Priya Enterprise Vavol, Gandhinagar, Gujarat

Key Considerations ISRI Specifications:Standards are defined by the Institute of Scrap Recycling Industries (ISRI), including: Density guidelines (e.g., 14–17 lbs/cu ft for unflattened UBC) Minimum size ranges (e.g., 24" × 30" × 40") Flattened vs. Unflattened: Flattened bales are denser and allow more weight per container Unflattened bales are larger in size but carry less weight Tying Method: Steel bands or wires are standard Skids are not allowed Purity:High-quality UBC bales typically contain up to 99% clean aluminium with minimal contamination Commercial Details Rate: ₹160–180 per kg (Aluminum UBC Scrap) Delivery Terms: Ex-Works / At our site Note Final dimensions, weight, and density should always be confirmed to match the buyer–seller agreement and container capacity 

Country of Origin : India

Application : Industrial Use

Twang is the ISRI code name for Insulated Aluminium Wire Scrap. It consists of aluminium wires with plastic or rubber insulation still attached. This scrap category is officially listed in the ISRI Scrap Specifications Circular under non-ferrous scrap.   Key Points (Extracted) The percentage of aluminium content is not fixed by ISRI standards. Aluminium recovery percentage is agreed between buyer and seller, usually based on sample analysis. The scrap contains insulation and may include minor contaminants. It is generally not considered a direct melting grade unless insulation is removed. Insulation is typically stripped before melting to avoid furnace problems TWANG.AL.SCAP.FILE3 . Typical Appearance Twang scrap usually appears as coils or bundles of insulated aluminium wires or cables, such as: Electrical cables with coloured insulation Industrial feeder wires Insulated service cables Before remelting, insulation is normally removed mechanically to recover clean aluminium

Country of Origin : India

Aluminium Scrap TENSE – ISRI Details TENSE is the ISRI classification for Mixed Aluminium Castings, commonly traded worldwide for remelting and secondary aluminium production. ISRI Definition (Extracted & Paraphrased) TENSE shall consist of all clean aluminium castings, which may include automobile and airplane castings, but must not contain ingots.The material must be free from iron, brass, dirt, and other non-metallic materials.Oil and grease content shall not exceed 2% TENSE.SCRAP.FILE5 . Primary Features of Aluminium Scrap TENSE Material Form: Aluminium castings(engine blocks, transmission housings, pump bodies, machinery cast parts) Condition: Clean and dry Oil & Grease: Maximum 2% Contamination: No iron or steel No brass No dirt or non-metallic debris No ingots allowed Typical Use: Remelting for secondary aluminium alloys Typical Aluminium Content: Approximately 95–99%, depending on alloy mix and cleanliness Common Sources: Automotive engine blocks Gearbox housings Industrial aluminium cast components TENSE.SCRAP.FILE5 Physical Characteristics Irregular, bulky casting pieces Rough surface texture from casting process Possible machining marks Ferrous attachments must be completely removed 

Material : Aluminium

Application : Recycling Use

Country of Origin : India

Official ISRI Description TALLY refers to clean aluminium alloy sheet scrap that is unpainted, uncoated, and free from contaminants, mainly generated from new industrial (prompt) scrap. It is considered a premium melting-grade aluminium scrap. ISRI Definition: Aluminium TALLY Full Description: All-aluminium radiators, condensers, and heater cores from automobiles, trucks, and other vehicles. Common Characteristics No iron core No heavy plastic parts No copper tubing or brazing Minimal contamination High aluminium recovery Typical Source Materials All-aluminium car radiators Aluminium AC condensers Aluminium automotive heat exchangers

Country of Origin : India

Application : Recycling Use

Aluminium Scrap Zorba is a commonly traded non-ferrous scrap material widely used for melting and recycling purposes What is Zorba (ISRI Definition) Zorba is officially defined by the Institute of Scrap Recycling Industries (ISRI) as Shredded Non-Ferrous Scrap, predominantly aluminium. It: Consists mainly of aluminium, along with other non-ferrous metals such as copper, lead, magnesium, stainless steel, nickel, tin, and zinc, in elemental or alloy form. Is produced through shredding and advanced separation processes including eddy current separation, air separation, flotation, screening, and magnetic separation to remove free iron. Must be completely free from radioactive materials, dross, and ash. Is classified into grades (e.g., Zorba 85, Zorba 90, Zorba 95), where the number represents the estimated percentage of non-ferrous metal content. Higher grades indicate higher aluminium content and lower impurities. Actual specifications and impurity limits are subject to mutual agreement between buyer and seller, as per ISRI guidelines Packaging & Logistics 40 ft ISO Container Load capacity: 20–26 tonnes Designed for maximum bulk economy and large-volume international exports Suitable for automotive shredder scrap 20 ft ISO Container Load capacity: 14–18 tonnes The material is optimized for international bulk handling with minimized cost per unit, making it ideal for large-scale recycling operations 

Country of Origin : India

Material : Aluminium (mixed Alloys), Copper / Brass, Zinc

Application : Melting And Recycling Purposes

ISRI-Based Explanation of Aluminium Scrap “Taint / Tabor” Taint / Tabor is a widely traded melting-grade aluminium scrap used by recyclers and foundries worldwide. It is an official grade defined by the Institute of Scrap Recycling Industries (ISRI). What Is ISRI Taint / Tabor Aluminium Scrap? Taint / Tabor refers to clean, mixed old-alloy aluminium sheet scrap suitable for melting and recycling. It is globally recognized and commonly traded under HS Code 76020010 TAINT TABOR.FILE6 Official ISRI Description According to ISRI scrap specifications, Taint / Tabor: Shall consist of clean old alloy aluminium sheet and sheet utensil scrap Must contain two or more aluminium alloys Must be free from: 7000 series aluminium Foil Venetian blinds Castings Hair wire and screen wire Food or beverage containers Radiator shells Airplane sheet Bottle caps Plastic, dirt, and other non-metallic materials Oil and grease content shall not exceed 1% Up to 10% painted sheet, siding, or awnings is permitted (subject to agreement) TAINT TABOR.FILE6 Typical Physical Form & Appearance Used aluminium sheets from old sources Flat pieces of varying thickness Minimal paint or surface weathering Sheet form only (not shredded or granular) Commonly Excluded Materials Foil Plastic or rubber Castings Venetian blinds Food and beverage containers Wires and screen wire Radiator shells Non-metallic debris

Application : Recycling Use

Al Content (%) : 99%

Country of Origin : India

Typical Form: Turnings, pipe cuttings, shaft cuttings, plate scrap Properties: Ferritic / martensitic stainless steel Chromium content: ~11.5–13.5% Moderate corrosion resistance, good mechanical strength Magnetic in nature   Use: Feedstock for magnetic stainless steel products and heat-treated components

Application : Feedstock For Magnetic Stainless Steel Products And Heat-treated Components

Material : Stainless Steel

Material Grade : 410

Country of Origin : India

Typical Form: Similar scrap shapes to 304, generally heavier pieces from manufacturing waste Properties: Austenitic stainless steel with molybdenum addition for superior corrosion resistance Typical composition: Chromium: ~16–18% Nickel: ~10–14% Molybdenum: ~2–3% Especially resistant in chloride and marine environments   Use: Melting into higher-value stainless alloys for marine, chemical, and industrial equipment

Application : Recycling Use

Purity : 99%

Country of Origin : India

Material : Stainless Steel

Typical Form: Shredded pieces, solid scrap, offcuts Properties: Most commonly used austenitic stainless steel Contains approximately 18% chromium and 8–10% nickel Provides excellent corrosion resistance Use: Melting into ingots or billets, further processed into flat and finished stainless products

Material : 304 Stainless Steel

Application : Recycling Use,Melting Into Ingots Or Billets, Further Processed Into Flat And Finished Stainless Products

Condition : Waste

Country of Origin : India

Typical Form: Offcuts, sheet scrap, coils, cut pieces Properties: Austenitic stainless steel with higher manganese and lower nickel Offers lower corrosion resistance compared to 300 series stainless steel General Characteristics: Austenitic SS with higher Mn, lower Ni Suitable for general structural applications   Use: Feedstock for stainless steel mills, especially where 201 alloy is acceptable

Application : Recycling,Feedstock For Stainless Steel Mills, Especially Where 201 Alloy Is Acceptable

Country of Origin : India

Material : 201 Stainless Steel

Thickness : 20-40mm