Back Back
Air Blower
Get Price Quote
We are offering industrial centrifugal blowers are designed for varied applications in the field of air pollution control and ventilation. centrifugal blower comprise a range of 16 different model types with air handling capacities of up to 1,50,000 m3 hr and pressures up to 1500 mm water column. Special types of blowers to handle higher air volumes and pressures can also be supplied on request. These blowers are normally are ms welded construction, however, they can also be made out of stainless steel or any other workable material to suite the specified applications. The impeller blade profiles are of various types to suite the medium handled and the application as described and illustrated below. The impeller of the centrifugal blower is statically and dynamically balanced prior to assembly. * backward curved blades * stationary inlet guide vanes * direct driven fans * in many configurations
Air Fin Coolers
Get Price Quote
1 Piece (MOQ)
Our company is enagaged in manufacturing, exporting & supplying of Air Fin Coolers. Air Fin Coolers is used to exchange the Heat between Air/Gas on one side & Air/Gas/liquid on other side. We use External Fins in the Air Fin Coolers to increase the heat transfer area. The fins are selected on the basis of parameters like fouling nature of the air/gas, air/gas to be cooled, available area, etc. The common types of fins are : Integral Fin The Tubes are finned on the OD of the Tube This increases the Heat Transfer Area of the Tube by 3 to 3.5 Times as compared to Plain Tube, with a minor increase in the cost These Tubes find applications in the AC Plants/Oil Cooler, Condensers, etc. Carbon Steel, Stainless Steel, Copper, Copper Alloys can be finned L Type Fins The aluminium strip foot section is first formed into an L shape and then tension wrapped on to the base tube Wound fin base sections are close to each other so as ensure a continuous cover over the primary tube surface Finally, the fin strip is fastened at ends to prevent loosening Plate Fin Plate Fin generally consist of a thin strip of either aluminium, Galvanized Iron, Copper etc which is slipped over the OD of the Tube Necessary operation is done to ensure proper contact between the OD of the Tube and Tube Hole ID of the Plate Fin The Pitch of the Holes in Fin is accordingly to the Tube Layout of the Tube Sheet G Type Fins The aluminium strip foot section is first formed into an L shape and which is tension wrapped and embedded into the primary tube wall These type of tubes have better life vis a vis the L type of Fins find applications in Refineries Spiral Tension Wound Tubes Here Plate Fin is tension wound spirally on the od of the tube, ensuring proper contact between the OD of the Tube & Plat Fin Plate Fin material can be Aluminium, Carbon Steel, Copper, while Tube material can be Carbon Steel, Stainless Steel, Copper, Copper Alloys, etc.
Best Deals from AIR Conditioning System
Brine Chilling Plant
Get Price Quote
Brine Chilling Plant are used for producing and maintaining Chilled Brine through refrigeration process. Brine is a thermal fluid, which is a liquid or a mixture of liquid with plain water, which remains in liquid state even in sub-zero temperatures without freezing.We are proficient in designing and engineering Brine Chilling Systems up to minus 40°C. We design and engineer Brine Chillers in ready-to-use packages as well as on-site installations as per the application requirements. Brine Chillers are industry specific and are to be designed as per application requirements.Salient Features User Friendly Automatic Operation Power saving compressor with high energy efficient ratio. Easy to integrate into existing plant. Minimum floor space required. High efficiency evaporators. High efficiency shell & tube type condenser. Manufactured accordingly to the safety regulations Prompt after sales service. Powder coated steel cabinet.
Fan Coil Unit
Get Price Quote
The offered lot is in complete compliance with the industry standards thus, high in demand. As we know the value of quality raw materials, we source them only from dependable vendors. By applying such inputs, we make sure that our finished goods remain flawless.
4 Inch Cooling Fan 230V AC
220 - 240 Per Nos
40 Piece (MOQ)
polycarbonate louvers
Get Price Quote
EXPORTERS, MANUFACTURERS, SUPPLIERS OF POLYCARBONATE LOUVERS FROM VADODARA, GUJARAT (INDIA) We are exporters, manufacturers, suppliers of Polycarbonate Louvers. The Polycarbonate Louvers is specially designed in such a way that the air flow and light ventilation is in good state.
Water Chiller
Get Price Quote
As per the day by day changing requirements of the customers, we are involved in offering best quality of water chiller. Water chiller is manufactured by using good quality material that we procured from the reliable vendors of the market. Water chiller is available 1tr to 5tr in the market at reasonable rate.
Hot Water Generator
Get Price Quote
Features……. Compact skid mounted system including tank, thermoject-steam injectors, all required inlet/outlet circulating nozzles and automated with complete steam control instrumentation. Steam is injected using thermoject-steam injectors thereby ensuring zero steam losses, 100% energy utilisation and high energy efficiency due to utilisation of total heat of steam. Temperature based PID controlled steam control valve ensures instantaneous and continous hot water generation and supply with accurate required temperatures. Easy to install as system is supplied completely preassembled and skid mounted. System custom desi Indirect Heating As the name indicates, in this type of heating, the steam does not come in direct contact with the water to be heated. This type of heating prevents contamination of the water due to steam mixing as in case of direct heating and is used widely in industries where process does not permit such contamination. It is widely used in industry because it provides rapid, even heating. This method uses a heat exchanger, either PHE or shell & tube type, to heat the water Features……. Package consists of heat exchanger, interconnecting piping, control instrumentation, pumping traps & required valves and buffer tank. Total system is skid mounted and compact thereby requiring significantly lesser space than traditional tank based hot water systems. Buffer tank provided enables the system to be used online in recirculating type hot water circuits. Efficiently designed heat exchangers and temperature based control instrumentation including control valves enable the availability of hot water instantenously, continuously and at accurate temperatures as required. Temperature based PID control enables variable temperature settings and stability of settings at variable loads. For non critical applications, economic versions with on/off control valves & thermodynamic steam trap at condensate outlet can also be provided. MWHS can be provided with both plate heat exchangers or shell & tube type heat exchangers based on customer preference. Package includes pumping trap provided at the condensate outlet of the heat exchanger thereby ensuring zero damage to the heat exchanger under stalling conditions and long working life of the heat exchangers. MWHS is a High energy efficient solution for hot water generation. 100% energy utilisation takes place as system is provided complete with steam operated condensate return pump. A consolidated experience of more than 30 years in the field of heat transfer technology provides you the MWHS- the modular hot water heating systems.
Oil Chiller
Get Price Quote
We are offering Oil Chiller 1 TON TO 10 TON CAP.
cold chamber
180,000 Per Piece
1 Unit (MOQ)
cold chamber is use for material testing , wethore testing etc .
Air Chillers
Get Price Quote
Air chillers are used when the air is required at a temperature that is below the ambient temperature. The air chiller cools compressed air to a temperature of +5 °C economically without applying CO2 or N2. It is used in cooling and maintaining temperature of output product from machines, providing cold air to processes, laboratory etc.
Industrial Dampers
45,000 Per Piece
02 Piece (MOQ)
Water Chillers
Get Price Quote
Air Conditioning Bracket
250 Per UNIT
Mushroom Diffuser
12 - 15 Per Piece
5000 Piece(s) (MOQ)
sand trap louvers
Get Price Quote
Manufactured from high quality extruded aluminium profiles with the advantages of corrosion resistance and rigidity. Composed two sets of inverted U - channels mounted vertically on two opposite rows. Drain holes of diameter 20 mm are provided in two rows at the bottom of the louver for emptying filtered sand and dust. Fixed with a removable volume control damper to ensure positive control over the fresh air stream. Damper can be operated manually from the back of the louver or can be motor operated. Designed to separate and and dust from the air stream. Generally used for ventilation applications and at inlet duct of air handling unit. Standard Finishes Natural anodized aluminium finish. Powder coated color finish as per RAL color codes. Flexibility of finishing available as option. Standard Sizes Available in square and rectangular sizes. All combinations of width x height. Non standard sizes are available. Construction Frame and blades: 1.5 mm and 1.2 mm thick high quality extruded aluminium profiles. Bird screen: 12 mm x 12 mm x 1.5 mm dia aluminium wire mesh as standard. 12 mm x 12 mm x 1 mm dia G.I wire mesh as optional.
Industrial Milk Chiller
155,000 Per Piece
Stainless Steel Lab Condenser
7,500 Per Piece
Single Deflection Grilles
Get Price Quote
Our clients can avail single deflection grills that are manufactured using high grade raw material, which is stringently tested before using the same for the manufacturing process. These are highly suitable for duct ceiling, and side wall applications as the grills are highly durable and are available at the competitive prices. Manufactured in high quality aluminium extrusion profiles Grilles are suitable for duct ceiling, and side wall application Horizontal deflection blades are adjustable by manually Designed with nylon bushes for efficient and smooth operation With or without opposite blade damper
Air Blower
Get Price Quote
We are a leading manufacturers and suppliers of Air Blowers. We provide high quality industrial Centrifugal Air Blowers for various applications such as dust collection, material conveying, fume extraction, drying, ventilation purpose, cooling etc. We have carved a niche as the booming centrifugal blowers manufacturer in India. We offer our client a wide spectrum of Blowers. We manufacture this product in relevance with quality grade raw materials. These products are fabricated according to the specification and requirements of the clients. Employed with the exertion of advance technology and latest machinery,in conformation with international quality norms, the rendered product range is highly preferred all over the world.
Industrial Air Diffusers
Get Price Quote
We are a well-known Manufacturer and Supplier of the finest quality Industrial Air Diffusers. Industrial Air Diffusers, offered by us, are made with qualitative raw materials and processed with the employment of cutting edge technology. The Industrial Air Diffusers are robust and have high strength. Avail Industrial Air Diffusers from us at the market leading prices. Features : SturdyLongevityEconomical Ease of installation
Industrial Louvers
Get Price Quote
Offering a wide gamut of industrial louvers which are angular made and allow light and air to come keep away rain, direct sunshine and noise. Louver is commonly used in outside of pipe lined cover because it looks good for elevation. We hold expertise in this field, by offering to our valuable clients a premium range of Ventilation Louver. Our provided Louver is made available in diverse customized options in accordance with the customer’s choice. This Louver is designed using best quality material and modern techniques as per the market trends. Offered Louver is use in commercial Louver wall and window applications.
Steam Gland Condenser
1,200,000 Per Piece
Sensors
Get Price Quote
Air Blower
Get Price Quote
We manufacture and supply Air Blower .
Pressure Damper
Get Price Quote
ROTARY Drum Sand Cooler
Get Price Quote
The almost ZERO maintenance equipment for cooling HOT return sand after Shake-out for small-medium-large foundries. BMM make ROTARY Drum Sand Cooler is the most efficient & serving successfully to the foundry industry from many decades. Its robust & durable construction helps the foundries to go on using for years to come without any break down. It also helps in homogenous the sand during the transit inside the drum chamber.
Crompton Greaves AC Motor
5,800 Per Piece
Air Diffuser Spring
Get Price Quote
Gland Steam Condenser
500,000 Per Units
Filter by Localities
