Cable Tester Dealers

NAUGRALABS LABORATORY PRODUCT NAME: PLIABILITY TESTER FOR CABLES FOR TESTING LAB NaugraLabs Laboratory Product Code: NLE-Export-104005 Description and Specification for Lab Tenders Pliability Tester For Cables For Testing Lab Workshop. Pliability Tester For Cables - For Testing Lab Pliability of Cables is determined by determining the force exerted by the cable specimen at a specified distance while bending to a specified degree or determining the degree of bend for exerting a specified force at a specified distance.   The  Pliability Tester for Cables consists of digital balance fitted on a rigid base. One end of the cable under test is held in a rotating grip, while the other end is resting on a wedge on the balance at a distance of 76.2 mm (3”) from the rotating grip pivot. A pointer is attached to the grip and angle of movement of grip is indicated on a circular scale. civil lab equipments manufacturers

Features: The model AMS-1070M measures an increase in DC resistance due to deterioration of the secondary cable or Kickless Cable and also detects an abnormality in the secondary circuit caused by insufficient bolting or oxidizing of the contact surface. 

We are offering cable tester model 5199. Description model 5199 works on a proven "pulse reflection technique" & can detect most common faults quickly. It transmits a pulse of controlled pulse width & amplitude along the pair under test. The pulse travels with a fixed velocity & propagation which depends on the dielectric material surrounding the conducter - (pvc, jelly, paper etc.) whenever there is a change of characteristic impedence, a part of pulse energy reflects back to the source & both inerdent & reflected pulse are displayed on crt. The distance to fault is computed & displayed on 4 12 digit led display. Specification range : 5 kms10kms accuracy : + 1 % display : cathode ray tube : 95 mm rectangular 7-segment, 4 12 digit led

Scans for continuity, open, short as well as reversal and crossed wiring. Features with Auto or Manual scans for pin-out indicators. Built-in tone generator for cable tracing & identification. The remote terminator can be used to test the existing cable installations. Patch panel and wall plates can also be easily tested with the RJ45 adapter cable. RJ45 to BNC adapters allows for testing & tracing of BNC cables. Battery low indicator prevents misreading results.

Brand Name:-SAMTEKLAB Cable tester Use of Cable tester Cable Tester capable of identifying Up-to 16 Lines. Supplied With transmitted,Recever and Batteries of 9v. Accuracy is Minimum1%. DC Voltage Check On line Between 5 & 16V.           

Transmitter & receiver Included. To identify & trace up to 16 cables.It can also be connected to heat and water supplying 　installation system. Digital display on the receiver indicates the relative cable.

Cable Insulation Tester is similar to ELD with the most important difference that this monitors the signaling cables in un-energized mode. Insulation Resistance value ranging from 500 KO to 100 MO. It has a special feature, in case a pair is energized the instrument automatically stops functioning.

Bestnet carries a line of Network LAN tester provide you with an economical way to test Cables & Networks. These Ethernet Testers are specially designed to test the full range of the ever-expanding Ethernet, Lan Data and cable configurations. These ethernet Lan Testers is a must for anyone in the cabling industry.    Functions : » Can test correspondingly double-twisted cables1, 2, 3, 4, 5, 6, 7, 8 and G, meanwhile, can judge wrong connection, short circuit and open circuit. NS-468B tests BNC, RJH and RJ45; NS-468 tests RJ11 and RJ45; NS-468N tests RJ45 and BNC; ST-248 tests RJ45 and BNC      Test of double-twisted cables : » Switch on the power. (S is slow automatic grade, M is manual.) Put cables into both main tester and remote tester. The lights of the main tester will turn on sequentially from 1 to G.      Main Tester : » 1-2-3-4-5-6-7-8-G       Remote Tester : » 1-2-3-4-5-6-7-8-G RJ45 » 1-2-3-4-5-6-------- RJ12 » -2-3-4-5------------ RJ11      Following are erroneous connections : » If one cable, for example, cable No. 3 is open circuited, the two No. 3 lights of the main tester and remote tester will not turn on. » If several cables are not connected, several lights will not turn on respectively. If less than two cables are connected, none of the lights is on. » If two ends of the cable is disordered, for example No. 2 and No. 4, then displays on:Main Tester : 1-2-3-4-5-6-7-8-GRemote Tester : 1-2-3-4-5-6-7-8-G » If two cables are short circuited neither of the corresponding lights is on of the remote tester while main tester remains unchanged. If three cables, including three, are short circuited, none of the corresponding lights is on.   If test patch panels or wall plate outlets, two cables which can match each other (eg 110P4 and RJ45) will be connected to the tester. If test cables of the same axes, BNC turns on when the cable works.    

The 3665-20 is a hand-held LAN cable tester to easily test wiremap, measure cable length and identify twisted-pair cables, and is useful for verifying connections after installing connectors on cables.

» 1 to 1,000 MHz frequency range. Certifies twisted pair to all approved ISO and TIA standards, including ISO Class F. » Exceeds Level III and proposed Level IV accuracy specifications. » Improved result reporting displays all data in easy to read summary, detailed and graphical formats. » Powerful diagnostics locate link disturbances on each pair, displaying the size and distance to the disturbances in a straightforward manner, speeding link failure recovery. » Unique “connector-less” recessed copper and fiber optic adapters eliminate virtually all potential adapter or tester damage…keeping your SCT on the job. » Powerful SQL based certification management software allows quick organization, editing, viewing, printing, saving or archiving test results by job site, customer, campus building and more.