Analog Input Module Dealers

Digital Input Digital Output Module Falcon DIDO24, Digital Input/output module with RS485 connectivity which is best suitable for SCADA. Digital Input/output module can also be used as slave module with PLC. Digital Input/output module use MODBUS RTU protocol for serial communication. RS485 serial port is provided to make the modules suitable for multi dropping application.Digital Inputs are optically isolated inputs and accepts potential free contact signals. Digital Input/output module can be used for sensing level switches,proximity switches, door switches, alarm/trip conditions in panel, pump/motor status, equipment status etc. Digital Outputs are optically isolated open collector outputs to drive external relay module. These outputs can be used to perform supervisory control actions like giving alarms, operating valves, switching ON/OFF pumps/motors etc.

Delta DVP06AD-S Model: DVP06AD-S Voltage: 24 V DC 2W  Type: Analog input module, 6 AI

Radix Analog Input Modules are cost-effective and versatile in PLC applications. They can also be used directly with SCADA applications without the use of a PLC. Another application is to use these as a Remote I/O in PLC systems. In large Data Acquisition Systems, these Analog Inputs Modules will cost a fraction of the PLC Analog Input Modules. SCM201 has 8 channels without channel-to-channel isolation, and SCM211 has 4 channels with channel-to-channel isolation of 300 VAC. Each channel is universal, and can be user configured for a variety of RTD, thermocouple, voltage and current inputs. These Modules feature exceptionally good performance parameters; a typical accuracy of 0.1%, and baud rates up to 57.6 kHz.

Easy to use – simple plug in/out design Two RJ45 inputs and four RCA outputs Metal enclosure with rack mount handle Black finish

Addressable Input/ Output Interface Addressable Input Interface: Feature     ☆Input interface for connecting non-addressable initialization device into GST intelligent system    ☆Small in size suitable to be inserted into back box    ☆Electronically addressed    ☆EOLR is used for cable monitoring of SC and OC    ☆Possible monitoring NO or NC dry contact input Technical Specifications     ☆Operation Voltage: 24VDC    ☆Operating Current: 1.5mA    ☆EOLR: 4k7 OHM    ☆Wiring: Non-polarized 2-core for loop          Non-polarized 2-core for contact input    ☆Operating Environment:          Temperature: -20℃ ～+55℃          Relative Humidity: 95%    ☆Dimension: 50mm×44mm×17mm   Addressable Output Interface: Feature     ☆Output interface for connecting non-addressable output device into GST intelligent system    ☆Small in size suitable to be inserted into back box    ☆Electronically addressed    ☆EOLR is used for cable monitoring of SC and OC Technical Specifications     ☆Operation Voltage: 24VDC Loop, 24VDC power supply    ☆Operating Current:           Standby Current: Loop 1mA, Power 1.5mA           Action Current: Loop 4mA, Power as per output current    ☆EOLR: 4k7 OHM    ☆Wiring: Polarized 2-core for loop          Polarized 2-core for power supply          Polarized 2-core for output    ☆Operating Environment:          Temperature: -20℃ +55℃          Relative Humidity: 95%    ☆Dimension: 50mm x 44mm x 17mm