Oil Pump Dealers

Oil Free Vacuum Pump  Diaphragm Type We have hired team of professionals who make sure that the material, required for manufacturing products, is of high quality standards and sourced from the trusted places only. We ensure that the packing of the products remain intact and there will be zero damage while handling, warehousing and transit. For this, we make use of high quality packaging material. Salient Features : No Lubrication required Noiseless Performance Absolutely Portable Totally Oil-free construction Practically maintenance free All parts made from special graded Aluminum die cast material for light weight and good strength Diaphragms are made of special 2-Ply Nylon reinforced neophrene rubber Special diaphragms available (TEFLON/VITON etc.) Value made of SS 316 material Built in micro suction filter Extra large bearings for trouble free and smooth running Pumps available with single as well as 3-phase motors Pumps available with flame proof motor Pumps available with 12/24V/48 Volts DC Pumps available with Chemical resistive parts (PP, TEFLON contact parts) (CRP suffixed models) Pumps available with SS 316 contact parts Pumps available in 110 V AC motors Ideally suited for original equipment manufacturers Application for use as Vacuum Pump : Laboratories                     Pollution Control Equipments             Material Handling Equipments             Labeling Machine                 De Soldering Station                 Glass forming                     Medical Instruments                 Dentists                     Chemical analyzers                 Gas Charging in A/c                 Suction machine         Photographic developing machines Application for use as Compressor : Agitation of chemicals in electro-plating Agitation of film in drying tank Wave Soldering machines for forming of flux Cement aeration Oil Free Spray painting Artist Air brush Operating small pneumatic tools Laminating press Nebuliser Plastic Welding

Oil Free Diaphragm Type Vacuum Pressure Pump these are 100 % oil free, where in not even a single drop of oil is used and are a boon for vacuum & pressure applications, where even slightest environment contamination through oil mist is forbidden. Also available with internal parts PTFE coated 7 complete polypropylene contact part  Features : » No Lubrication required» Practically maintenance-free» Diaphragms are made of special 2-Ply Nylon reinforced neophrene rubber» Special diaphragms available (TEFLON / VITON etc.)» Value made of SS 316 material» Pumps available with single as well as 3-phase motors» Pumps available with flame proof motor» Pumps available in 110 V AC motors Specifications : » Max. Vacuum: 650mmHg» Max. Flow Rate: 20L/min (100V,110V/60Hz), 17L/min (220V/50Hz)» Motor Rotation: 1700 RPM (110V,110V/60Hz), 1450RPM (220V/50Hz)» Horse Power: 1/8 HP» Pole: 4P» Gross Wt: 11.24lbs/5.1kg» Port Thread: 5/16"» Noise Level: ~50dB

Minivac SVL series of vacuum pumps compressors are oil lubricated rotary vane type direct or V-belt driven vacuum pumps mounted on common base frame. These are specially designed to give vacuum and pressure simultaneously. Specially treated fibre vanes steel vane give the advantages of silent operation and absolutely negligible wear on any friction affected contact parts resulting in increasing the life of pump. The regulation of vacuum and pressure can be precisely adjusted to suit to any requirement.

A small amount of fresh oil is continuously injected in the internals for lubrication and sealing by an independent force feed oil pump. This oil is discharged from the exhaust of the pump along with process vapors non condensables. Since fresh oil is continuously injected and contaminated oil is continuously discharged with the vapors, there is absolutely no drop in vacuum through out the process. This will result in lowered operating temperatures and substantially reduced batch durations. The oil consumption varies from 300 mlhour to 450 mlhour depending on the model capacity of the pump.

Dry running rotary vane pumps offer the ideal solution for a wide range of application, from paper handling and electronics to environmental technology. These rotary vane pumps are environmentally friendly, highly efficient, vibration free and extremely reliable. Service access is easy.

We offer Thermic Fluid Pumps. These are single stage end suction back pull-out type centrifugal pumps with following specifications:Back pull out design enabling easier removal for inspection and maintenance, Versatile shaft sealing arrangement glands packing as a standard arrangement and option to use mechanical seal.

We are pleased to introduce HACO LUB motorized barrel pump, one of the best performing barrel and container pumps in the world. HACO LUB is manufactured in mild steel with a sealless construction making its use versatile for handling wide range of lubricants and chemicals.

  Thermic Fluid Centerline Mounted High Temperature Pump     Leveraging on our sound quality control , good infrastructure and efficient workforce, we are able to serve our clients with a quality range of Thermic Fluid Centerline Mounted High Temperature Pump. Maxiumum pumping Temperature is 400 degree centigrade.This pump are offered in both water cooled and fan coolled design . It is Manufactured using high Temperature special alloy castings and is suitable for the circulation of High Temperature thermic fluid oil.This are also used for low vaccum and High Temperature distillation units. This product range is in compliance with ISO 2858 standards and finds extensive usage in textile, rubber , oil ,refinieries & chemical industries.   Thermic Fluid Centerline Mounted High Temperature Pump Series FCP - K1 ( HT) Leveraging on our sound quality control , good infrastructure and efficient workforce, we are able to serve our clients with a quality range of Thermic Fluid Centerline Mounted High Temperature Pump. Maxiumum pumping Temperature is 400 degree centigrade.This pump are offered in both water cooled and fan coolled design . It is Manufactured using high Temperature special alloy castings and is suitable for the circulation of High Temperature thermic fluid oil.This are also used for low vaccum and High Temperature distillation units. This product range is in compliance with ISO 2858 standards and finds extensive usage in textile, rubber , oil ,refinieries & chemical industries.  

GM High Pressure Oil Injector Pump GM IP - series manufactured byGM Group is designed to operate up to 3000 kg/cm2 giving adequate pressure for all normal dismounting applications.System: The pressure required to dismount bearing assemblies is 200 to 500 kg/cm2 range; and for torque-transmission joints is 800 to 1800 kg/cm2 range. In optional case the pressure required is 2500 to 3000 kg/cm2 is required. Field of Use: This System has a variety of applications; from small components to extremely large ones with cylindrical or taper seats. It is widely used for mounting and dismounting components with interference fits which are transmitting large fluctuating loads, such as gears, flywheels, crankshafts, couplings and bearings. Mounting and Dismounting:Oil Injection System is the only method of mounting and dismounting for shrunk fit components without damage. The mounting and dismounting force is reduced, or almost eliminated, by using the oil injection method.

Thermic Fluid Heater is an industrial heating equipment, used where only heat transfers are desired instead of pressure. This system is forced circulation fully automatic thermic fluid heater where a thermic fluid is circulated in a closed loop through heater and user equipment circuit where heat is dissipated to process.

Pumping speed from 300 l/s to 32000 l/s Operating pressure from 0.1 torr to 10 -7 torr MOC-SS Minimal back migration of oil vapours Long life of aluminium casting heater Extremely low wear and tear Low maintenance cost.

We make available premium grade Oil Sealed Rotary High Vacuum Pumps having high quality manufacturing. Owing to our reliable transportation amenities, we are capable to deliver the placed orders within the given timeframe and at the right place. Our organization is a one-stop stop and the best destination for acquiring superiority guaranteed Oil Sealed Rotary High Vacuum Pump.

We are offering an excellent range of Thermic Fluid Pump with motor assembly. We manufacture, export and supply Thermic Fluid Pump in standard as well as customized sizes. Our Thermic Fluid Pump is fabricated from high grade raw materials that assure for robust construction and high strength. The Thermic Fluid Pump is widely used in oil refineries, paper, food, chemical, textile industries and sea water desalination plants.Features : Low maintenance Easy to operate Longer service life

  Transformer Oil Pumps - Traction Duty :-         The pump and driving motor are assembled as a single unit on a common shaft. The transformer Oil circulates through the windings thus eliminating cooling fan, shaft seal and avoiding the danger of oil leakage or emtry of air. The complete unit is weather proof and can be arranged for horizontal or vertical mounting. Lubrication of the bearings and cooling of the motor windings is achieved with the circulated transformer oil. This results in a very efficient rate of cooling of the motor windings with minimum re-circulation losses and maximum utilization of available motor power.               Flowwell pumps & Meters are the market leaders for the manufacture of glandle / Axial flow pumpsets & other transformer oil pumps. Flow Well have attained high degree of quality levels for their products making then comparatively eqyivalent international standards like IS, BS, DIN, API.         Applications :-           Emu's including AC Emu's Electric locomotives including 3 phase locomotives Power Transmission, Distribution, furnace and Rectifier Transformers         Salients Features :-           Weather Proof Compact Design Glandless Design Self Lubricating

Hand Pump with Oil Tank, Clamp Band Support Ring, Spin on Filter

Oil Ring Vacuum Pumps, Water Ring, Diaphragm Vacuum Pump