Solid Contact Clarifiers Dealers

THE EIMCO-K.C.P. LTD Solids Contact Reactor Clarifiers are basically divided into two different classes HRC and HRB mechanisms.   HRC is the high rate column supported Reactor Clarifier of size ranging from 15m to 75m diameters. HRB is a high rate bridge mounted Reactor Clarifier supplied in sizes ranging from 3m to 25m diameters.   The high rate Solids-Contact Reactor Clarifier operates with the raw influent liquid being brought into immediate contact with a large circulating volume of relatively dense previously formed flocculate and precipitate. The mixture of raw influent liquid and re circulated slurry is sent upward into the reaction cone with 75-90% being returned to recirculation with the incoming raw water. The remaining 10-25 % passes under the cone and into the clarification zone. Once in the clarification zone, the solids settle to the tank floor with the clarified liquid moving into the effluent launder and exiting tank   The BFR and CF Reactor Clarifiers are applied to processes where longer detention times within the feed well and no solids recycle are necessary or requested by customer. The detention times are considerably longer than those offered by higher rate solids-contact units and are necessary for proper flocculation.

The high rate solid contact clarifier usually called as HRSCC is used mostly wherein the incoming load conditions vary. Much wide range of water qualities can be handled in the HRSCC Clarifier.  Application Colloidal Silica Removal Waste Water Treatment  Heavy Metal Recovery Advantages The solids contact type clarifier is a high rate water treating clarifier, which produces treated water of highest quality with minimum time, space and chemicals. Simple and straight forward operation requiring less operator attention and minimum maintenance Minimum building space requirements and building height clearances.

HRSCC uses turbulence and high velocity to reduce silica load in the water apart from deduction of suspended impurities and turbidity. HRSCC requires lesser area and process time and thereby, reduces the initial civil cost of the plant.

HRSCC is mostly used in applications wherein a large variation in the inlet conditions has to be tolerated by the system. After coagulation and/or flocculation in the sludge blanket units, the incoming water passes through the suspended layer of previously formed floc. "Solids-contact" refers to units in which large volumes of sludge are circulated internally. The term also describes the sludge blanket unit and simply means that prior to and during sedimentation the chemically treated water contacts previously coagulated solids. Solids-contact, slurry pool units do not rely on filtration as in sludge blanket designs. Bringing the incoming raw water into contact with re-circulated sludge improves the efficiency of the softening reactions and increases the size and density of the floc particles. ZION ENVIRO HRSCC are used in Silica Removal Heavy Metal Removal Primary treatment in ETP Pre Treatment for Re-cycling system With the range of 2.5 mᶟ/hr to 250 mᶟ/hr

High Rate Solid Contact Clarifier (HRSCC) is mostly used in applications wherein a large variation in the inlet conditions has to be tolerated by the system. High Rate Solid Contact Clarifier (HRSCC) produces an effluent of the highest quality in minimum time and space and using a minimum amount of chemicals.

High Rate Solid Contact Clarifier are the most popular clarifiers in field of water treatment. They are preferred more than any other clarifier because they can handle large flow rate and provide better effluent quality outlet than other clarifiers.

Its designed to handle turbidity and to remove suspended solids. These units have an ability to offer turbidity less than 50 NTU at the outlet of clarifier.Features : Constructed either in a steel tank /concrete basin A unique rotor-impeller combination has made it possible to control mixing and slurry recirculation to accommodate changes in water characteristics. Advantages : In HRSCC Flocculation, coagulation & settling processed in a single tank i.e. HRSCC Tank. It can accommodate a wide range of flow rates and solids variations. The unit produces a very dense sludge that minimizes sludge handling. Rapid sludge settling and thickening Minimizes dewatering equipments costs Minimum Operator attention. Application : Colour removal Primary treatment of waste water.

Techno High Rate Solids Contract reactor clarifiers have general application for Raw Water Treatment and for industrial process. Improved operating efficiencies keep operating costs to a minimum. Solid Contact Clarifier Water Treatment units effectively clarify and soften raw or process water for re-use.

THE EIMCO-K.C.P. LTD Solids Contact Reactor Clarifiers are basically divided into two different classes HRC and HRB mechanisms. HRC is the high rate column supported Reactor Clarifier of size ranging from 15m to 75m diameters. HRB is a high rate bridge mounted Reactor Clarifier supplied in sizes ranging from 3m to 25m diameters.

Fluid Systems Manufacture a Wide range of custom-built High Rate Solid Contact Clarifier – HRSCC in India for industrial process water applications, with inherent design to conserve water, and save costs.The High Rate Solid Contact Clarifier usually called as HRSCC is used mostly wherein the incoming load conditions vary. Much wider range of water qualities can be handled in the HRSCC Clarifier.The principle is based on mixing existing floc with the incoming effluent, to create a dense floc, which can be easily settled down HRSCC - Application Areas Colloidal Silica Removal Waste Water Treatment Heavy Metal Removal. Advantages of the HRSCC The solids contact type clarifier or HRSCC is a high rate water treating clarifier, which produces treated water of highest quality with minimum time, space and chemicals. In high rate solids contact type clarifier, coagulants and large quantities of recirculating sludge’s are thoroughly mixed and are retained in intimate contact for a prolonged period of time in the draft tube and cone sections of the solid clarifier. The tank and structural support design is completely self supporting for continuous service and compatible for supporting external loads such as walkways, ladders etc. Minimum building space requirements and building height clearances. Simple and straight forward operation requiring less operator attention and minimum maintenance.

     High Rate Solids Contact Clarifier is widely used for clarification of raw water and wastewater. Incorporates the design of internal solid recirculation thereby optimising the chemical consumption and making it more economical than conventional filter.

The design features of the solids contact type clarifier provide the three zones necessary for proper clarification: Rapid mix zone, where raw water, recirculated precipitates and fresh reagents are rapidly mixed together. Slow mix zone,where gentle mixing permits floc formation and brings the floc into intimate contact with the suspended impurities.

Our company is reckoned amongst the trustworthy providers of an unmatched range of High Rate Solid Contact Clarifier. Our clarifier is a high rate recirculation type clarifier that is used for the purpose of clarification, silica reduction, lime softening or organics reduction of water and wastewaters containing suspended solids, color and higher clarified water quality. It also increases the over flow.

Solid Contact Clarifier, Surface Aerator, Clarifloculator, Oil Skimme

High Rate Solid Contact Clarifier, Resin Beads, Lamella Clarifie

High Rate Solids Contact Clarifier, Reverse Osmosis Equipmen

High Rate Solid Contact Clarifier, Inclined Plate Clarifie

High Rate Solids Contact Clarifier, Dosing Systems, Degasser Towe

High Rate Solid Contact Clarifier, Membrane Bio Reactor, MBBR Medi

High Rate Solid Contact Clarifier, Erection Crash Barrier, Tube Settle

High Rate Solid Contact Clarifiers, Vibrating Fork Type Level Switche

High Rate Solid Contact Clarifies, Commercial Water Purifie

High Rate Solids Contact Clarifier, Rain Water Harvestin

High Rate Solid Contact Clarifier, TDS Adjuste

High Rate Solids Contact Clarifier, Lamella Clarifier