Mehjal Adhesive Tapes Pvt Ltd Manjusar, Vadodara, Gujarat

PTFE Tapes are normally used for thermal insulation application in cutting application in printing application.Offers low coefficient of friction.Heat Resistance.Anti-stick and release characteristics.Chemical resistance.Can be used for roller wrapping.Coated with Silicone adhesive on one side.Temperature resistance upto 260oC.Can be used in sealing of polymer film in FFS, impulse sealer, band sealer, bag making machines, etc.

Seals and bonds in one step.Virtually invisible fastening.Fast and Easy to use.Strongly Bonds dissimilar materials.Seals out water and dust.Used indoors and out.High temperature resistant.Solvent resistant.Eliminates screwing, riveting, welding, etc.Enhances reliable bonding.High Performance.Visco-elasticity of tape ensure better adhesion penetration into the surfaces and adheration to vibrations, thermal expansions.Provides sealing, cushioning and impact resistivity.

Provides excellent short term protection.Protects surface of the appliances from dust, scratches, UV.Protects surface during transportation.Protects surface during idle conditions when vehicle is not in use for short term durations.Available in transparent, black/white, black and white.Can be peeled off smoothly and immediately.Dont leave residue when peeled off.Available thickness varies from 40 microns to 120 microns.

Visco-elasticity of tape ensure better adhesion penetration into the surfaces and adheration to vibrations, thermal expansions.Provides sealing, cushioning and impact resistivity.Eliminates screwing, riveting, welding, etc.

Backing material available from 0.01mm thickness to 0.125mm thickness.Available with different dimensional strengths.Available in tensile strengths from 0.8kg/inch to 42 kg/inch.Provides excellent shear strength to ensure the proper splicing of material.

Foam tape with pressure sensitive adhesive coated on both sides.Available in different thicknesses as per requirement.Used in glazing / cladding applications.

This tape is constructed using a tissue paper as carrier material coated with synthetic resin water adhesive on both sides.Eco-friendly – Carrier, adhesive and liner can be converted into pulp again and reused.Suitable for very high speed splicing in paper process industries.Suitable for low and medium speed splicing in newspaper and heavy weight paper industries.Easy to tear of the excess paper.Also available in single sided adhesive coating.

Waterproof sealing Linered product can be pre-cut in required dimensions resulting into ease and speed. Resistance to many chemicals Wide temperature tolerance. Natural aluminium colour gives low visibility to repairs in aluminium surfaces

Thin and conformable tape enabling masking of uneven surfaces.Wide operating temperature ranging from -270oC to +400oC.Removes cleanly without adhesive residue after exposure to heat.Coated with high performace silicone adhesive.High strength backing provides superior resistance to puncture and tear.Resistance to chemical attack.Used for high temperature masking.Used for protection of circuit board gold finger contacts during wave solder.Used for insulation on transformers, motors, and coils.Used for thermocoupling.Used in Fibre Optics Cables.Used in Solar Panels.

The especially selected paper used is a strong, thin, light white kraft paper which prevents formation of shadows impressions when used on pale and thin veneers. All materials used are ACID AND FAT FREE thus avoiding specking formation and staining of veneers. The especially formulated glue has a very quick adherence on all species of wood. The special thin paper avoids fibre deformation and pressure marks. The tape is strong even when moistened.

Normally used for mounting nylon / rubber / photopolymer printing plates to the cylinder in flexographic printing machines.Use of these tapes, flexo printing quality is enhanced.Reduced dot gain.Foam tape enables fine halftone printing.Higher peel adhesion to most common plates.Low tack on one side and higher tack on other side can be made available where higher tack can be applied on the plate side and lower tack on the cylinder side.

Used for peel off test to ensure proper dryness of paint coating / powder coating.Specially formulated adhesive that leaves no residue on the surface and peels off without breaking.Different qualities of tapes can be made available for different requirement of peel strengths

Compatible to irregular surfaces.Can be used indoors and outdoors.Can also be used to mount signages, nameplates, trims, electrical components, etc.Provides good strength.Different qualities available for different mounting weights.

Used in mirror mounting in wing mirrors.Strongly bonds the mirror with the rear surface to ensure resistance to contact driving vibrations, wind pressures, environmental factors, manual tampering, etc.

No screws, No drilling, no studding, no nailing, no rusting.Holds mirror to base without screws.Saves time.Eliminates costly replacements.Absorbs vibrations.Resists humidity.Ease in apply.

Masking Tapes is a pressure sensitive tape made of a thin and easy-to-tear paper or polyester base depending on application. The adhesive is the key element for its application. It allows tape to be easily removed from the surface without leaving residue or damaging the surface. Different qualities of masking tapes are available for different strengths and temperature applications.

Masking Tapes is a pressure sensitive tape made of a thin and easy-to-tear paper or polyester base depending on application.The adhesive is the key element for its application. It allows tape to be easily removed from the surface without leaving residue or damaging the surface.Different qualities of masking tapes are available for different strengths and temperature applications.

Made from crepe paper or craft papers depending on the flexibility of material required for any specific application.These papers are available in different thicknesses. Masking papers are normally used for large are masking application.These papers are applied with masking tapes on the edges.

Highly conformable to both irregular and curved surfaces.Used for masking of electroplating, x-ray plates, chemical milling.Used for sealing of radioactive canisters and thermopane windows.Used for shielding radiation barrier.Used for decoration in simulated lead windows.Lead foil tapes with liner allows diecut.Aggressive Pressure Sensitive Adhesive is designed to offer excellent quick stick and ultimate adhesion.

ALUMINIUM FOIL TAPES MEHJAL Aluminium tapes come with range of different thicknesses and performance levels for different applications. We offer a cost effective solution to all type of typical applications ensuring efficiency and performance. Our range of aluminium foil tapes can work in requirements like HVAC, Appliance, Automotive, Aerospace, Electronics, Metal finish, marine, construction and general industrial uses. MEHJAL Aluminium foil offers: Softness and conformability for application ease.

High shear strength ensure strong holding of laminate with the surface.Specially formulated adhesive leaves no stains and residue.Peels off easily and in single piece.

CORE VENEER TAPES Eliminates stapling. High strength kraft paper backing ensures building core panels. Perforation ensures strong bonding between two layers.

Normally used to mount metal plate to cylinder for embossed printing. Temperature resistance upto 180oC. Can be removed easily. Does not leave any adhesive residue. September 24, 2016

Medium duty tensilised polypropylene strapping tape with a natural rubber adhesive system.Specially designed tape for stain and adhesive transfer resistant.Used for temporary holding of doors, frames, glass, etc.