Modular Cleanrooms Dealers in Thane

Pharma Air Modular Systems Clean Room Partitioning System is designed for ease of installation and practical functionality, while maintaining modular flexibility to interchange by way of easy of demountability. Whether you are adding on, modifying an existing facility, or constructing a new facility, the Pharma air modular systems panel system offers materials to suit your specific application. The PAMS system can be integrated with a wide range of new or existing systems to coordinate any clean room facility or manufacturing environment. Simplified construction methods and our progressive/ non-progressive system will help minimise overall construction time. Solid Panels for Clean Room Partitions Pharma Air Modular Systems monoblock/modular solid partitioning walls are fabricated by way of nominal 2x1/0.8/1mm hot dipped galvanized steel sheets conforming to JISG 3302/94, LFQ, light chromated, zero spangle with a zinc coating of 120gsm. They are bonded with an infill of honeycomb paper core or high density mineral wool, forming a rigid 80mm thick panel to modular widths of 160mm to 1200mm and 2445mm to 6000mm in height. Pharma Air Modular Systems modular walls have been installed in clean rooms throughout the world in a range of applications from high technology electronic manufacturing to legislation-controlled healthcare packaging. The system is readily adaptable to meet the requirements of most clean room classifications as determined by PAMS grades used in pharmaceutical applications. Make-up panels are produced within the sizing layout of the drawing. Pre-treatment of panels is done by way of Corro-Zinc 97 and epoxy polyester powder coating of 60/80 microns forming a smooth surface finish. A complete range of partition walls and ceiling systems are available to meet the technical specifications of controlled environment rooms. Ceilings as well as partitions are inert, non particle-shedding, forming part of a clean room aseptic envelope to enable compliance with FDA validation procedures and PAMS standards. Full details of the complementary range of ceiling systems are available on request.   Metal DoorsetsMetal doorsets are manufactured from prime quality stretched cold formed steel sheet to ASTM A527 ASTM A525, JISG 3302/1994, BS 2989. Door frames are pressed from 1.5 mm thick galvanized steel sheet with mitred and welded construction.Hinge reinforcements for either 1 pair or 11/2 pair of hinges are manufactured from 4mm thick steel plate and welded to the frame.The door leaf is manufactured from 0.8/1mm thick galvanized steel sheet with lock formed edges. It is insulated and bonded with infill of honeycombed paper core/mineral wool, forming a rigid flush-fitting stress-free level leaf that will withstand high levels of duty without failure.Innovative flush double glazed 400x800mm vision panels are available, constructed with vacuum-sealed 6mm clear toughened glazing units. Finished in polyester powder coating of 60/80 microns forming a smooth surface finish.   Metal Type Electro Galvanized Steel, EG (Pure Zn, ASTM A591) Galvannealed Steel (with A60 Zinc Coating conformation to ASTM A25) Cold Rolled Steel (ASTM 366-91) Stainless Steel (Type 304 stainless steel,# 4 finish PVC coated)

Clean Room System, Aluminium Profile System, Modular Assembly System