Analog Input Module Dealers

Addressable Input/ Output Interface Addressable Input Interface: Feature     ☆Input interface for connecting non-addressable initialization device into GST intelligent system    ☆Small in size suitable to be inserted into back box    ☆Electronically addressed    ☆EOLR is used for cable monitoring of SC and OC    ☆Possible monitoring NO or NC dry contact input Technical Specifications     ☆Operation Voltage: 24VDC    ☆Operating Current: 1.5mA    ☆EOLR: 4k7 OHM    ☆Wiring: Non-polarized 2-core for loop          Non-polarized 2-core for contact input    ☆Operating Environment:          Temperature: -20℃ ～+55℃          Relative Humidity: 95%    ☆Dimension: 50mm×44mm×17mm   Addressable Output Interface: Feature     ☆Output interface for connecting non-addressable output device into GST intelligent system    ☆Small in size suitable to be inserted into back box    ☆Electronically addressed    ☆EOLR is used for cable monitoring of SC and OC Technical Specifications     ☆Operation Voltage: 24VDC Loop, 24VDC power supply    ☆Operating Current:           Standby Current: Loop 1mA, Power 1.5mA           Action Current: Loop 4mA, Power as per output current    ☆EOLR: 4k7 OHM    ☆Wiring: Polarized 2-core for loop          Polarized 2-core for power supply          Polarized 2-core for output    ☆Operating Environment:          Temperature: -20℃ +55℃          Relative Humidity: 95%    ☆Dimension: 50mm x 44mm x 17mm

The relay output module Remote IO Module ADAM-4060 is a cost effective alternative to SSR modules. It offers two relay channels, two of Form A and two of Form C. It excellently serves the ONOFF control or low-power switching applications. Salient features : 4 - channels relay, two Form A and two Form CBreakdown voltage : 500 VAC (5060 Hz) Insulation resistance : 1000 M ohms minimum at 500 V DC

Mitsubishi Melsec AX41C Input Module 32 Point This Mitsubishi AX41C Melsec-A Programmable Controller AX41C Configuration: Inputs: 36 Inputs Input Voltage: 1224 VDC.

Digital Input Digital Output Module Falcon DIDO24, Digital Input/output module with RS485 connectivity which is best suitable for SCADA. Digital Input/output module can also be used as slave module with PLC. Digital Input/output module use MODBUS RTU protocol for serial communication. RS485 serial port is provided to make the modules suitable for multi dropping application.Digital Inputs are optically isolated inputs and accepts potential free contact signals. Digital Input/output module can be used for sensing level switches,proximity switches, door switches, alarm/trip conditions in panel, pump/motor status, equipment status etc. Digital Outputs are optically isolated open collector outputs to drive external relay module. These outputs can be used to perform supervisory control actions like giving alarms, operating valves, switching ON/OFF pumps/motors etc.