Features
Thread Trimming Less 1 mm
Working Efficiency is 2~3 times than manual
Automatic Oil-lubrication
Energy-Saving more than 30%
Intelligent blade life will be 1~2 times than normal blade
Features
Thread Trimming Less 1 mm
Working Efficiency is 2~3 times than manual
Automatic Oil-lubrication
Energy-Saving more than 30%
Intelligent blade life will be 1~2 times than normal blade
Features
The machine achieves sewing speed of 3,200sti/min. The machine's starting, stopping, thread-trimming and automatic presser lifting speeds have been increased to significantly shorten total cycle time.
Features
The machine achieves sewing speed of 3,200sti/min. The machine's starting, stopping, thread-trimming and automatic presser lifting speeds have been increased to significantly shorten total cycle time.
Features
More space for coverstitch projects.
Threads pull easily when presser foot is up.
Reinforces, trims fabric, overlock and seams for great results.
You trim, stitch, overcast or embellish a wide variety of fabrics in half the time.
Features
More space for coverstitch projects.
Threads pull easily when presser foot is up.
Reinforces, trims fabric, overlock and seams for great results.
You trim, stitch, overcast or embellish a wide variety of fabrics in half the time.
Single Needle Lockstitch Computerized Direct Drive UBT Machine
Features
Fdm's direct-drive lockstitch machines have been evolving toward improved quality.
Now, the DDL Series line-up has been renewed by adding a "semi-dry head" type to make the DDL-9000A Series.
Single Needle Lockstitch Computerized Direct Drive UBT Machine
Features
Fdm's direct-drive lockstitch machines have been evolving toward improved quality.
Now, the DDL Series line-up has been renewed by adding a "semi-dry head" type to make the DDL-9000A Series.
Features
There is a reduction in the skill required in many operations involving fusing
compared with the sewing in of interlinings and this leads to a reduction in training time.
It is easier to achieve consistent quality in the lamination process than it is with many of the operations of sewing in of interlinings, especially on modern
Features
There is a reduction in the skill required in many operations involving fusing
compared with the sewing in of interlinings and this leads to a reduction in training time.
It is easier to achieve consistent quality in the lamination process than it is with many of the operations of sewing in of interlinings, especially on modern
Features
Free arm for sewing sleeves etc.
Number of threads - ideally a machine would have four threads.
Adjustable stitch length.
Retractable knife so you can move it out of the way and overlock without the knife cutting the fabric.
Features
Free arm for sewing sleeves etc.
Number of threads - ideally a machine would have four threads.
Adjustable stitch length.
Retractable knife so you can move it out of the way and overlock without the knife cutting the fabric.
Features
High sensitivity, easy to maintain
Specially has the protection circuit, it will auto-stop if no detection goods in 10 minutes
Has the switch function for B/C (supplementary material/product), adapt to detect different products
Can keep a long time to work, the efficiency can reach 100% when properly used
When detect the broken needle, or Fe, it will alarm by sound and light, the engine will stop and return to the start point, and then move automatically again.
Features
High sensitivity, easy to maintain
Specially has the protection circuit, it will auto-stop if no detection goods in 10 minutes
Has the switch function for B/C (supplementary material/product), adapt to detect different products
Can keep a long time to work, the efficiency can reach 100% when properly used
When detect the broken needle, or Fe, it will alarm by sound and light, the engine will stop and return to the start point, and then move automatically again.
Features
In cone winding m/c, reciprocating cams which are attached with the traversing guide and attached with a shaft.
Also cam controls the yarn with the yarn guide.
Here, cone are placed on the cone holder and kept on the contact of the drum.
A drum is in opposition of each cone.
Features
In cone winding m/c, reciprocating cams which are attached with the traversing guide and attached with a shaft.
Also cam controls the yarn with the yarn guide.
Here, cone are placed on the cone holder and kept on the contact of the drum.
A drum is in opposition of each cone.
Reviews & Ratings
Write a Review
Post Free Ad