Gubbi Constro Chem Pvt. Ltd. Thane West, Maharashtra

Wire Type : Yes

Country of Origin : Made in India

Application : Roof coating

Packaging Size : 20 L

Packaging Type : Bucket

Rectangular Sacrificial Zinc Anode is an anode specially designed for highly corrosive industrial applications. They are used in concrete to prevent further corrosion. The sacrificial zinc anode is surrounded by alkali-activated mortars. Once installed or fastened to the reinforcement steel, the zinc core corrodes and protects the reinforcement steel.

Certification : ASTM B 418 95 A

Usage : Galvanising

Form : tie

Shape : Rectangular

Finishing : Unpolished

Material : Concrete

Brand Name : Constro Chem

Application: RCC Repairs. Steps. Repair of water tanks. Repair of balconies and window sills. Repair of bridges, tunnels. Advantages: Excellent Flexibility. Good corrosion and superior water resistance. Prevents rusting. High early strength. Ready to use. Installation: Remove all loose particles. Clean with hand / mechanical wire brush. Apply rust remover After 24hrs apply two coats of rust preventer. Add water as per required consistency. Apply with hand packaging in layers. Packing: 25 Kg. Storage: Store in cool, dry place away from direct sunlight. Firstaid Measures: Skin Contact : Wash immediately with soap and water throughly. Inhalation : Move to open air. Contact with eyes : Wash immediately under running water.

Product Description:- Rainguard is an Elastomeric polymer with the property of viscoelasticity (elasticity), generally having notably low Youngs modulues and high yield strain compared with other materials. Application: Residential and Commercial Buildings. Multi storey car parks & podiums. Overhead water tanks. Industrial buildings & power plants. Chimney. Bridges. Advantages: Prevention from water ingress. Prevention from vegetation, algae, dust. Prevention from carbon. Prevention from heat, U.V. Very high crack bridging capacity. Low cost. Washable coating with durability. Coverage: Each pack of 1kg is sufficient for an area of 45 - 50 sq.ft, to achieve recommended thickness of 200 to 250 microns. Installation: All surfaces to be coated must be clean, dry and redo loose and deboned plaster Cracks are to be filled from crack filler material. Before application, any loose adhered coating must be removed. Prime the surface with RAINGUARD Primer. Dilution for 1st coat 40% & for 2nd coat 25% (by volume) with water. Containers should not be left opened for extended periods of time. Brush: Good quality synthetic bristle brush. Roller: Short nap roller. Clean Up: Water.

We are offering polyurethane coatings. Product description: pu guard is high performance water based coating. Applications: roof / terrace / bathroom and toilet. podium. car parking / swimming pool. Advantages: non-toxic. water bases product. Hence, a green product. flexible at wider temperature range. can be applied in moist roof also. excellent water vapour barriers. good compatibility with tile. Application methodology:- remove dust, flakes, or other foreign particles by jet or dry air and clean the surface mechanically or by grinding to make it smooth before application. prime the surface with the mixture of pu guard and water in 50:50 ratio and apply. allow it to dry completely. Slightly damp surface will help coating. apply pu guard by brush or roller on primed surface as first coat. Apply first coat with dilution 10% - 15% with water. apply second coat with dilution 10% - 15% with water. Health and safety:- use mask, nose cover and hand gloves during application. clean hands with soap water after application. Packing:- available in 20kg pack. Storage:- store in a cool dry place under shed away from heat. Self life:- one year in original unopened sealed condition.

Product Description: Structure Guard is ready to use free flow high strength cementitious material for repairing of beams, columns, and slabs. Applications: Suitable for repairs of slabs, columns and beams. Widely used in tunnel lining, foundaiton groutings etc. Advantages: Cohesive, flowing and self leveling. Non shrink, good bond, compact and dense, high strength etc. Forms good bond with old concrete. Direction For Use: Structure Guard should be used with 12% of water. Mix throughly in a bucket until it forms a mix of uniform and flowable consistency. The mixture is ready to use. Mix only as much quantity until as can be consumed in about twenty to thirty minutes. Curing: Cure with water for 5 to 6 days. Storage and Shelf Life: Shelf life 6 months, stored in dry & cool place.

Brand : Constrochem

Packaging Size : 25 kg

Form : Powder

Product description:- heat guard contains highest quality of resins combined with insulating and reflective fillers. It is a bright white elastomeric coating having high reflectivity to sun rays, hence keeping interiors cool during hot summer months. It is suitable for use on all types of horizontal and vertical surfaces. Water based and ecofriendly coating. advantages: reflects and reduce the heat of sun rays. Uv protection characteristic. Keeps interiors cool-lesser energy costs. Greatly reduces thermal load on the surface. Waterproofs masonry surface. Good adhesion to almost all surfaces like concrete, tin sheet, a.c.sheets etc. High temperature resistance will not crack, peel or spall. Prevents growth of fungus, algae, mildew etc. Single component easy to use. installation: open the container and stir well. Apply by brush, roller or spray. Apply two or three coats. Maintain a minimum interval of 4-6 hours between successive coats. coverage: depends on the nature of the surface and number of coats. 10-12 sqmtrcoat on smooth surface. surface preparation & cleaning: clean the surface to remove dirt, loose particles, flaking paint, etc. In case of steel surfaces, remove all scales, rust and grease. Examine the surface closely for any cracks or openings. Fill cracks with crack filling material. packing: 20kg. storage: store in cool, dry place away from direct sunlight. first aid measures: skin contact: wash immediately with soap and water thoroughly. inhalation: move to open air. contact with eyes: wash immediately under running water.

Packaging Size : 25 kg bag

Brand : Constrochem India pvt ltd

Form : Solid

Country of Origin : Made in India

Packaging Size : 25 L

Packaging Type : Bucket

Country of Origin : Made in India

We are offering construction grouts. Product description: it is a blend of cement and chemical additives which controls expansion in the plastic state & minimizing water demand. Low water states high early strength. concrete made by using ordinary portland cement will shrink on drying and therefore do not provide a firm grip to anchoring devices. This result in vibration in the equipment anchored to the concrete foundation leading to failure of the machine parts as well as the concrete foundations. Gubbi grouts are based on the expansive hydraulic setting binders which impart controlled expansion that ensures the permanent bond between the machine and the foundation.

Product Description:- A highly effective water-reducing agent & for free flowing concrete Uses: Concrete guard as a super plasticizer to produce flowing concrete in: RMC (Ready Mix Concrete) Beams and ceilings. Foundation. Bridges and cantilever structures. Walls and columns Pre-stressed concrete structures. Advantages: Up to 20%-25% water reduction.. Early demouldingdeshuttering. Increased water-tightness. It increases the strength. High strength after 8 hours. Appearance(Color): Brown Liquid Packaging: 220kg, 30kg. Storage ConditionShelf-Life: Store in a cool & dry place. One year in original unopened sealed condition. TechnicalData: Chemical Base - Modified polycarboxylate ether. Dosage:- 300-750ml per bag of 50kg cement. Actual dosage to be finalized on the basis of site trials. CleaningofTools: Clean all tools and application equipment with water immediately after use. Health & SafetyInformation:- For information and advice on the safe handling, storage and disposal of chemical products, users shall refer to the most recent material safety data sheet containing physical, ecological, toxicological & other safety-related data.

We are offering aluminium powder. Product description: finely grind aluminium powder is used in very limited quantity (less than 0.5%) so that it reacts with active lime, and silica in base material to make the aeration, and swell the product, making it very light weight product. Dosage: for aac - 0.5 grams per m3 of mixed design. for alc - 410 grams per m3 of mixed design. Packaging: minimum 40 kg. Storage: condition of storage :- this product should store in cool and dry place, ventilation room, insulate fire, heat source, rain-proof, sunscreen. And must not together with water, acid-base, cement and so one these oxidant. storage temperature :- 15 celsius - 25 celsius.