Fan Silencers Dealers in Tiruchirappalli

Both suction and discharge silencers shall be supplied either in circular or rectangular construction for fan blower and turbo blowers. The rectangular silencer shall be of absorptive type installed either at suction side or at discharge side of fan blower. The internals of the silencer comprises a series of acoustic splitter elements arranged in parallel inside the rectangular steel casing. This would ensure the flow of airgases through the rectangular air gap between acoustics splitters and thus offering a minimum pressure drop. The leading and trailing edge of the acoustic splitters will be designed aerodynamically to offer minimum resistance to the flow medium.

Industrial Fan Silencers are installed depending on fan size, horse power, air flow, type and number of blades, static pressure, rotational speed etc. We are named among the renowned Manufacturers, Exporters and Suppliers of Industrial Fan Silencers. The manufacturing of these silencers is done using the latest techniques under the strict vigilance of experts. One can place retail as well as bulk orders for Industrial Fan Silencers with us. Details :Fan silencers usually require absorptive type design as they are well known for better attenuation in mid and high frequency range (500-8000 Hz). The effectiveness of absorption material progressively reduces at frequencies above and below this range. The noise control is achieved by means of absorption. The acoustic energy propagating through the silencer is effectively absorbed into the fibrous absorption material and converted into heat energy. These silencers generally employ straight thru design and have a low pressure drop as it imposes very little restriction to the flow. The fan silencers are normally selected on the basis of maximum allowable pressure drop at rated flow and the silencing criteria. These silencers are usually sized for around 5000 to 5500 FPM velocity but not exceeding 7500 FPM velocity to prevent excessive self-generated noise and aerodynamic noise generation. While selecting the fan silencer, it must be ensured that the flow area throughout the silencer is sufficient to accommodate the air flow without imposing excessive restriction. Data Required Air Flow Rate (Actual CMH) Temperature (°F) Pressure (PSIG) Maximum allowable pressure drop (inches of water) Existing noise frequency spectrum (63).

The fan silencer is used to reduce the suction and discharge noise of the fan. It is an absorptive type silencer and is very effective for high frequency noise attenuation. Consequently fan silencers shall be supplied in rectangular shape.The internal of fan silencer is constructed with series of rectangular baffle with aerodynamic design to offer minimum pressure drop. The following data are required to design fan silencer. Application Flow rate Temperature Fan inlet / outlet size (Depending on application) Allowable pressure drop Silenced noise level requirements

The construction of the fan silencer will be circular or rectangular type. The fan silencer shall be absorptive type silencer . We can install at suction or discharge side of the fan . It is very effective for high frequency noise attenuation.

Blower Fan Silencers, Suction and Discharge Silence

Fan & Blower Silencer, Stack & Bypass Stack Silencer, Start up Vent Silence

Fan- Blower Silencer, Start up Vent Silencer, Crude Moringa Seed Oi

Fan Silencer, Impeller Housing, Spiral Casing

FD Fan Silencer, Discharge Silencer for Blower, Steam Vent Silence

PA Fan Silencer, Sound Proof Cabin, Start up Vent Silence