External Grinder Horizontal Model
To be mounted on lathe tool post. The center of the tool post has to be matched with the center of the lathe. Use a round C.I. / M.S. washer and machine the faces to match the heights.
Applications
For use on Lathes, Shapers, Planer Machines, etc. for operations like Cylindrical External & Internal Grinding, Face / Radius / Surface Grinding.
Spindle
Made from alloy steel suitably heat treated and precision ground. Precision preloaded bearings used.
Standard Accessories
Tool Post Grinder is delivered complete with sturdy guards, motor / spindle pulleys, belts and grinding wheel.
Electric motor supplied only against request at extra cost.
External Grinder Price includes the cast iron mounting body whereas the internal grinding attachment price does not include the cast iron body.
Precautions
Rotate the external spindle only in the direction indicated by the arrow. Horizontal models of Tool Post Grinders are required to be mounted between job / work piece and operator. Vertical modesl of Tool Post Grinders can be mounted beyond the job / work piece.
External Grinder Horizontal Model
To be mounted on lathe tool post. The center of the tool post has to be matched with the center of the lathe. Use a round C.I. / M.S. washer and machine the faces to match the heights.
Applications
For use on Lathes, Shapers, Planer Machines, etc. for operations like Cylindrical External & Internal Grinding, Face / Radius / Surface Grinding.
Spindle
Made from alloy steel suitably heat treated and precision ground. Precision preloaded bearings used.
Standard Accessories
Tool Post Grinder is delivered complete with sturdy guards, motor / spindle pulleys, belts and grinding wheel.
Electric motor supplied only against request at extra cost.
External Grinder Price includes the cast iron mounting body whereas the internal grinding attachment price does not include the cast iron body.
Precautions
Rotate the external spindle only in the direction indicated by the arrow. Horizontal models of Tool Post Grinders are required to be mounted between job / work piece and operator. Vertical modesl of Tool Post Grinders can be mounted beyond the job / work piece.
Made from best quality spring steel EN-47 & approximately hardened.
While ordering Split Sleeve for Taps specify shank & square size. Alternatively mention whether the Tap is 'SHORT HAND TAP' or 'LONG MACHINE TAP'
Made from best quality spring steel EN-47 & approximately hardened.
While ordering Split Sleeve for Taps specify shank & square size. Alternatively mention whether the Tap is 'SHORT HAND TAP' or 'LONG MACHINE TAP'
Features
Small size Taper upto MT-4 made from Bearing Steel EN-31 and through hardened to 58-60 HRc.
Big size tapers from MT-5 upwards made from 20MnCr5 and Case Hardened to 58-60 HRc.
Broadly confirms to IS : 2289 - 1976 (Equivalent to DIN: 806-1961 / ISO : 298)
Precision ground.
Tip runout within 0.015 mm w.r.t. Taper.
Standard Point Angle 60° (other Angles like 75° / 90° etc. against request)
Features
Small size Taper upto MT-4 made from Bearing Steel EN-31 and through hardened to 58-60 HRc.
Big size tapers from MT-5 upwards made from 20MnCr5 and Case Hardened to 58-60 HRc.
Broadly confirms to IS : 2289 - 1976 (Equivalent to DIN: 806-1961 / ISO : 298)
Precision ground.
Tip runout within 0.015 mm w.r.t. Taper.
Standard Point Angle 60° (other Angles like 75° / 90° etc. against request)
The keyway milling attachment can be used to mill keyways on shafts mounted between centers on a lathe. The Attachment is mounted on the lathe tool post and the end mill on the ¾" Drill Chuck. The attachment is supplied without electric motor. The Motor Pulley and the Spindle pulley are supplied along with the attachment.
This attachment can also be used to mill or drill holes or slots on jobs mounted on a lathe chuck keeping the lathe chuck stationary.
Motor : Use 0.5 HP 3 Phase 1440 rpm Electric motor.
Spindle Speed: 570 & 1080 rpm
The keyway milling attachment can be used to mill keyways on shafts mounted between centers on a lathe. The Attachment is mounted on the lathe tool post and the end mill on the ¾" Drill Chuck. The attachment is supplied without electric motor. The Motor Pulley and the Spindle pulley are supplied along with the attachment.
This attachment can also be used to mill or drill holes or slots on jobs mounted on a lathe chuck keeping the lathe chuck stationary.
Motor : Use 0.5 HP 3 Phase 1440 rpm Electric motor.
Spindle Speed: 570 & 1080 rpm
Applications
All Keyless Drill Chuck are suitable for applications on Vertical/Horizontal CNC Machining Centers owing to their self tightening features.
Wipe off the anti rust oil applied on both the Keyless Drill Female Taper & Drill Chuck Arbout Male Taper with MTO or Kerosene before assembling them together. Do not hammer or use press machine to lock the Drill Chuck Arbout & Keyless Chuck. This would distort the Chuck beyond repair.
Heavy Duty Model specially designed for use on VMC/CNC. It is more accurate compared to the standard model.
For right hand rotation application only.
Supplementary Gripping Torque can be applied with the spanner which increases the gripping torque by up to 3 times
All Keyless Drill Chuck supplied with one Spanner & MT-2 Arbor. Arbor of any other taper has to be seperately
Applications
All Keyless Drill Chuck are suitable for applications on Vertical/Horizontal CNC Machining Centers owing to their self tightening features.
Wipe off the anti rust oil applied on both the Keyless Drill Female Taper & Drill Chuck Arbout Male Taper with MTO or Kerosene before assembling them together. Do not hammer or use press machine to lock the Drill Chuck Arbout & Keyless Chuck. This would distort the Chuck beyond repair.
Heavy Duty Model specially designed for use on VMC/CNC. It is more accurate compared to the standard model.
For right hand rotation application only.
Supplementary Gripping Torque can be applied with the spanner which increases the gripping torque by up to 3 times
All Keyless Drill Chuck supplied with one Spanner & MT-2 Arbor. Arbor of any other taper has to be seperately
Applications
Made from 20MnCr5. Case hardened to 55-58 HRc.
As per IS : 6682 - 1982. (Equivalent to DIN : 2187 & ISO : 1080 / 1975).
Precision ground internally & externally.
Concentricity within 0.015 mm.
Applications
Made from 20MnCr5. Case hardened to 55-58 HRc.
As per IS : 6682 - 1982. (Equivalent to DIN : 2187 & ISO : 1080 / 1975).
Precision ground internally & externally.
Concentricity within 0.015 mm.
Reviews & Ratings
Write a Review
Post Free Ad