Hot Plate is also available.
Features
A wide speed range of 0 to 1500rpm
A wide variety of accessories are available
Aluminum alloy work plate with flat plane provides fast heating performance
Strong compatibility with various heating containers and heating blocks.
Aluminum cover with ceramic work plate, allows for immediate heat transfer
Brushless DC motor is maintenance free and explosion-proof, enables more stirring power
Built-in PID controller ensures safe heating of the medium with overheating protection
Digital temperature control
External temperature control is possible by connecting the temperature sensor (PT1000) with an accuracy at ±0.2°C
Glass ceramic work plate provides excellent chemical resistant performance and most efficient heat transfer
High-resolution LCD display shows actual temperatures and speed
Independent heating and stirring control
Max. heating temperature is 120°C, 340℃, 380°C or 550°C
Remote control function through RS232 interface provides PC control and data transmission.
Safety circuits provide overheating protection
Stainless steel work plate with ceramic coating provides good chemical-resistant performance
Stainless steel work plate, covered with silicone cushion, provides the excellent performance of heating uniformity and skid
resistance
The “HOT” warning will flash if the plate temperature is above 50°C even when the hotplate is turned off
Three heating modes for selected (fast heating, standard heating and stable heating).
Two rotating knobs enable easy adjustment of speed and temperature
Wide range timer function from 1min to 99 h 59 min
Double walled chamber, inner made of stainless-steel sheets and outer made of
heavy duty/cold rolled mild steel sheets duly finished in powder coating.
Inter space in between the walls is tightly packed with special grade glass wool.
Inner chamber accommodates perforated stainless-steel trays at adjustable
heights.
Insulated double walled door in the front is provided with locking arrangements.
Heating is by Nichrome wire heaters evenly distributed on the three sides.
Temperature is indicated and controlled by precision thermostat within the
operating range.
Built in control panel accommodating all electrical/electronic accessories is
provided at the side of the chamber
Temperature Range. Ambient + 5 °C to 250 °C
Temperature Accuracy: ± 2 °C.
Stainless Steel Body
Double walled chamber, inner made of stainless-steel sheets and outer made of
heavy duty/cold rolled mild steel sheets duly finished in powder coating.
Inter space in between the walls is tightly packed with special grade glass wool.
Inner chamber accommodates perforated stainless-steel trays at adjustable
heights.
Insulated double walled door in the front is provided with locking arrangements.
Heating is by Nichrome wire heaters evenly distributed on the three sides.
Temperature is indicated and controlled by precision thermostat within the
operating range.
Built in control panel accommodating all electrical/electronic accessories is
provided at the side of the chamber
Temperature Range. Ambient + 5 °C to 250 °C
Temperature Accuracy: ± 2 °C.
Stainless Steel Body
Material : Stainless Steel
Feature : Energy Saving Certified, Rust Resistance
Ownership TypeCorporation/Limited Liability Company
GSTIN Number24AAGCD6504R1ZB
Opening Hours
SUN : Closed
MON : 9:30 AM - 6:30 PM
TUE : 9:30 AM - 6:30 PM
WED : 9:30 AM - 6:30 PM
THU : 9:30 AM - 6:30 PM
FRI : 9:30 AM - 6:30 PM
SAT : 9:30 AM - 6:30 PM
We, DUAL LIFE SCIENCE PVT LTD, introduce ourselves as Manufacturer, Exporter and Supplier of scientific laboratory equipment. The Company headquarter is in surat (Gujarat), India. The Company is founded by highly Experienced Personnel in the field of LIFE Science. Since our inception, we are supplying a wide range of Fine Quality Lab consumables and Equipments. These personalized and customized products cater to the requirement for various fields. We emphasize quality and timely delivery and always strive to meet the requirements of our potential customers. We’re always coming up with new ideas to assist our industry flourish. We maintain adequate profitability while implementing a variety of cost-cutting measures based on current technology and industry standards.
Reviews & Ratings
Write a Review
Post Free Ad
