NAVPAD SALES Katargam, Surat, Gujarat

Silica fume is a byproduct of producing silicon metal or ferrosilicon alloys. One of the most beneficial uses for silica fume is in concrete. Because of its chemical and physical properties, it is a very reactive pozzolan. Concrete containing silica fume can have very high strength and can be very durable.

Grade : Commercial Grade,Industrial Grade,CONSTRUCTION GRADE

Purity : 99%

Packaging Type : HDPE Bag,Jambo Bags

Country of Origin : India

SiO2 content : 85%

A cover block is basically a spacer that is used to lift the rebar matrix off the ground so that concrete may flow below the rebar. In order to prevent corrosion of the rebar, it has to be totally sheathed in concrete. It usually needs about 2 to 3 inches of coverage on all sides. So the cover block lifts the rebar up by about 2 to 3 inches and becomes a permanent and integral part of the poured concrete, make certain that no part of the rebar sags and minimizes that required concrete coverage throughout the pour.

Size : 190x190cm

Number Of Flower : Cover Blocks

Material : Concrete

Shape : Round

Pattern : Plain

Finishing : Non Polished

As reinforcing material, plaster mesh is used for building internal and external decoration, especially in plastering work. It protects the plaster layer surface from cracking and increases the mechanical strength of the plaster layer. Meanwhile plastering mesh provides a better grip with plaster wall and forms the skeleton layers of the wall plaster and putty, thereby significantly strengthening the plaster layer and significantly extending its service life. Due to its strength and durability, plaster mesh is also successfully used as reinforcing material in strengthening the foundations of buildings, restoration and reinforcement of existing plaster, brickwork, installation of thermal insulation and roofing tile ties, and road laying pavement construction.

Number Of Flower : Fiberglass Mesh,glass fiber plaster mesh ( chicken mesh )

Material : Fiberglass,glass fiber

Storage Condition : Plain,

Availability : 300 TO 1100 GRAMS

Feature : Skin Friendly,Smooth Texture

Technics : NON WOVEN

Country of Origin : India

GSM : 50-100gsm,120, 145 GSM

Knitted Type : Wrap Knitted

Mesh Size : 2.5 X 2.5, 5 X 5

Width : 100MM, 150MM, 200MM, 250MM 300MM & 1000MM

REINFORCE PLASTER MESH ( CHICKN MESH ) As reinforcing material, plaster mesh is used for building internal and external decoration, especially in plastering work. It protects the plaster layer surface from cracking and increases the mechanical strength of the plaster layer. Meanwhile plastering mesh provides a better grip with plaster wall and forms the skeleton layers of the wall plaster and putty, thereby significantly strengthening the plaster layer and significantly extending its service life. Due to its strength and durability, plaster mesh is also successfully used as reinforcing material in strengthening the foundations of buildings, restoration and reinforcement of existing plaster, brickwork, installation of thermal insulation and roofing tile ties, and road laying pavement construction.

Number Of Flower : Glass Fiber Plaster Mesh ( Chicken Mesh )

Material : Glass Fibre

Thickness : 14 Micron

Length : 50 Meter.

Application : Construction,ALL CONSTRUCTION

Grade : BS

Feature : Excellent Strength,Good Quality,High Griping,Optimum Finish,Rust Resistance,Weather Resistance

Finishing : ALKALI RESISTANT COATING

cetification : Iso Certified

Country of Origin : India

ISO9001 : ISO9001

Technics : Glass Fiber Plaster Mesh ( Chicken Mesh )

Weave Style : MESH

Wire Diameter : 0.1-1mm

Wire Gauge : 1-10mm

Pozzocrete 60 is a high efficiency pozzolanic material, obtained by selection and processing of power station fly ashes resulting from the combustion of pulverised bituminous coal. Pozzocrete 60 is subjected to strict quality control. Pozzocrete (P40, P60 and P100)a processed quality assured fly ash, investigated for its use as a partial replacement for cement in cement mortar (1:3). The utilization of Pozzocrete (P40, P60 and P100) as cement replacement material in mortar or as additive in cement introduces many benefits from economical, technical and environmental points of view. This paper presents the results of the cement mortar of mix proportion 1:3 in which cement is partially replaced with Pozzocrete (P40, P60 and P100) as 0%, 10%, 30%and 50% by weight of cement. Four set of mixture proportions were made. First were control mix (without Pozzocrete (P40, P60 and P100) with regional fine aggregate (sand)) and the other mixes contained Pozzocrete (P40, P60 and P100) obtained from DIRK India Private Limited, nashik, Maharashtra state. The compressive strength has been obtained with partial replacement of Pozzocrete (P40, P60 and P100) with cement. Test results indicate the decreases in the strength properties of mortar with Pozzocrete (P40, P60 and P100) for strength at 28 days as partial replacement with the cement in the cement mortar 1:3. So it can be used in non-structural elements with the low range compressive strength where strength is not required and low cost temporary structure is prepared.

Number Of Flower : Pozzolanic Powder

Application : ALL CONSTRUCTION

Feature : Durable,Fine Finished,Good Quality,Good Strength,Long Life,Low Miantenance

Condition : Good,New

Packaging Type : Bag

Country of Origin : India

Packaging Size : 30KG & jambo bags

The Pozzocrete Fly Ash range is an artificial pozzolan, specially designed to achieve optimum performance on most cement and concrete applications. In the production of Pozzocrete 40™, 60™, 63™, and 83™ high quality PFA were selected and industrially processed in order to obtain maximum performance as a cement replacement product.The POZZOCRETE brand is reserved only for those grades which meet the Indian Standard 3812 , the European Standard EN450 Category S and the American Standard ASTM 618. Other by-products are called P... (with the related Grade number). The process used to produce Pozzocrete Fly Ash significantly reduces the amount of unburned particles leading to a virtually carbon free material. Optimum reactivity is obtained by rejecting the less reactive crystalline Fly Ash particles and by increasing the specific surface of the final product. POZZOCRETE products are available, depending on the product grade, in 30 kg paper bags, 50 kg HDP bags, Jumbo (big) bags carrying 1 – 1.3 ts , loose supply in 15 – 25 ts road tankers (bulkers)  and on customer request in break bulk shipments. The P-grades (with the exception of the P10 grade) are only available in big-bags or in bulker. The design of all Pozzocrete grades has taken into account the severe weather conditions in the areas where it may be supplied, in order to allow high cement replacement volumes insuring adequate strength development and good durability whilst avoiding short-term damage such as bleeding and thermo-hygrometric plastic shrinkage

Country of Origin : India

Number Of Flower : Fly Ash, Fly Ash Powder, Pozzolanic Powder

Certification : Iso 9001:9002, DCL.

Application : Building Construction, Concrete, Construction, Construction Industry

Feature : Longer Shelf Life

Condition : Dry, New

Form : Powder

Raw Material : Aluminate, Concrete, Fly Ash, Silicate, FINE SAND

Hardening Feature : Extra Rapid Hardening, Rapid Hardening, HIGH DURABILITY

Brand Name : POZZOCRETE

SiO2 Content (%) : 60.35

Al2O3 Content (%) : 93.26

MgO Content (%) : 2.04

Total Carbohydrate : 6 MONTH

Capacity(t/h) : 300 MT / DAY

CrO Content (%) : 0.70

Motor Type : GROUT

POZZOCRETE 100 is being manufactured at the DIRK POZZOCRETE plant at Nashik. 90 % of the particles of this product are below 10 micron whereas the mean particle size is 3 microns. The high silica content and sum of oxides (SiO2 + Al2O3 + Fe2O3) are similar to what would be expected for a Class F Fly Ash as per EN 450 or ASTM C 618 designation.   This makes POZZOCRETE 100 a substitute of silica fume in concrete whilst showing further advantages in durability, workability, sulphate and chloride resistance. POZZOCRETE 100 reduces the heat of hydration in concrete.   .  Advantages:1.The Ultrafine Fly Ash branded as  POZZOCRETE 100 can produce  concrete strength comparable with that produced with a highly reactive pozzolan such as Silica Fume (SF). To reach the performance levels of SF concrete at early age, generally the concentration of UFFA and SF are the same must be slightly and the total water in the concrete must be reduced by about 15-20 %; 2. POZZOCRETE 100 displays a strong tendency to reduce water demand. For comparable workability as SF concrete, a 15-20% reduction in total water content, together with as much as a 30% reduction in HRWR (=High Range Water Reducer), is possible; 3. POZZOCRETE 100 concrete also displays a lower tendency towards cracking due to drying and autogenous shrinkage compared with SF concrete; 4. Processing FA into an ultra-fine material like POZZOCRETE 100 with a refined particle size distribution clearly improves its performance as a durability-enhancing admixture. The practical significance of the increased reactivity, from a concrete technology perspective , is that a given improvement in performance canbe achieved at a lower level of replacement (that is, the ultra-fine material is more efficient) compared with an unprocessed FA and at an earlier age. As such, POZZOCRETE 100 offers a viable alternative to SF in certain applications.   

Country of Origin : India

Number Of Flower : Pozolanic Material

Certification : Pozolanic Material

Application : Building Construction,Cement,Concrete,Construction,Classifies Fly Ash

Feature : Safe Packing

Condition : Dry,New

Form : Powder

Raw Material : Aluminate,Cement,Fly Ash,Silicate,FINE SAND

Hardening Feature : Extra Rapid Hardening,Rapid Hardening

Brand Name : POZZOCRETE

SiO2 Content (%) : 60.35

Al2O3 Content (%) : 93.26

MgO Content (%) : 2.04

Total Carbohydrate : 6 MONTH

Capacity(t/h) : 300 MT / DAY

CrO Content (%) : 0.70

Motor Type : GROUT

Pozzocrete 100 is super fine fly ash which gives high early strength Silica Fume or Metakaoline along with all physical as well as chemical benefits of fly ash including durability. A General rule for fly ash is finer the fly ash lower is the water demand due to its spherical shape particles and P100 is no exception as being very fine material it consist numerous spheres to add in ball bearing effect hence P100 is such a material with one can make Concrete with lowest water cement ratio than any other pozzolanic material avaliable.

Number Of Flower : Concrete Mixers

Certification : ISI 3812

Application : Brick Work & RCC Roads

Condition : New

Country of Origin : India

These are polypropylene of 6 mm cut length. These micro fibers prevent crack formation and provide reinforcement. They are mainly used in plasters in finishing coat, for ornamental castings for crack prevention and as well as additional reinforcement. Suitable care has been taken to ensure dispersion of fibers during hand mixing of mortar. Suitable care has been taken to ensure dispersion of fibers in the mix.

Packaging Type : 20 Kg

Fiber Type : Pp fiber

Number Of Flower : Polypropylene Fiber,Pp fiber

Material : Polypropylene, Pp

Storage Condition : Pp fiber

Pattern : Printed

Fiber Length : 1-20mm, 20-40mm, 40-60mm

Density : 0.91-0.99g/cm3

Tensile Strength : NA

Country of Origin : India

Brand Name : NAAVPAD,Navpad

NAVPAD SALES StrongCrete Polypropylene Micro Fibre is a kind high intensity bundle monofilament made from virgin polypropylene through unique technology. PP Fibre are inherently acid-resistant, alkali-resistant, weak thermal conductivity and have extremely stable chemical properties, Adding mortar or concrete can effectively control the micro-cracks caused by temperature changes in the initial plastic shrinkage stage of mortar and concrete, prevent and suppress the formation and development of cracks, greatly improve the anti-crack and anti-seepage performance, anti-impact and anti-seismic ability of concrete, which can be widely used in underground waterproofing, roofing, wall and floor of industrial and civil construction projects. pools, basements, roads and bridges. It is a new ideal material for crack resistance, seepage resistance and wear resistance of mortar and concrete engineering.

Brand Name : NAVPAD SALES

Material : Polypropylene,Pp

Storage Condition : Feather Yarn

Grade : A

Packaging Type : 125 GM

Number Of Flower : Polypropylene Fiber

Fiber Length : 1-20mm,20-40mm,40-60mm,60-80mm

Fiber Type : PP

Tensile Strength : 1000

Country of Origin : India

Backed by years of industry experience, we are engaged in offering a premium quality range of Glass Fiber Chicken Mesh. We import Fiber Glass Mesh ranging from 45 gsm to 350 gsm are made non-alkaline, with high quality special glass yarns. The required chemical and physical characteristics as well as dimensional stability are achieved through special alkaline resistant finishes. Providing a proper use and observance of the plaster manufacturers working in building construction, this reinforcement fiber glass fabrics offer maximum security against tension. The reinforcement grids are highly unaffected by temperature, have excellent strength and an extreme resistance to alkali. The frequent occurring tensions in ceilings and walls are well compensated by the fabrics to prevent in the plaster. Fiber Glass Mesh is an ideal engineering material in construction and can be easily used to reinforce cement, stone, wall material, roofing, bitumen, gypsum, and so on. Alkali Resistant Fiber Glass Mesh is used for Internal & External Plaster Reinforcement. Description:The fiberglass alkali-resistant mesh is on the basis of alkali-resistant or C-glass or E-glass woven fabric, then coated by acrylic acid copolymer liquid. Features: Good alkaline-resistance High strength Excellent alkali and acid resistance Good cohesion Excellent in coating Application: Wall-reinforce Out-side wall heat insulation and waterproof Reinforcement of plastic, bitumen, plaster, marble, mosaic, etc. Ideal engineering material in construction.  

Country of Origin : India

Number Of Flower : Glass Fiber Reinforced Concrete Mesh, Fiberglass Mesh

Material : Material, Fiberglass

Application : PLASTER REINFORCEMENT

Size : 1Mtr X 50Mtr ( 45,60,80,90,100,120,& 145 GSM )

Micro Silica Micro Silica is designed to give a big Qualitative boost to Concrete. It is well recognizedthat Concrete Mix for High Strength cannot be achieved without some extra cementitiousmaterialbeyond Cement& Fly ash. HereMicro Silicaplays avital rolein   ü  IncreasingCompressive, Flexural andbondstrengthsinconcrete. ü  ImprovestheLifeofConcreteby actingasCorrosionInhibitorforReinforcement. ü  Improves the Life of Concrete by reducing Alkali-Silica Reaction (ASR)orConcrete Cancer. Micro Silica is a mineral admixture comprising of very fine solid glassy spheres of silicondioxide (SiO2). Micro Silica is fine amorphous silica with particle size around 100 timessmaller than averageparticlesizeofcement andflyash.     HigherCompressive,Flexural&BondStrengthwithMicro Silica ü  The silica present in Micro Silica, reacts with the weaker calcium hydroxide releasedduring the hydration of cement and forms additional calcium silicate hydrate (C – S –H). The concrete derives greater strength from higher concentration of strong CalciumSilicateHydrate replacingweak andeasily solublecalciumhydroxide.   ü  Micro Silica is like a pozzolanic material which provides more uniform distributionandagreatervolumeofhydrationinconcretestructures.ThischangestheRheologyofconcreteandreducesthewater-binderratio.Thisinturnresultsintohighercompressivestrength. ReinforcementCorrosionInhibitorroleofMicro Silica ü  With particle size of 1/100thof cement & fly ash, Micro Silica drastically reducestheaveragesizeofporesintheconcrete.Thisdrasticallyreduceswaterpermeabilityinconcrete.   ü  Lower water-binder ratio achieved by adding Micro Silica ensure that the concretedoesnot loose waterduring setting and nopin holes are created.   ü  It reduces the rate of carbonation, decreases permeability to chloride ions and impartshighelectricalresistivity.Henceitprotectsthereinforcement steeland embedment.   ü  As an additional functional benefit, this reduces the instances of damp and waterleakagetroubles.     ResistanttoConcreteCancer(Alkali-AggregateReaction)   ü  CementHydrationprocessproducesCalciumHydroxidealongwithSodiumandPotassiumoxides which has the followingimpacton concreteat a laterstage: §  With age the porosity of concrete gathers sufficient moisture to aid a swellingreaction between highly alkaline cement paste and the reactive non-crystallinesilica found in many aggregates. This form hydroscopic gel of Sodium Silicatewhich swells absorbing further moisture weakening the concrete and creatingcracks. These cracks lead to increased porosity which in turn exponentiallypropagates the process of disintegration. That is the reason it is termed asConcreteCancer.   §  IncaseofSulfateattack,freecalciumhydroxidereactstoproducecalciumsulphate.This brings acidity inconcrete andweakens thestructure. ü  Micro Silica acts with the policy of “fight Fire with Fire” to combat ASR reaction. Itinitiates a prompt reaction at early stage of concrete hardening. Thus, it binds thesetroublemakers, i.e.Calcium Hydroxide along with Sodium and Potassium oxides. Thus, they are arrested and quarantined notallowingthemtocreatemuchtroubleatlaterstage.AddtothisthefactthatMicro Silica has already reduced the porosity and hence curtailing the availability ofmoisture,theotherkey requirement for this process.     Recommendation   Micro Silica can be mixed between 5-10% of cement used in Concrete Mix for excellentperformance.

Country of Origin : India

Material : Natural Quartz, India

Purity : 99%

Feature : Eco Friendly, Leakage Proof, Perfect Finish, Premium Quality, Safe Packaging

Packaging Type : Bag, HDPE Bag, COSTUMISE PACKING

Packaging Size : 25 Kg

Microsilica can be used in concrete and refractory materials. Microsilica ,when used in concrete, it can improve concrete’s properties such as compressive strength, bond strength and abrasion resistance, reduces permeability,and therefore helps in protecting reinforcing steel from corrosion.   Micro Silica Micro Silica is designed to give a big Qualitative boost to Concrete. It is well recognized that Concrete Mix for High Strength cannot be achieved without some extra cementitious material beyond Cement & Fly ash. Here Micro Silica plays a vital role in                   ü  Increasing Compressive, Flexural and bond strengths in concrete. ü  Improves the Life of Concrete by acting as Corrosion Inhibitor for Reinforcement. ü  Improves the Life of Concrete by reducing Alkali-Silica Reaction (ASR) or Concrete Cancer. Micro Silica is a mineral admixture comprising of very fine solid glassy spheres of silicon dioxide (SiO2). Micro Silica is fine amorphous silica with particle size around 100 times smaller than average particle size of cement and fly ash.     Higher Compressive, Flexural & Bond Strength with Micro Silica ü  The silica present in Micro Silica, reacts with the weaker calcium hydroxide released during the hydration of cement and forms additional calcium silicate hydrate (C – S – H). The concrete derives greater strength from higher concentration of strong Calcium Silicate Hydrate replacing weak and easily soluble calcium hydroxide.   ü  Micro Silica is like a pozzolanic material which provides more uniform distribution and a greater volume of hydration in concrete structures. This changes the Rheology of concrete and reduces the water-binder ratio. This in turn results into higher compressive strength.   Reinforcement Corrosion Inhibitor role of Micro Silica ü  With particle size of 1/100th of cement & fly ash, Micro Silica drastically reduces the average size of pores in the concrete. This drastically reduces water permeability in concrete.   ü  Lower water-binder ratio achieved by adding Micro Silica ensure that the concrete does not loose water during setting and no pin holes are created.   ü  It reduces the rate of carbonation, decreases permeability to chloride ions and imparts high electrical resistivity. Hence it protects the reinforcement steel and embedment.   ü  As an additional functional benefit, this reduces the instances of damp and water leakage troubles.     Resistant to Concrete Cancer (Alkali-Aggregate Reaction)   ü  Cement Hydration process produces Calcium Hydroxide along with Sodium and Potassium oxides which has the following impact on concrete at a later stage: §  With age the porosity of concrete gathers sufficient moisture to aid a swelling reaction between highly alkaline cement paste and the reactive non-crystalline silica found in many aggregates. This form hydroscopic gel of Sodium Silicate which swells absorbing further moisture weakening the concrete and creating cracks. These cracks lead to increased porosity which in turn exponentially propagates the process of disintegration. That is the reason it is termed as Concrete Cancer.     §  In case of Sulfate attack, free calcium hydroxide reacts to produce calcium sulphate. This brings acidity in concrete and weakens the structure. ü  Micro Silica acts with the policy of “fight Fire with Fire” to combat ASR reaction. It initiates a prompt reaction at early stage of concrete hardening. Thus, it binds these trouble makers, i.e. Calcium Hydroxide along with Sodium and Potassium oxides. Thus, they are arrested and quarantined not allowing them to create much trouble at later stage. Add to this the fact that Micro Silica has already reduced the porosity and hence curtailing the availability of moisture, the other key requirement for this process.     RecommendationMicro Silica can be mixed between 5-10% of cement used in Concrete Mix for excellentperformance.  

State : Powdered

Feature : High Performance,Longer Shelf Life

Packaging Type : HDPE

Bulk Density : 500-1000 Kg/m3

Country of Origin : India

Packaging Size : 25 Kg

Metakaolin is a pozzolan, probably the most effective pozzolanic material for use in concrete. It is a product that is manufactured for use rather than a by-product and is formed when china clay, the mineral kaolin, is heated to a temperature between 600 and 800ºC. Its quality is controlled during manufacture, resulting in a much less variable material than industrial pozzolans that are by-products. First used in the 1960s for the construction of a number of large dams in Brazil, metakaolin was successfully incorporated into the concrete with the original intention of suppressing any damage due to alkali-silica reaction. When used to replace cement at levels of 5 to 10% by weight, the concrete produced is generally more cohesive and less likely to bleed. As a result pumping and finishing processes require less effort. The compressive strength of hardened concrete is also increased at this level of replacement. Slightly higher replacement levels (up to 20%) produce a cement matrix that has low porosity and permeability. This results in improvements to resistance of the hardened concrete to attack by sulfates, chloride ions and other aggressive substances, such as mineral and organic acids. Freeze/ thaw resistance is improved and the risk of damage resulting from the effects of impact or abrasion is reduced for metakaolin concrete that has been finished and cured properly.

Country of Origin : India

Number Of Flower : Cement Admixes

Condition : New

Packaging Type : PP Bags, Jumbo Bags

Metakaolin grades of calcined clays are reactive allumino silicate pozzolan formed by calcining very pure hydrous chinaclay. Chamically metakaoline combines with calcium hydroxide to form calcium silicate and calcium alluminate hydrates. Unlike other natural pozzolan metakaolin is water processed to remove unreactive impurities producing an almost 100 percent reactive material.the particle size of metakaolin is significantly smaller than cement particles. Is 456:2000 recommends use of metakaolin as mineral admixture. Metakaolin is a pozzolan, probably the most effective pozzolanic material for use in concrete. It is a product that is manufactured for use rather than a by-product and is formed when china clay, the mineral kaolin, is heated to a temperature between 600 and 800ºC. Its quality is controlled during manufacture, resulting in a much less variable material than industrial pozzolans that are by-products. First used in the 1960s for the construction of a number of large dams in Brazil, metakaolin was successfully incorporated into the concrete with the original intention of suppressing any damage due to alkali-silica reaction. When used to replace cement at levels of 5 to 10% by weight, the concrete produced is generally more cohesive and less likely to bleed. As a result pumping and finishing processes require less effort. The compressive strength of hardened concrete is also increased at this level of replacement. Slightly higher replacement levels (up to 20%) produce a cement matrix that has low porosity and permeability. This results in improvements to resistance of the hardened concrete to attack by sulfates, chloride ions and other aggressive substances, such as mineral and organic acids. Freeze/ thaw resistance is improved and the risk of damage resulting from the effects of impact or abrasion is reduced for metakaolin concrete that has been finished and cured properly.  

Number Of Flower : Metakaolin

Application : Cement Concrete

Feature : Good Plasticity,Good Quality,High Temperature Resistance,Natural

Condition : Good,New

Form : Powder

Packaging Type : Pp Bag,HDOE

Country of Origin : India

Packaging Size : 20-30 Kg,25kg bags

Backed by years of industry experience, we are engaged in offering a premium quality range of Glass Fiber Chicken Mesh. We import Fiber Glass Mesh ranging from 45 gsm to 350 gsm are made non-alkaline, with high quality special glass yarns. The required chemical and physical characteristics as well as dimensional stability are achieved through special alkaline resistant finishes. Providing a proper use and observance of the plaster manufacturers working in building construction, this reinforcement fiber glass fabrics offer maximum security against tension. The reinforcement grids are highly unaffected by temperature, have excellent strength and an extreme resistance to alkali. The frequent occurring tensions in ceilings and walls are well compensated by the fabrics to prevent in the plaster. Fiber Glass Mesh is an ideal engineering material in construction and can be easily used to reinforce cement, stone, wall material, roofing, bitumen, gypsum, and so on. Alkali Resistant Fiber Glass Mesh is used for Internal & External Plaster Reinforcement. Description:The fiberglass alkali-resistant mesh is on the basis of alkali-resistant or C-glass or E-glass woven fabric, then coated by acrylic acid copolymer liquid. Features: Good alkaline-resistance High strength Excellent alkali and acid resistance Good cohesion Excellent in coating Application: Wall-reinforce Out-side wall heat insulation and waterproof Reinforcement of plastic, bitumen, plaster, marble, mosaic, etc. Ideal engineering material in construction.

Number Of Flower : Fiber Glass Wool, Glass Fiber Plaster Mesh

Material : Fiber, Glass Fiber Plaster Mesh

Application : Plaster Reinforcement

Number Of Flower : While

Country of Origin : India

Brand Name : Dharmesh

with an objective to fulfill the ever-evolving demands of our clients, we are engaged in offering a wide assortment of cemfil anti crack hd glass fiber.price range: rs.96-258/kganti-crack hd (high dispersion) is an engineered ar-glass chopped strand designed for mixing in concrete and all hydraulic mortars.anti-crack hd fibers are typically used at low addition level to prevent cracking & improve the performance of concrete, flooring, renders or other special mortar mixes.they incorporate easily into mixes creating a multidimensional homogeneous network of reinforcement in the matrix.anti-crack?? hd fibres can be added at the central mixing plant to the wet concrete mix; or directly into the ready-mix truck.quality standards certification:fibres can be introduced directly in the ready mix plant or directly in the concrete truck. recommended dosage is 600 g/m3 (1 lb/cum) of concrete to control plastic shrinkage cracking anti-crak hd fibres are packed in individual paper bags (water dispersible) or in plastic bags.anti-crak hd fibres should be stored away from heat and moisture, and in their original packaging.the best conditions are:anti-crak hd fibres do not protrude through the surface and require no additional finishing procedures.the reinforcement is incorporated in the concrete mass and is invisible on the finished surface.high dispersion (220 million filaments per kg, 100 million per lb)excellent workability invisible on the finished surface does not corrode control and prevention of cracking in fresh concrete overall enhancement of durability and mechanical properties of concrete effective at very low dosage homogeneous mix safe and easy to handle loss on ignition: 0.55% (iso 1980: 1980)moisture: 0.3% max (iso 3344: 1977)material: alkali resistant glass*specific gravity: 2.68 g/cm3 electrical conductivity: very low chemical resistance: very high modulus of elasticity: 72gpa – 10 x 106 psi tensile strength: 1,700 mpa – 250 x 103 psianti-crak hd fibres are part of cem-fil product range     product description advantages and benefits features (nominal values)product application anti-crak hd (high dispersion) is an engineered ar-glass chopped strand designed for mixing in concrete and all hydraulic mortars.anti-crak hd fibers are typically used at low addition level to prevent cracking & improve the performance of concrete, flooring, renders or other special mortar mixes.they incorporate easily into mixes creating a multidimensional homogeneous network of reinforcement in the matrix.anti-crak?? hd fibres can be added at the central mixing plant to the wet concrete mix; or directly into the ready-mix truck.-anti-crak hd fibres do not protrude through the surface and require no additional finishing procedures. -the reinforcement is incorporated in the concrete mass and is invisible on the finished surface.-high dispersion (220 million filaments per kg, 100 million per lb)-excellent work ability- invisible on the finished surface- does not corrode -control and prevention of cracking in fresh concrete- overall enhancement of durability and mechanical properties of concrete- effective at very low dosage- homogeneous mix- safe and easy to handle- fiber length: 12 mm - filament diameter: 14m, (0.000546 in)- loss on ignition: 0.55% (iso 1980: 1980)- moisture: 0.3% max (iso 3344: 1977) material: alkali resistant glass* specific gravity: 2.68 g/cm3 softening point: 860??c - 1580??f-electrical conductivity: very low-chemical resistance: very high modulus of elasticity: 72gpa - 10 x 106 psi-tensile strength: 1,700 mpa - 250 x 103 psi* anti-crak hd fibres are part of cem-fil product range quality standards certification fibres can be introduced directly in the ready mix plant the best conditions are:- temperature: 15c - 35c.- humidity: 35% - 65%.hear i provide you a price for your demanded product quality.anti-crak 25. kg bags  quality a / b  &  c

Country of Origin : India

Material : Fiber Glass, Glass

Thickness : 12-15mm, 5-7mm, 17 MICRON

Brand Name : CEM FILL AR ANTI CRACK HD.

Tensile Strength : 238KG / CM SQ. / NEUTAN MM

With a firm commitment to quality, our organization is engaged in offering a wide ambit of Fiberglass Roll. Backed by rich industry experiences; we are highly engaged in offering a premium quality range of Fiberglass Roll. We have carved a niche for ourselves in this domain by providing a premium quality gamut of Fiberglass Roll.

Size : 0-50 Mtrs

Number Of Flower : Fiberglass Roll

Application : ALL CONSTRUCTION

Feature : Quality Tested,Waterproof

Pattern : Plain

Condition : New

Packaging Type : Roll Packed

Country of Origin : India

Heating Temperature : Fiberglass Roll

We are among the reputed organizations, highly engaged in providing an optimum quality range of Fiberglass Mesh.   With sincerity and hard work of our professionals, we have carved a niche for ourselves in this domain by providing a premium quality gamut of Fiberglass Mesh.

Brand Name : DURAMESH

Usage/Application : ALL CONSTRUCTION

Country of Origin : India

  Being a leading firm in this industry, we are offering a high quality range of Fiber Glass Mesh. Fiber Glass Mesh is an ideal engineering material in construction and can be easily used to reinforce cement, stone, wall material, roofing, bitumen, gypsum, and so on. Alkali Resistant Fiber Glass Mesh is used for Internal & External Plaster Reinforcement.  

Number Of Flower : water Chicken Mesh

Material : non woven glass fiber

Application : ALL CONSTRUCTION

Technics : Machine Made

Pattern : Checked

Country of Origin : India

REINFORCE PLASTER MESH ( CHICKN MESH ) As reinforcing material, plaster mesh is used for building internal and external decoration, especially in plastering work. It protects the plaster layer surface from cracking and increases the mechanical strength of the plaster layer. Meanwhile plastering mesh provides a better grip with plaster wall and forms the skeleton layers of the wall plaster and putty, thereby significantly strengthening the plaster layer and significantly extending its service life. Due to its strength and durability, plaster mesh is also successfully used as reinforcing material in strengthening the foundations of buildings, restoration and reinforcement of existing plaster, brickwork, installation of thermal insulation and roofing tile ties, and road laying pavement construction.

Brand Name : Dharmesh

Material : Glass Fiber

Application : Construction, Construction Wire Mesh, ALL CONSTRUCTION

Number Of Flower : Glass Fiber Plaster Mesh ( Chicken Mesh )

Country of Origin : India

Wire Gauge : 1-5mm

Cem-fil 572259-Cemfil-Anti-Crack(R) HD 12mm, 85 gms Pouch, 1 No (alkali resistant glass fibre)   Brand: Cem-fil     3.2 out of 5 stars    5 ratings                               10 Days Replacement     Currently unavailable.   We don't know when or if this item will be back in stock.                               Compatible Material Concrete Brand Cem-fil Package Information Pouch About this item Controls and prevents hair-line cracking in fresh and hardened concrete. High dispersion (220 million filaments per kg, 205 Kms running length in 1 pouch of 85 Gms) No need to alter the water cement ratio., Excellent workability , Effective at a very low dosage Invisible on finished surface , Homogeneous mix Overall enhancement of durability and mechanical properties of concrete   Specifications for this item Ball Material Type Very fine Glass Fibre Brand Name Cem-fil Compatible Material Concrete Extended Length 205000.00 meters Item Shape Firbes Material glass fibre Number of Items 1 Part Number Four P-38 Size 85 gms Pouch Specification Met Tested and approved for concrete reinforcement at IIT Mumbai and IIT Chennai PRODUCT DESCRIPTION ADVANTAGES AND BENEFITS FEATURES (nominal values)PRODUCT APPLICATIONAnti-Crak HD (High Dispersion) is an engineered AR-glass chopped strand designed for mixing in concrete and all hydraulic mortars.Anti-Crak HD fibers are typically used at low addition level to prevent cracking & improve the performance of concrete, flooring, renders or other special mortar mixes.They incorporate easily into mixes creating a multidimensional homogeneous network of reinforcement in the matrix.Anti-Crak?? HD fibres can be added at the central mixing plant to the wet concrete mix; or directly into the ready-mix truck.-Anti-Crak HD fibres do not protrude through the surface and require no additional finishing procedures. -The reinforcement is incorporated in the concrete mass and is invisible on the finished surface.-High dispersion (220 million filaments per kg, 100 million per lb)-Excellent workability- Invisible on the finished surface- Does not corrode -Control and prevention of cracking in fresh concrete- Overall enhancement of durability and mechanical properties of concrete- Effective at very low dosage- Homogeneous mix- Safe and easy to handle- Fiber length: 12 mm - Filament diameter: 14m, (0.000546 in)- Loss on Ignition: 0.55% (ISO 1980: 1980)- Moisture: 0.3% max (ISO 3344: 1977) Material: Alkali Resistant Glass* Specific Gravity: 2.68 g/cm3 Softening point: 860??C - 1580??F-Electrical Conductivity: Very low-Chemical Resistance: Very highModulus of elasticity: 72GPa - 10 x 106 psi-Tensile Strength: 1,700 MPa - 250 x 103 psi* Anti-Crak HD fibres are part of Cem-FIL product rangeQUALITY STANDARDS CERTIFICATIONFibres can be introduced directly in the ready mix plant or directly in the concrete truck.Recommended dosage is 600 g/m3 (1 lb/cum) of concrete to control plastic shrinkage crackingAnti-Crak HD fibres are packed in individual paper bags (water dispersible) or in plastic bags.Anti-Crak HD fibres should be stored away from heat and moisture, and in their original packaging.The best conditions are:- Temperature: 15C - 35C.- Humidity: 35% - 65%.Hear I provide you a Price for your Demanded product quality.Anti-Crak 25. KG BAGS   

Fiber Type : Concrete Fiber

Brand Name : CEM - FILL ANTI CRACK HD

Material : Glass

Grade : New

Eco-Friendly : Yes

Pattern : Siliconized

Shrink-Resistant : Yes

Packaging Type : Loose,20 KG BAGS

Fiber Length : 6mm,12mm,24mm,36mm

Packaging Size : 10-20Kg,20 & 30 KG BAGS

Usage : Concrete

Specialties : Eco-Friendly,Heat-Resistant,Shrink-Resistant

Availability : 10kg

Tensile Strength : 328KG/N2/ N/ MM

Thickness : 20-40micron, 0-10micron

Appearance : WHITE

Purity : 98%

Melting Temperature : 78 DEGREE

Absorption : 8 TO 12 DEGREE

Usage : Good

Anti-Crack HD (High Dispersion) is an engineered AR-glass chopped strand designed for mixing in concrete and all hydraulic mortars. Anti-Crack HD fibers are typically used at low addition level to prevent cracking & improve the performance of concrete, flooring, renders or other special mortar mixes.They incorporate easily into mixes creating a multidimensional homogeneous network of reinforcement in the matrix.Anti-Crack?? HD fibres can be added at the central mixing plant to the wet concrete mix; or directly into the ready-mix truck PRODUCT DESCRIPTION ADVANTAGES AND BENEFITS FEATURES (nominal values)PRODUCT APPLICATIONAnti-Crak HD (High Dispersion) is an engineered AR-glass chopped strand designed for mixing in concrete and all hydraulic mortars.Anti-Crak HD fibers are typically used at low addition level to prevent cracking & improve the performance of concrete, flooring, renders or other special mortar mixes.They incorporate easily into mixes creating a multidimensional homogeneous network of reinforcement in the matrix.Anti-Crak?? HD fibres can be added at the central mixing plant to the wet concrete mix; or directly into the ready-mix truck.-Anti-Crak HD fibres do not protrude through the surface and require no additional finishing procedures. -The reinforcement is incorporated in the concrete mass and is invisible on the finished surface.-High dispersion (220 million filaments per kg, 100 million per lb)-Excellent workability- Invisible on the finished surface- Does not corrode -Control and prevention of cracking in fresh concrete- Overall enhancement of durability and mechanical properties of concrete- Effective at very low dosage- Homogeneous mix- Safe and easy to handle- Fiber length: 12 mm - Filament diameter: 14m, (0.000546 in)- Loss on Ignition: 0.55% (ISO 1980: 1980)- Moisture: 0.3% max (ISO 3344: 1977) Material: Alkali Resistant Glass* Specific Gravity: 2.68 g/cm3 Softening point: 860??C - 1580??F-Electrical Conductivity: Very low-Chemical Resistance: Very highModulus of elasticity: 72GPa - 10 x 106 psi-Tensile Strength: 1,700 MPa - 250 x 103 psi* Anti-Crak HD fibres are part of Cem-FIL product rangeQUALITY STANDARDS CERTIFICATIONFibres can be introduced directly in the ready mix plant or directly in the concrete truck.Recommended dosage is 600 g/m3 (1 lb/cum) of concrete to control plastic shrinkage crackingAnti-Crak HD fibres are packed in individual paper bags (water dispersible) or in plastic bags.Anti-Crak HD fibres should be stored away from heat and moisture, and in their original packaging.The best conditions are:- Temperature: 15C - 35C.- Humidity: 35% - 65%.Hear I provide you a Price for your Demanded product quality.Anti-Crak 25. KG BAGS 

Brand Name : NAVPAD

Material : Glass

Usage : Concrete, Industrial, BLOCKS, BRICK, TILE ADHESIVE, BLOCK JOINT MORTAR, PAINT MFG.

Grade : New

Pattern : Raw

Width : MM

Packaging Type : HDPE BAGS

Packaging Size : 10-20Kg, 20-30Kg, 30-40Kg, 40-50Kg

Thickness : 17 MICRIN

Availability : 5kg, 10kg, 15kg, 2kg, 25kg, 30kg

Appearance : WHITE

Fiber Length : 6mm, 12mm, 18mm, 24mm, 30mm, 36mm

Absorption : SELF DISPER

Fiber Type : Chopped Strands

Tensile Strength : 256KG N / MM/CM2

Purity : 85

Country of Origin : India

Eco-Friendly : Yes

Elongation : -

Specialties : Eco-Friendly, Heat-Resistant, Anti - Crack

Shrink-Resistant : No

Anti-Crack HD (High Dispersion) is an engineered AR-glass chopped strand designed for mixing in concrete and all hydraulic mortars.Anti-Crack HD fibers are typically used at low addition level to prevent cracking & improve the performance of concrete, flooring, renders or other special mortar mixes.They incorporate easily into mixes creating a multidimensional homogeneous network of reinforcement in the matrix.Anti-Crack?? HD fibres can be added at the central mixing plant to the wet concrete mix; or directly into the ready-mix truck.Quality Standards Certification:Fibres can be introduced directly in the ready mix plant or directly in the concrete truck. Recommended dosage is 600 g/m3 (1 lb/cum) of concrete to control plastic shrinkage cracking Anti-Crak HD fibres are packed in individual paper bags (water dispersible) or in plastic bags.Anti-Crak HD fibres should be stored away from heat and moisture, and in their original packaging.The best conditions are:Anti-Crak HD fibres do not protrude through the surface and require no additional finishing procedures.The reinforcement is incorporated in the concrete mass and is invisible on the finished surface.High dispersion (220 million filaments per kg, 100 million per lb)Excellent workabilityInvisible on the finished surfaceDoes not corrodeControl and prevention of cracking in fresh concreteOverall enhancement of durability and mechanical properties of concreteEffective at very low dosageHomogeneous mixSafe and easy to handleLoss on Ignition: 0.55% (ISO 1980: 1980)Moisture: 0.3% max (ISO 3344: 1977)Material: Alkali Resistant Glass*Specific Gravity: 2.68 g/cm3Electrical Conductivity: Very lowChemical Resistance: Very highModulus of elasticity: 72GPa – 10 x 106 psiTensile Strength: 1,700 MPa – 250 x 103 psiAnti-Crak HD fibres are part of Cem-FIL product range PRODUCT DESCRIPTION ADVANTAGES AND BENEFITS FEATURES (nominal values)PRODUCT APPLICATIONAnti-Crak HD (High Dispersion) is an engineered AR-glass chopped strand designed for mixing in concrete and all hydraulic mortars.Anti-Crak HD fibers are typically used at low addition level to prevent cracking & improve the performance of concrete, flooring, renders or other special mortar mixes.They incorporate easily into mixes creating a multidimensional homogeneous network of reinforcement in the matrix.Anti-Crak?? HD fibres can be added at the central mixing plant to the wet concrete mix; or directly into the ready-mix truck.-Anti-Crak HD fibres do not protrude through the surface and require no additional finishing procedures. -The reinforcement is incorporated in the concrete mass and is invisible on the finished surface.-High dispersion (220 million filaments per kg, 100 million per lb)-Excellent workability- Invisible on the finished surface- Does not corrode -Control and prevention of cracking in fresh concrete- Overall enhancement of durability and mechanical properties of concrete- Effective at very low dosage- Homogeneous mix- Safe and easy to handle- Fiber length: 12 mm - Filament diameter: 14m, (0.000546 in)- Loss on Ignition: 0.55% (ISO 1980: 1980)- Moisture: 0.3% max (ISO 3344: 1977) Material: Alkali Resistant Glass* Specific Gravity: 2.68 g/cm3 Softening point: 860??C - 1580??F-Electrical Conductivity: Very low-Chemical Resistance: Very highModulus of elasticity: 72GPa - 10 x 106 psi-Tensile Strength: 1,700 MPa - 250 x 103 psi* Anti-Crak HD fibres are part of Cem-FIL product rangeQUALITY STANDARDS CERTIFICATIONFibres can be introduced directly in the ready mix plant or directly in the concrete truck.Recommended dosage is 600 g/m3 (1 lb/cum) of concrete to control plastic shrinkage crackingAnti-Crak HD fibres are packed in individual paper bags (water dispersible) or in plastic bags.Anti-Crak HD fibres should be stored away from heat and moisture, and in their original packaging.The best conditions are:- Temperature: 15C - 35C.- Humidity: 35% - 65%.Hear I provide you a Price for your Demanded product quality.Anti-Crak 25. KG BAGS 

Brand Name : ANTI CRACK HD. AR FIBER GLAS

Material : Glass

Availability : 25kg,85GM.

Grade : New

Pattern : Siliconized

Fiber Length : 6mm,12mm,18mm,24mm,36mm,3MM

Packaging Type : Loose,25kg

Fiber Type : Chopped Strands

Country of Origin : India

Eco-Friendly : Yes

Packaging Size : 10-20Kg,85GM.

Usage : Concrete

Specialties : Eco-Friendly,Heat-Resistant