Wire Machinery Dealers in Thane

Specifications: Max cutting capacity: up to 10m3/hr (only cutting time, not incl the time for transport of molds). Electric power: 380-400V/ 50Hz/3 phases (other electric power resourses are available on request) Very special electric geared motor for driving the cutting frame: capacity 0,35 kW Geared motors to drive the cutting wires capacity of 1.1kW and 1,5 kW Cutting frame guiding tubes: 4 very strong high quality alloy steel, chrome plated, with strong bushing and seals, life time guaranted Control board: mounted on the side of the machine, with all control and operation buttons, emergency safety stop button,… for controlling all the cutting operation speed of of cutting wires frame. Electric alarm, lighting switch, etc. All electrical & electronic components are from famous brand suppliers like Omron, LG, Schneider, to allow the operator to control the cutting process very easy at convenience Cutting mode: automatic / semi-auto/ manual Size of the mass concrete block before cutting: approx. 1220x1210x 400/500/600mm (height of brick depends on the buyer- options) Size of the bricks: nominal standard sizes 10x20x(40/50/ 60cm), tolerance max 2mm. Other sizes available on request (for ex 7.5 /15 x 20 x 60cm)

We hold expertise in manufacturing and exporting Traverse, which is driven by a AC geared motor. This unit is designed and developed using advanced technology in compliance with industry norms and standards. Our Traverse unit is used for the variety of positioning and reciprocating linear motion operation. Specifications: Reel sizes up to 4000mm flange , both on pay-off and take up possible Any number of taping heads possible Any number /size of filler bobbins possible Machine can be suited for armoring of wires / strips-upto any number Machine can be suited for manufacturing Telecommunication cables - super units with concentric and oscillating heads Laid up telecommunication cables

Specifications: Max cutting capacity: up to 10m3/hr (only cutting time, not incl the time for transport of molds). Electric power: 380-400V/ 50Hz/3 phases (other electric power resourses are available on request) Very special electric geared motor for driving the cutting frame: capacity 0,35 kW Geared motors to drive the cutting wires capacity of 1.1kW and 1,5 kW Cutting frame guiding tubes: 4 very strong high quality alloy steel, chrome plated, with strong bushing and seals, life time guaranted Control board: mounted on the side of the machine, with all control and operation buttons, emergency safety stop button,… for controlling all the cutting operation speed of of cutting wires frame. Electric alarm, lighting switch, etc. All electrical & electronic components are from famous brand suppliers like Omron, LG, Schneider, to allow the operator to control the cutting process very easy at convenience Cutting mode: automatic / semi-auto/ manual Size of the mass concrete block before cutting: approx. 1220x1210x 400/500/600mm (height of brick depends on the buyer- options) Size of the bricks: nominal standard sizes 10x20x(40/50/ 60cm), tolerance max 2mm. Other sizes available on request (for ex 7.5 /15 x 20 x 60cm)

Specifications: Max cutting capacity: up to 10m3/hr (only cutting time, not incl the time for transport of molds). Electric power: 380-400V/ 50Hz/3 phases (other electric power resourses are available on request) Very special electric geared motor for driving the cutting frame:capacity 0,35 kW Geared motors to drive the cutting wires capacity of 1.1kW and 1,5 kW Cutting frame guiding tubes: 4 very strong high quality alloy steel, chrome plated, with strong bushing and seals, life time guaranted Control board: mounted on the side of the machine, with all control and operation buttons, emergency safety stop button,… for controlling all the cutting operation speed of of cutting wires frame. Electric alarm, lighting switch, etc. All electrical & electronic components are from famous brand suppliers like Omron, LG, Schneider, to allow the operator to control the cutting process very easy at convenience Cutting mode: automatic / semi-auto/ manual Size of the mass concrete block before cutting: approx. 1220x1210x 400/500/600mm (height of brick depends on the buyer- options) Size of the bricks: nominal standard sizes 10x20x(40/50/ 60cm), tolerance max 2mm. Other sizes available on request (for ex 7.5 /15 x 20 x 60cm)

Al       1.2mm to 0.36mm   Cu       0.9mm to 0.12mm   GI - SS 0.8mm to 0.12mm      

We are offering wire cutting machine. Specifications: machine massif dimension (hlw): 2000*2000*1950mm or machine size depends on mold cover size size of total mold block (lwh): 1200*1200*625 or 850mm material required: only fly ash cement blocks can be cut actual output: 8 to 10 hours or depend on casting operating mode: automatic operating time for machine : 3 to 5 min operating staff: 3 to 5 persons

Wire Drawing Man MachineryNew and Used Cable and Wire Manufacturing MachineryUsed wire rope Manufacturing Machinery 'As seen' or Fully Rebuilt/Refurbished to fully meet your requirement In addition, we provide a comprehensive wire rope machinery and wire drawing machinery installation service. We also offer a full refurbishment service for your wire rope manufacturing machinery and wire industries. Product Description Feature: Used for continuous finished drawing wire take-up and weathered steel wire coiling in the level direction of the bobbin.  

We are offering rollers bar drawing machine. Technical data: • rope sizer with 5 stages, four rollers bar drawing machine • materials : stainless steel fixed roll, • exterior : stainless steel constant temperature control double-table • voltage : 380v (or as per the buyer request) • speed (mmin.) a25 • variable frequency controller available if needed • infinitely variable tubular heaters

Fully Automatic Cutting and Jacket Stripping of Multi Core CablesModel No. RAE - Ser - 2 2) Fully Automatic Cutting and Jacket Stripping of Battery Cables Model No. RAE - Ser - 11 3) Cutting Machine - CTO 16 4) Stripping Fixture

The new ST730T meets all the requirements for a flexible wire processing machine. The graphical display with touch screen supports the user in the setup of the cable. The cable is illustrated exactly as programmed; setting up time is reduced to the max.   New with MicroCoax mode:   The electronics high resolution and the precise construction guarantees unachieved precision end allows stripping of small coaxial cables down to a conductor diameter of 0.1mm (AWG 38) ! In the MicoCoax mode, the resolution of the ST730T increases up to 1/1000mm (0.000 04 Inches) and the clamps closes smoother.   The ST730T is the first and unique machine on the market that is able to process such a wide range of coaxial cables!The handling is very easy: insert the cable and the sensor will start the stripping cycle. The ST730T strips the outer jacket, the shield as well as the dielectric within seconds very precisely.Set up times are practically eliminated because when selecting stored cable parameters the machine sets itself up. The job is further simplified through the build in counter and the ability of setting sequences. The intuitive operation allows for quick and reliable machine settings when changing to a different cable. Stripping parameters can be protected by selecting a password through authorized personnel.The stripping machine ST730T impresses, due to its high quality workmanship, longevity and guaranties the highest flexibility with sustained productivity!

Wire Drawing Equipment, Lubricant

Rotary Swaging Machine, Special Purpose Machines, Tube Straightenin

Wire Binding Machine, Wire Annealing Mach, PVC Wire Machine

Wire Polishing Machine, Tungsten Carbide Killing Roll

Drum Twister Type Laying up Machine, Construction Equipments, Taping Hea

Wire Making Machines, Cable Making Machine, Cable Making Machine

Binding Wire Making Machine, HB Wire Making Machin

Wire Drawing Machine for Aluminium, Stitching Wire Flattening Machin

Wire Winding Machines Wire Draw Machine, Coil, Wire Rop Machine, Gea

Bunching Machine, Rotating Caterpillar, Armouring Machin

Strip Machine, Alu Alu Packing Machin

Wire Drawing Machines, Enamel Wire Machine