Arotek Scientific Instruments Pvt. Ltd. Parsik Nagar, Thane, Maharashtra

The XGT-7200 represents a completely new generation of XRF microscope, and leads the way to a new era of science. It offers a seamless merger between optical observation and elemental analysis functions, revolutionizing the world of micro-analysis and establishing micro-XRF as a routine tool for the research and analytical scientist. Unique hardware features ensure the system offers versatility and flexibility for every measurement. A choice of two software controlled x-ray guide tubes with diameters ranging from a unique 10 µm through to 1.2 mm allow conditions to be optimised for a range of measurements, including both micro and macro. Similarly, with the unique Dual Vacuum Modes it is possible to switch within seconds between a high sensitivity full vacuum mode and a versatile localised vacuum mode. The latter maintains samples at atmospheric pressure whilst retaining sensitivity to all elements from sodium to uranium. In any configuration the intelligent combination of optical cameras ensure that the precise analysis position can be quickly and simply located. Features   The unique features of the XGT-7200 have seen this innovative micro-XRF analyser widely embraced for a range of applications, including electronics, engine wear analysis, forensic science, geology, mineralogy, pharmaceutics, museums, metallurgy, biology, medicine and archaeology. The flexible XGT-7200 micro-XRF system covers everything from macro analysis, for a general survey of a wide area, to the inspection of a specific micro area, with simultaneous XRF and transmission imaging. Its many features ensure high performance analysis with easy operation.  

This instrument is based on the principle of photoelectric effect & D65 light source (R457) and with 0/d or d/0 as a illumination condition. Meanwhile, except solution or liquid samples, this instrument can be widely measured the whiteness value of any substances. Such as : powder,  board,  paper , paste,  sheet, clay, etc. Chemical & Building materials industry: White Cement (powder), Paint (pasty), Coating (pasty), Plastic (boards), Steel Plate (boards), Ceramics (powder), Gypsum (powder), Wallpaper (paper/sheet), Porcelain Enamel (powder), Calcium Carbonate (powder),etc. Cosmetic industry: Toothpaste (paste), Face Cream (paste), etc. Food industry: Flour (powder), Starch (powder), Salt (powder), Sugar (powder), Fish Balls (paste) Etc Paper making industry: Paper Factory (paper/sheet), Printing Factory (paper/sheet), Publishing Company (paper/sheet), etc Textile industry: Fabric (sheet), Gauze (sheet), Weaving factory (sheet), cotton (clumps), etc.

UV VISIBLE SPECTROPHOTOMETER Double beam  spectrophotometer with  highly stable optics.  Extremely versatile with full functionality from 190 to  1100  nm. Variable spectral bandwidth 0.5, 1, 2, 4, 5 nm. 2 or 8 cell holder available. 6 inches LCD display & integrated user interface. USB port for data storage. ISO/CE Certificate passed. A & E Lab PC software included as standard. Extensive range of accessories available.AES90 Series are wide  screen double beam spectrophotometer. Its integrated design  assures long term stability and durability. The highly stable optics and two detectors measure the sample and reference  simultaneously optimising measurement accuracy. It has measurement modes for photometrics, concentration, multi-wavelength, spectrum scanning, kinetics,  quantitation, DNA and protein analysis.  The PC software is supplied as standard and offers additional  functionality with preloaded methods for DNA and protein analysis, as well as extensive post-measurement tools, unlimited results saving and easy export of data. The precisely aligned detector and quality deuterium and halogen lamps enhance the precision across the uv/vis  spectrum starting from 190nm and into the near-infrared 1100nm. It is ideal for quality control, general research, pharmaceutical, biochemical and clinical laboratory applications.  

Material testing machines can analyze the whole testing result including elongation, stress, strain, break value and average value. It can also fit to different specimen shape or be required to destroy the specimen and record the entire testing process and analysis the physical features of the specimen like tension force, bending strength, wear-resisting, impact, torque force, abrasion, fatigue, hardness, peeling force, viscosity...etc. We also supply the specimen maker equipment like pneumatic specimen press, hardness specimen cutting device, electrical forming machine. These equipment can make the standard specimen to get precise result during test.  

This instrument is measured bydetecting and quantifying the  scattering of light in water (solution). It is designed for turbidity measurement in accordance with  International Turbidity Measurement Standard ISO7027. It widelyapply  to the turbidity measurement in Waterworks, Life Sewage Treatment Plants, Drink Factories, Environmental Protection Departments, Process  Water, Brewage & Drugs Manufactures, Guard Departments, Hospital, etc  Characteristics: Compact in size, novel in design & LCD display with suitcase package. Easy operation, suitable measurement range & higher performance. Low daft, High Accuracy, Nice Stability ensure long-time & stable running. Unique positioning structure & high precision pptical system effectively Guarantee measuring values accuracy and repeatability. Lower consumption and AC & DC power supply convenience for operating outside or laboratory. With low voltage indication function remand of users replace battery timely. With data output interface.

HORIBA's SLFA series of sulfur-in-oil instruments have for years been the overwhelming choice in the petroleum industry. Continuous improvements  in performance and usability allow us to offer a range of instruments to suit your requirements.HORIBA XRF sulfur analyzers comply with ASTM D4294 and ISO 8754 while offering the most cost effective alternative for sulfur in petroleum measurement. Features   Wide measurement range (0-9.999%) is acceptable for very small content as in diesel oil or high sulfur content as in heavy oil. Calibration graphs have been extended and the analyzer selects automatically out of seven scales (0.002/0.01/0.05/…/10%). High precision measurement (Repeatability:1.6ppm, Lower detection limit: 5ppm) Due to the miniature X-ray tube, extremely precise results can be achieved without purging of He or another gas and this system also include a correction function for temperature and atmospheric pressure without He purge. SLFA-2800 is equipped with a turntable, which makes sequential measuring of up to eight samples. Standards applied to device measurement functions: JIS K2541, JIS B7995(Japan), ASTM D4294(USA), ISO 8754

HORIBA has been selling the XGT-WR series of EDXRF analyzers for many years, to providing screening measurements of samples containing hazardous elements such as Pb, Cd, Hg, Cr, Br, Sb, As for RoHS, ELV, and Cl for halogen free applications. XGT systems are used daily throughout the world.  HORIBA has now developed the new MESA-50 EDXRF analyzer, based on its long experience with customer requirements and knowledge. MESA-50 provides user friendly operation and good performance. MESA-50 includes three analysis diameters, suitable for every sample, from thin cables and electronic parts to bulk samples. The combination of SDD detector and DPP changes the image of EDXRF.  HORIBA's new MESA-50 supports ecological procurement it contributes not only to EU RoHS and ELV compliance testing, but also regulatory work for many other countries. Features 1. Speedy Silicon Drift Detector (SDD) drastically reduces measurement times, and provides increased sensitivity, for true high throughput analysis. 2. Small Portable, small footprint and light weight Internal battery power supply 3. Simple Reduce routine maintenance work (LN2free operation) No need for vacuum pumps Intuitive simple measurement process for all material types 4. Smart English / Japanese / Chinese user interfaces Excel® data management tool 5. Safe   No worry about X-ray leakage

According to Wolf Wilborn standard, this tester is designed to measure the coating hardness scrape-resistance, applied to experiment analysis or control production quality, suitable products including oil painting, furniture, car, cell phone, notebook, language translator, digital camera, etc. It is fast and easy to test single or double layer baking varnish.  

Ideal for the laboratory or plant floor, the model RT-6000 is a simple-to-use, off-line instrument that indicates relative opacity of plastic film, paper, laminates, printed packaging and other materials.  With a single pass of the light source through your material, the system measures relative light transmission on a scale of 0 to 100 Opacity Units, representing perfectly transparent to purely opaque materials, respectively.  

MIT Folding Endurance Tester provides a specific load and in a angle of ±135° to fold the specimen. When achieve the specific times or specimen broken or short of electric power, this tester will auto stop and record the times. For testing the folding endurance for materials of circuit soft board, copper foil, paper etc., both sides (left and right) of folding testing angle can be set on 90~135 degree and testing speed 175 times per minute. The tester would stop automatically and record the folding times when specimen is cleavage. This tester also can open circuit to stop the machine working function by voltage loop detect. This tester is available to change folding R angle and clearance by different grip.

Nano-200 is a Nucleic Acid Analyzer designed for analyzing the concentration and pure of Nucleic Acid (DNA/RNA). Simply pipette 0.5~2ul sample onto the pedestal, laying down the sampling arm, Nano-200 can automatically complete the measurement within 5 seconds.

Advanced true -color VGA touch  screen is easy for operation and   observation. 8-level linear temperature rise  design is satisfactory for varied temperature rise options Wider temperature control scope  and higher temperature  accuracy Optimal cooling rate and sample  test speed Exclusive integral design It’s completely in line with pharmacopeia and GLP  requirements.

Melt Indexer is made according to ASTM D1238. MI value means to measure polymeric material at certain temperature and under fixed load, the flow extrusion Weight within specific time. Therefore, melt Indexer can test melt polymeric material flow speed rate, the higher M1 value means fluidity is also higher. 

JIS C2107/Z0237   Manual Roller. This roller provides a stable pressure to fix the specimen to a panel.

Table type of Manual Press Forming Machine with new design, small and light, more convenience for operating. Great assistant for making specimen  

The Gravity Meter is designed according to the Principle of Archimedes. The appearance of the testing sample is not limited, so it’s more easy to use.  

Single-angle gloss-meter is widely used in decorative materials, such as marple,  granite, polishing brick, ceramic, and mold industries. All kinds of coating and surfaces, such as paints, varnishes, printing, ink, automaker, leather craft, woodenware, plastic, paper, etc. Instrument has the main functions below: 1.One key to get loss values in a measurement. The incident angle of light conforms to ISO2813. 2.Humanism design, friendly graphical user interface. 3.1000 test records storge, data storage structure:100 samples and it can save 100group data for each sample. 4.Data browsing function. 5.Signs for low battery and full memory. 6.USB communication and Bluetooth communication function. 7.SD card storage function. 8.It can print the result by connecting with micro printer. 9.PC data analysis and management software. Accessory list: 1. Power supply: Instrument needs only 5V power supply. No-load voltage is5.3V. 2. Holder with Calibration Board. 3. USB cable. 4. CD: It contains the PC software  and the instruction manual. Optional accessory: 1.SD card: SD card is provided as an optional accessory. 2.Micro printer: Print the test result. Technical Specifications: Model HP-300 Specifications Unit Single-angle gloss-meter Measuring angle Angle 60° Measuring Range GU Gs(60°):0~1000 Measuring Spot mm Gs(60°):9x15 Resolution GU 0-100:0.1, 100-1000:1 Repeatability GU 0-100:0.2>0100:0.2% Deviation GU 0-100:+/-1.5>100:+/-1.5% Zero-point Deviation GU 0.2 Operating temperature °C 10°-40° Storage Temperature °C -10°-70° Relative Humidity Up to85%,no moisture condensation Power Supply Four AAA-sized alkaline cell. USB/DC Adapter Volume mm 163.8x58.1x88.3 Weight g 520

Country of Origin : India

Number Of Flower : Gloss Meter

Material : Aluminium

Shape : Rectangular

Application : Industrial

Feature : Durable

Country of Origin : 220V

Condition : New Used

New Type cube-corner Michelson interferometers features smaller size and compact structure, providing higher stability and less sensitive to vibrations and thermal variations than conventional Michelson interferometer. Fully sealed damp and dust proof Interferometer. Isolated IR Source and large space heat dissipation chamber design provides higher thermal stability. High intensity IR Source. Various IR Libraries are available. Accesories such as Defused / Specular Reflection , ATR, Liquid Cell, Gas Cell and IR Microscope can be mouted in sample chamber.  

Size:410*675*410 mm Weight:10kg Detection Limit: K:0.004 mmol/L, Na:0.008 mmol/L Linearity Range: K: 0.02 mmol/L-0.1mmol/ L , Na: 0.1mmol/L-0.5mmol/L. Linearity Error: K : 0.005mmol/L,Na : 0.03mmol/L Repeatability: Relative Standard Deviation : 3%

Multi-point push-button calibration allows user to uses customized calibration solution (Up to 3 points, Default B4uS, 1413uS, 12.85mS and 111.8mS). Auto-Ranging for conductivity and temperature units (ºC or ºF ). Automatic Temperature Compensation ensures high accuracy of measurements. Automatic endpoint function freezes the stable measured values for easy reading and recording data. Help message as a operational guide to helps you understand how to use meter. Setup menu lets user customize the calibration points, temperature units, auto-off function to meet personal preferences. Reset function allows user to returns all settings to the factory default value

1.Single Point Push-Button Calibration: DDS-W series with single point calibration function, you need only set conductivity value of the calibration solution at 25 Deg C and immerse conductivity electrode into solution, then press ENTER key, the meter will calibrated automatically.   2.Auto-Ranging for Conductivity: The meter with auto-ranging function when measure conductivity. After electrode immersed in solution, the meter will fast response and convert range.   3.Auto Temperature Compensation: DDS-12DW will recognize the temperature sensor automatically and measure temperature after temperature sensor connected to the meter. If the conductivity electrode connected to it, the meter will enter automatic temperature compensation.   4.Adjustable Temperature Coefficient: Different ion solution usually have different temperature coefficient, setting temperature coefficient correctly is very important to measurement, DDS-W series can be set in the range of 0 to 3.9%per centigrade degree. 5.Adjustable Cell Constant: When measuring higher or lower conductivity solution, you should choose conductivity electrode with different constant. The meter with three cell constant (0.1,1,10) for your choice.

Adopt LCD display, makes reading more comfortable and free of natural light. Easy operation, suitable measurement ranges, rational price & high performance. It can be widely apply to all kinds of industries. Unique positioning structure, high precision of light path, effectively ensure long- time & stable running.                                Fast multi-calibration and can select 1~7 points calibration automatically. Built in clock memory function can save  measurement and calibration data easily. With RS232 interface can be connected printer. 

ASTM D2210, TAPPI TT403, JIS L1096/L1018/P8112/P8131 This Bursting Strength Tester uses oil pressure to break specimen through rubber film. This tester is used to test the breaking strength of paper, leather, textile etc. 

This instrument is measured by detecting and quantifying the scattering of light in water (solution). It is designed for turbidity measurement in accordance with International Turbidity Measurement Standard ISO 7027.It widely apply to the turbidity measurement in Waterworks, Life Sewage Treatment Plants, Drink Factories, Environmental Protection Departments, Process Water, Brewage & Drugs Manufactures, Guard Departments, Hospital, etc