Induskart Engitech LLP Chawkadi, Vadodara, Gujarat

We are the exporter for Industrial Valves, Anchors, Pipes fittings, PIPES etc.

The threaded rod Fairfield is basically used to fasten wood or metal together. It acts as a pin that is used to connect two materials together. They are also used to stabilize structures by inserting them into concrete or wood during repair.

Length : Up to 500 mm

Material : Steel Zinc Plated / Stainless Steel (SS-304, SS-316) / Metal

Thread Type : Full thread / Partial thread

A bolt with threads on both ends designed to be screwed permanently into a fixed part at one end and to receive a nut on the other. A bolt is a threaded fastener mated with a nut. A screw has either pre-formed or self-made external threads. A stud is an externally threaded headless fastener. One end mate with a tapped component and the other with a standard nut.

Material : Steel Zinc Plated / Stainless Steel (SS-304, SS-316) / Metal

Y-Strainers are devices for mechanically removing unwanted solids from liquid, gas or steam lines by means of a perforated or wire mesh straining element. They are used in pipelines to protect pumps, meters, control valves, steam traps, regulators and other process equipment.

Number Of Flower : Y Type / Pot Type / T Type / Basket Type

End Connection : Screwed End (S/E OR S/W) / Flanged End

Stop valve is any sort of valve type that completely stops the flow of liquid flow through a pipe. Stop valves is mainly used in plumbing or industrial applications to shut off the flow of (hot or cold) water to a plumbing fixture, such as an icemaker, toilet, faucet, dishwasher etc.

Number Of Flower : O/S and Yoke Type

Pattern : Straight Type / Right Angle / Standard Pattern

A steam trap is a device used to discharge condensates and non-condensable gases with a negligible consumption or loss of live steam. Most steam traps are nothing more than automatic valves. They open, close or modulate automatically.

Number Of Flower : Bucket (Vertical Inverted) Type / Bucket (Horizontal Inverted) Type / Thermodynamic Type

End Connection : Screwed End / Socket Weld Ends / Flanged End

A gate valve, also known as a sluice valve, is a valve that opens by lifting a barrier out of the path of the fluid. Gate valves require very little space along the pipe axis and hardly restrict the flow of fluid when the gate is fully opened. The gate faces can be parallel but are most commonly wedge-shaped.

Operator : Hand Wheel Operated / Cap Operated / Gear Operated

End Connection : Flanged End / Plain End / Screwed End / Socket Weld End / Butt Weld End / Lug Type

Sleeve anchors are the most versatile masonry expansion anchors because they can be used in a variety of base materials, including concrete, brick, and block. They are available in a wide variety of diameters, lengths, and head styles. The available head styles are acorn, hex nut, flat, countersunk, and round head.

Length : Up to 500 mm

Material : Steel Zinc Plated / Stainless Steel (SS-304, SS-316) / Metal

Grade : Grade 2 / Grade 5 / Grade 8 / Grade A325 / 18-8 Stainless / Class 8.8 / Class 10.9 / Class 1

Nylon Anchors are pre-assembled through fixing, a light duty nail expanding for solid masonry and hollow wall constructions. The design of the expansion nail used in the Nylon Anchor is such that it can be removed if need be.

Material : Zinc Plated Steel / Stainless Steel (SS-304, SS-316) / Metal / M.S

Grade : Grade 2 / Grade 5 / Grade 8 / Grade A325 / 18-8 Stainless / Class 8.8 / Class 10.9 / Class 12.9 / A-2 Stainless

A safety valve is a valve that acts as a fail-safe. An example of safety valve is a pressure relief valve, which automatically releases a substance from a boiler, pressure vessel, or other system, when the pressure or temperature exceeds preset limits.

Number Of Flower : Open Discharge Type / Enclosed Discharge Type / Angle Type / Straight Type / POP Type

End Connection : Screwed End / Flanged End

A relief valve or pressure relief valve is a type of safety valve used to control or limit the pressure in a system; pressure might otherwise build up and create a process upset, instrument or equipment failure, or fire.

End Connection : Screwed End / Flange End

A relief valve or pressure relief valve is a type of safety valve used to control or limit the pressure in a system; pressure might otherwise build up and create a process upset, instrument or equipment failure, or fire.

Plug valves are valves with cylindrical or conically tapered "plugs" which can be rotated inside the valve body to control flow through the valve. The plugs in plug valves have one or more hollow passageways going sideways through the plug, so that fluid can flow through the plug when the valve is open.

Pressure Rating : Class-150 / Class-300

Number Of Flower : M.S. Jacketed / Jacketed

End Connection : Screwed End / Flanged End

A piston valve is a device used to control the motion of a fluid along a tube or pipe by means of the linear motion of a piston within a chamber or cylinder. Examples of piston valves are: The valves used in many brass instruments. The valves used in pneumatic cannons.

Range : Elbows Tee Sockets Reducers Nipples Long Bends

Material : HDPE, Steel

Shape : Round, Square

Application : In Pipe fitting

Certification : ISI Certified

Finishing : Polished

Feature : Crack Proof, Fine Finishing, Perfect Shape

Pin type anchor bolts find their use in soft masonry to reduce the effect of vibration and pressure. The most significant advantage of using these bolts is that it can be replaced without affecting the holding strength of the anchor system.

Material : Steel Zinc Plated / Stainless Steel (SS-304, SS-316) / Metal

Nylon Anchors are pre-assembled through fixing, a light duty nail expanding for solid masonry and hollow wall constructions. The design of the expansion nail used in the Nylon Anchor is such that it can be removed if need be.

Application : Structures to concrete / Construction

Length : Up to 500 mm

Material : Zinc Plated Steel / Stainless Steel (SS-304, SS-316) / Metal / M S

Application : Structures to concrete / Construction

Grade : Grade 2 / Grade 5 / Grade 8 / Grade A325 / 18-8 Stainless / Class 8.8 / Class 10.9 / Class 1

A check valve, clack valve, non-return valve, reflux valve, retention valve or one-way valve is a valve that normally allows fluid to flow through it in only one direction. Check valves are two-port valves, meaning they have two openings in the body, one for fluid to enter and the other for fluid to leave.

Pressure Rating : Class-125 / Class-150 / Class-300 / Class-600 / Class-800 / Class-900 / Class-1500

Number Of Flower : Horizontal Type / Vertical Type / Swing Type Non-Return Valve / Feed Check Valve Type

End Connection : Socket Weld End / Flanged End / Screwed End / Wafer End / Solid Lug Type Butt Weld End / Femal

Our mechanical anchors are designed to install easily and securely into a variety of base materials — from concrete and brick to hollow and grouted CMU. They offer optimal performance even in the most demanding structural applications. For applications where there is a risk of concrete cracking, specific anchors have been designed and tested to offer reliability under these conditions.

Length : up to 500 mm

Material : Steel Zinc Plated / Stainless Steel (SS-304, SS-316) / Metal

Grade : Grade 2 / Grade 5 / Grade 8 / Grade A325 / 18-8 Stainless / Class 8.8 / Class 10.9 / Class 1

Knife gate valves are designed mainly for on-off and isolation services in systems with high content of suspended solids. The knife gate valves are especially beneficial for handling slurry, viscous, corrosive and abrasive media. The valves have a minimized pressure drop in fully open position, they are easy to actuate, they have a relatively low weight and are cost effective. Knife gate valves are designed to work in some of the most harsh environments, typically having a sharpened blade to cut through heavy liquids.

Number Of Flower : Horizontal Type / Vertical Type / Swing Type Non Return Valve / Feed Check Valve Type/ Angle T

End Connection : Hex Type / Peg Type / Screwed & Yoke Type / Clip Pattern / Straight Pattern / Standard Bore /

we are the exporter of industrial valves, mechanical anchors, chemical anchors, rebar chemical, pipes fittings, gi and ms pipes etc..

Valve Size : 1.1/2inch, 1.1/4inch, 1/2inch, 1inch, 2inch, 3/4inch, 4/5

Number Of Flower : Industrial Air Valves, Industrial Gas Valves, Industrial Liquid Valves, Industrial Valves

Material : Brass, Carbon Steeel, Carbon Steel, Cast Iron, Cast Steel, Gun Metal

Usage : Air Fitting, Gas Fitting, Oil Fitting, Water Fitting

Range : Centrifugal Vertical Certrifugal Horizontal Centrifugal Submersible Fire Hydrant Diaphragm Gear Peristaltic Lobe Piston

Number Of Flower : Automatic

Material : Stainless Steel

Certification : ISI Certified

Availability : 10-20kg

Country of Origin : 220V

Application : Industry Use

We are offering a wide range of Steel Pipe.

Material : Plastic

Shape : Round

Usage : Construction

Thickness : 5-10mm

A globe valve is a linear motion valve used to stop, start, and regulate the fluid flow. The globe valve disk can be removed entirely from the flow path, or it can completely close the flow path. During opening and closing of globe valve, disc moves perpendicularly to the seat.

Type : Angle Type / Yoke Type / Outside Screwed And Yoke Type / Bolted Bonnet Type Design / Screwed Bo

End Connection : Screwed End / Flanged End / One Side Flanged End / Socket Weld End / Butt Weld End