Ambicaflex Technology Ranoli, Vadodara, Gujarat

AMBICAFLEX Strip wound interlock hose is a high-quality, general purpose hose construct from a single strip of metal that is profiled and interlocked itself. The interlocked section of strips is able to slide back and forth, providing ability to flex.   1. STRIP WOUND INTERLOCK HOSE WITH PACKING   a. CONSTRUCTION MATERIAL: Electro-Galvanized Steel Stainless Steel 304 Stainless Steel 316 Copper Aluminium b. PACKING OPTION Asbestos Metal Fiber c. APPLICATION: As suction pressure hose for oil, steam, water, liquid chemicals and liquid gases etc. Loading unloading liquids from trailers and railway wagon For transportation of food grains and   a. CONSTRUCTION MATERIAL: Electro-Galvanized Steel Stainless Steel 304 Stainless Steel 316 Copper Aluminium b. APPLICATION: High-temperature ducting Hot air blower hose Bulk transfer of abrasive material Dust collection equipment Transportation of bulk solid lick grain, raise etc. From ship to port platforms As outer jacket for insulated pipe line As exhaust hose for hot air, fumes and gases.

stainless steel corrugated hose construct from stainless steel strip that is rolled and the edges welded together to form a thin-walled, gas-tight tube. After the tube has been welded, corrugations are formed into the tube to make it flexible. Corrugations are formed into the tube either mechanically or hydraulically (Hydro forming).

1. CONSTRUCTION AMBICAFLEX stainless steel corrugated hose construct from stainless steel strip that is rolled and the edges welded together to form a thin-walled, gas-tight tube. After the tube has been welded, corrugations are formed into the tube to make it flexible. Corrugations are formed into the tube either mechanically or hydraulically (Hydro forming). 2. CORRUGATION PROFILE There are two corrugation profiles, annular and helical. a. ANNULAR PROFILE   In the Annular Profile Independent corrugations, straight and parallel. b. HELICAL PROFILE   In the Helical Profile One continuous corrugation that spirals around the hose 3. WIRE BRAIDING To give corrugated hose the ability to withstand pressure, stainless steel wire is braided over the hose. Hoses may be single braided (one layer of braid) or double braided (two layers of braid) to achieve even greater working pressures. Braided braid is used on large-diameter hose. Designing the proper braid for each type of corrugated hose requires sophisticated engineering to maintain the proper balance between the braid strength and the hose’s flexibility.   4. CONSTRUCTION MATERIAL OF HOSE Stainless Steel 304 Stainless Steel 316L 5. CONSTRUCTION MATERIAL OF WIRE BRAIDING Stainless Steel 304 6. APPLICATION As suction and discharge pressure hose for oil, steam, liquids, chemical and liquid gases etc. Suitable for Petrochemical, Chemicals, Pharmaceutical, Food, beverages, Oil and Gas etc. industry. As a vibration absorber for pipeline As pump connector at inlet and outlet side of pump installation As loading and unloading hose for liquid bulk transfer by truck and storage terminals 7. ANUULAR CORRUGATED HOSE SPECIFICATION

Strip wound interlock hose is a high-quality, general purpose hose construct from a single strip of metal that is profiled and interlocked itself. The interlocked section of strips is able to slide back and forth, providing ability to flex.

AMBICAFLEX exhaust hose is line of manufacturing strip wound interlock hose without packing for automotive or industrial exhaust system. AMBICAFLEX have exclusively manufacture exhaust hose with added flexibility, highly durable and absorb have vibration exclusively for exhaust application in various industry. TYPE   1. CONTRUCTION MATERIAL: Electro-galvanized Steel Stainless Steel 304 Stainless Steel 316 2. APPLICATION: For low pressure exhaust of fumes, gases, corrosive gases etc. As a exhaust hose for diesel engine For provide motion, thermal compensation and isolate vibration of exhaust system For adjusting misalignment in exhaust pipeline Absorbing vibration and stresses for noise reduction

AMBICAFLEX electrical conduit is line of manufacturing strip wound squarelock hose without packing for using in wire and cable protection. AMBICAFLEX have exclusively manufacture electrical conduit with added strength, added flexibility, highly durability and suitable for movable cables exclusively for electrical wire and cable protection. TYPE   1. CONTRUCTION MATERIAL: a. Electro-galvanized Steel b. Stainless Steel 304 c. Stainless Steel 316 2. APPLICATION: As mechanical protection for insulated wires and cables are likely to be exposed to hot and corrosive atmospheric condition As shield for fibre optic cables As mechanical protection for flexible drive such as flexible shaft grinders and vibrators As outer jacket for insulated pipe line As a decorative flexible tube for bathroom fittings As a protective covering for rubber and plastic hose such as burners, ovens, domestic gas and gas water heaters.

automotive exhaust connector is manufactured from thin wall welded tube. Welded tube�s wall is formed electrical conduit is line of manufacturing strip wound squarelock hose without packing for using in wire and cable protection. AMBICAFLEX have exclusively manufacture electrical conduit with added strength, added flexibility, highly durability and suitable for movable cables exclusively for electrical wire and cable protection.For have vibration requirement there is two layers of welded tube is used also for improving exhaust flow connector is designed with inner liner of strip wound hose or wire braided.

Country of Origin : India

AMBICAFLEX bitumen and asphalt hose is line of manufacturing strip wound interlock hose with packing mainly using for bitumen, asphalt and tar loading or unloading application. AMBICAFLEX exclusively manufacture Bitumen and Asphalt hose with extra heavy duty, high strength, and highly durable exclusively for Bitumen and Asphalt application. AMBICAFLEX is adding in product range of Bitumen and Asphalt Hose fittings suitable for asphalt trucks, terminal etc.

AMBICAFLEX bitumen and asphalt hose is line of manufacturing strip wound interlock hose with packing mainly using for bitumen, asphalt and tar loading or unloading application. AMBICAFLEX exclusively manufacture Bitumen and Asphalt hose with extra heavy duty, high strength, and highly durable exclusively for Bitumen and Asphalt application. AMBICAFLEX is adding in product range of Bitumen and Asphalt Hose fittings suitable for asphalt trucks, terminal etc.   . CONTRUCTION MATERIAL a. Electro-galvanized Steel 2. APPLICATION As a loading or unloading hose for truck and trailers Transfer Bitumen and Asphalt in bulk 4. CONSTRUCTION MATERIAL OF FITTINGS MILD STEEL CARBON STEEL ALUMINUM BRONZ  

automotive exhaust connector is manufactured from thin wall welded tube. Welded tube’s wall is formed in between rolls for corrugation then after external wire braid applied on corrugation tube. It is flexing thought corrugation. For have vibration requirement there is two layers of welded tube is used also for improving exhaust flow connector is designed with inner liner of strip wound hose or wire braided.

Size : 32MM (1 ¼” Inch) To 100MM (4” Inch)

AMBICAFLEX automotive exhaust connector is manufactured from thin wall welded tube. Welded tube’s wall is formed in between rolls for corrugation then after external wire braid applied on corrugation tube. It is flexing thought corrugation. For have vibration requirement there is two layers of welded tube is used also for improving exhaust flow connector is designed with inner liner of strip wound hose or wire braided. 1. CONTRUCTION MATERIAL: Stainless Steel 304 2. APPLICATION: In the exhaust manifold on the cylinder block of motor vehicle For provide motion, thermal compensation and isolate vibration of exhaust system For adjusting misalignment in exhaust pipeline Absorbing vibration and stresses for noise reduction 3. SIZE RANGE: 32MM (1 ¼” Inch) To 100MM (4” Inch)    

We are offering stainless steel bellows.

We are offering strip wound square lock hose.

we are offering exhaust hose pressure

we are offering wire braided