Unworked penetration at 25 Deg C +/- 0.5deg C, 0.1mm units220-250
Worked penetration at 25 Deg C +/- 0.5deg, 0.1 mm unit, After 60 strokes220-250
Drop Point, Deg C, Min.105
Description &Application : These are lime based multipurpose grease. MPSP possesses excellent water resistant, anti rust & anti corrosive properties. They are recommended for general application in plain & anti friction bearing where temperatures are moderate. This grease acts as protective layer on exposed parts. This grease is recommended for general chassis lubrication including suspension & steering system. It is also suitable for certain open & semi enclosed gears as well as chain drives of farm equipments.
Description &Application : These are lime based multipurpose grease. MPSP possesses excellent water resistant, anti rust & anti corrosive properties. They are recommended for general application in plain & anti friction bearing where temperatures are moderate. This grease acts as protective layer on exposed parts. This grease is recommended for general chassis lubrication including suspension & steering system. It is also suitable for certain open & semi enclosed gears as well as chain drives of farm equipments.
Unworked penetration at 25 Deg C +/- 0.5deg C, 0.1mm units220-250 Shall not differ from worked by more then 10units
Worked penetration at 25 Deg C +/- 0.5deg, 0.1 mm unit, After 60 strokes220-250
Drop Point, Deg C, Min.190°C
Free alkalinity, as LiOH % wt, Max.0.2
Free organic acidity, as OLEIC acid, %wt. Max.0.3
Heat stability, @ 100 ° C for 30 hrs, % wt oil separated, Max5
Corrosion copper strip, @ 100°C for 24 hrsNegative
Wheel bearing test--
Leakage by mass, max.5
Deposit in the wheel bearingraces or the rollersFree from Deposit
Evidence of abnormal changes in the consistencyor structure of the materialNo
Indication of dry running of racesNo
Resistance to water washout,at 80 °C, % loss by mass, max.15
Roll stability test penetrationchange, Unit after 16 hrs. Max.25
Description & Application :
These are lithium soap multipurpose greases. They have excellent water resistance properties, high oxidation stability, and maximum structural stability with superior anit-rust & anti-corrosion properties. These greases resist water washout & enjoy all round acceptance for both anti-friction & plain bearing lubrication. Multipurpose greases 2 & 3 meet the requirements of British Timken ALG 1/57, IS: 7623-1993 (second revision), IPSS:1-09-006 specification & U.,S. Steel 374 requirements. These greases are widely used in steel plants, heavy engineering units, textile mills, petrochemical & chemical units, etc. These greases are recommended for all class of service in automotive lubrication & bearings.
Description & Application :
These are lithium soap multipurpose greases. They have excellent water resistance properties, high oxidation stability, and maximum structural stability with superior anit-rust & anti-corrosion properties. These greases resist water washout & enjoy all round acceptance for both anti-friction & plain bearing lubrication. Multipurpose greases 2 & 3 meet the requirements of British Timken ALG 1/57, IS: 7623-1993 (second revision), IPSS:1-09-006 specification & U.,S. Steel 374 requirements. These greases are widely used in steel plants, heavy engineering units, textile mills, petrochemical & chemical units, etc. These greases are recommended for all class of service in automotive lubrication & bearings.
Unworked penetration at 25 Deg C +/- 0.5deg C, 0.1mm units265-295 Shall notdiffer from worked by more then 10units
Worked penetration at 25 Deg C +/- 0.5deg, 0.1 mm unit, After 60 strokes265-295
Drop Point, Deg C, Min.190°C
Free alkalinity, as LiOH % wt, Max.0.2
Free organic acidity, as OLEIC acid, %wt. Max.0.3
Heat stability, @ 100 ° C for 30 hrs, % wt oil separated, Max5
Corrosion copper strip, @ 100°C for 24 hrsNegative
Wheel bearing test--
Leakage by mass, max.5
Deposit in the wheel bearingraces or the rollersFree from Deposit
Evidence of abnormal changes in the consistencyor structure of the materialNo
Indication of dry running of racesNo
Resistance to water washout,at 80 °C, % loss by mass, max.15
Roll stability test penetrationchange, Unit after 16 hrs. Max.25
Description & Application :
These are lithium soap multipurpose greases. They have excellent water resistance properties, high oxidation stability, and maximum structural stability with superior anit-rust & anti-corrosion properties. These greases resist water washout & enjoy all round acceptance for both anti-friction & plain bearing lubrication. Multipurpose greases 2 & 3 meet the requirements of British Timken ALG 1/57, IS: 7623-1993 (second revision), IPSS:1-09-006 specification & U.,S. Steel 374 requirements. These greases are widely used in steel plants, heavy engineering units, textile mills, petrochemical & chemical units, etc. These greases are recommended for all class of service in automotive lubrication & bearings.
Description & Application :
These are lithium soap multipurpose greases. They have excellent water resistance properties, high oxidation stability, and maximum structural stability with superior anit-rust & anti-corrosion properties. These greases resist water washout & enjoy all round acceptance for both anti-friction & plain bearing lubrication. Multipurpose greases 2 & 3 meet the requirements of British Timken ALG 1/57, IS: 7623-1993 (second revision), IPSS:1-09-006 specification & U.,S. Steel 374 requirements. These greases are widely used in steel plants, heavy engineering units, textile mills, petrochemical & chemical units, etc. These greases are recommended for all class of service in automotive lubrication & bearings.
The only effective link between your foot on the brake Pedal and the brake assembly at each wheel.
The Composition of " K-INT" Hydraulic Brake-Fluid DOT-4 is Chemically balanced and engineered to obtain optimum performance and to provide maximum safety. It exceeds the performance requirements of FMVSS No. 116 DOT 4 Specifications and IS-8654 TYPE-II.
The only effective link between your foot on the brake Pedal and the brake assembly at each wheel.
The Composition of " K-INT" Hydraulic Brake-Fluid DOT-4 is Chemically balanced and engineered to obtain optimum performance and to provide maximum safety. It exceeds the performance requirements of FMVSS No. 116 DOT 4 Specifications and IS-8654 TYPE-II.
The only effective link between your foot on the brake Pedal and the brake assembly at each wheel.
The Composition of " K-INT" Hydraulic Brake-Fluid DOT-3 is Chemically balanced and engineered to obtain optimum performance and to provide maximum safety. It exceeds the performance requirements of SAE JI703 and the United Stated FMVSS No. 116 DOT-3 specifications and IS-8654 TYPE-I.
The only effective link between your foot on the brake Pedal and the brake assembly at each wheel.
The Composition of " K-INT" Hydraulic Brake-Fluid DOT-3 is Chemically balanced and engineered to obtain optimum performance and to provide maximum safety. It exceeds the performance requirements of SAE JI703 and the United Stated FMVSS No. 116 DOT-3 specifications and IS-8654 TYPE-I.
Description & Application :
Moly Grease : Moly is multipurpose lithium based grease, Compounded with finely dispersed Molybdenum disulphide which is very effective solid lubricant with extremely good anti scuffing characteristics. It provides protection to moving parts under very sever shock load conditions, resists water washouts & gives long service life. Moly grease is recommended for chassis fittings, wheel bearings, greases lubricated universal joints in passenger cars, trucks, buses, farm tractors, mobile construction as well as earth moving machinery. It meets IS:12203:1993.
High Temperature moly Grease : HT Moly is a non soap based smooth structured greases having excellent ability to withstand high temperature & severe shock load conditions. This grease has excellent resistance to water washout & do not get effected by mild acids & alkalis. HT molt' contains Molybdenum disulphide & therefore, has high load bearing abil ity. They have good oxidation resistance &thermal stability for use in both plain & anti friction bearings. It can lubricate satisfactorily at temperature upto 230 °C and will not melt or soften at higherternperature.HT molt' meets U.S. steel 372 requirements, IS:12790 - 1989 grade 3 & IPSS :1-09-008.
Description & Application :
Moly Grease : Moly is multipurpose lithium based grease, Compounded with finely dispersed Molybdenum disulphide which is very effective solid lubricant with extremely good anti scuffing characteristics. It provides protection to moving parts under very sever shock load conditions, resists water washouts & gives long service life. Moly grease is recommended for chassis fittings, wheel bearings, greases lubricated universal joints in passenger cars, trucks, buses, farm tractors, mobile construction as well as earth moving machinery. It meets IS:12203:1993.
High Temperature moly Grease : HT Moly is a non soap based smooth structured greases having excellent ability to withstand high temperature & severe shock load conditions. This grease has excellent resistance to water washout & do not get effected by mild acids & alkalis. HT molt' contains Molybdenum disulphide & therefore, has high load bearing abil ity. They have good oxidation resistance &thermal stability for use in both plain & anti friction bearings. It can lubricate satisfactorily at temperature upto 230 °C and will not melt or soften at higherternperature.HT molt' meets U.S. steel 372 requirements, IS:12790 - 1989 grade 3 & IPSS :1-09-008.
worked penetration at 25 Deg C After 60 strokes, 0.1 mm units265-295
Drop Point, Deg C, Min.190 Dec C
corrosion Copper strip, @100deg C for 24 hours.Negative
Wheel Bearing Test----------
Leakage by mass, max.5
Deposit in the wheel bearingraces or the rollersFree from Deposit
Evidence of abnormal changes in the consistencyor structure of the materialNo
Indication of dry running of racesNo
Resistance to water washout,at 80 °C, % loss by mass, max.15
heat stability, % loss by mass, max5
Roll stability test penetration change, Unit after 16 hrs. Max.25
Four ball wear load kg, Min.300
Four ball wear scar diameter mm, Max.0.6
Description & Application : These greases are lithium base greases having extreme pressure (EP) properties. These greases posses excellent shear stability, high load carrying capacity, high oxidation stability & anti rust / anti corrosion properties. These greases prevent welding & seizure of moving parts often caused by shock loading & resist water washout. EP greases meet IPSS:1-09-005 specification are recommended for both plain & anti friction bearings in a wide variety of applications such as automotive, earth moving equipments, gear couplings, electric motors, mining equipments, & general industrial machinery. It meets IS: 7623-1993 (Second Revision)
Description & Application : These greases are lithium base greases having extreme pressure (EP) properties. These greases posses excellent shear stability, high load carrying capacity, high oxidation stability & anti rust / anti corrosion properties. These greases prevent welding & seizure of moving parts often caused by shock loading & resist water washout. EP greases meet IPSS:1-09-005 specification are recommended for both plain & anti friction bearings in a wide variety of applications such as automotive, earth moving equipments, gear couplings, electric motors, mining equipments, & general industrial machinery. It meets IS: 7623-1993 (Second Revision)
Worked Penetration At 25 Deg C After 60 Strokes, 0.1 Mm Units310-340
Drop Point, Deg C, Min.185 Deg C
corrosion Copper strip, @100deg C for 24 hours.Negative
Wheel Bearing Test----
Leakage by mass, max.5
Deposit in the wheel bearingraces or the rollersFree from Deposit
Evidence of abnormal changes in the consistencyor structure of the materialNo
Indication of dry running of racesNo
Resistance to water washout,at 80 °C, % loss by mass, max.15
heat stability, % loss by mass, max5
Roll stability test penetration change, Unit after 16 hrs. Max.25
Four ball wear load kg, Min.300
Four ball wear scar diameter mm, Max.0.6
Description & Application : These greases are lithium base greases having extreme pressure (EP) properties. These greases posses excellent shear stability, high load carrying capacity, high oxidation stability & anti rust / anti corrosion properties. These greases prevent welding & seizure of moving parts often caused by shock loading & resist water washout. EP greases meet IPSS:1-09-005 specification are recommended for both plain & anti friction bearings in a wide variety of applications such as automotive, earth moving equipments, gear couplings, electric motors, mining equipments, & general industrial machinery. It meets IS: 7623-1993 (Second Revision)
Description & Application : These greases are lithium base greases having extreme pressure (EP) properties. These greases posses excellent shear stability, high load carrying capacity, high oxidation stability & anti rust / anti corrosion properties. These greases prevent welding & seizure of moving parts often caused by shock loading & resist water washout. EP greases meet IPSS:1-09-005 specification are recommended for both plain & anti friction bearings in a wide variety of applications such as automotive, earth moving equipments, gear couplings, electric motors, mining equipments, & general industrial machinery. It meets IS: 7623-1993 (Second Revision)
Reviews & Ratings
Write a Review
Post Free Ad
