O Rings Dealers in Vadodara

The Viton Rings have advanced chemical resistance and are used for pumps in pest control, disinfection, agricultural, mold remedy, and lawn care sprayers. They have resistance to hydrocarbons and boast an extremely wide temperature range. They can also deal with chemical attacks. Plus, they have high-temperature resistance. The rings can maintain their flexibility and shape for a longer period. They remain intact under high pressure. They boast of the chemical resistance needed for sealing applications for oils, mineral acids, and fuels. They have good resistance to oxidation, ozone, mold and fungus, and others.

All standard o-ring sizes (imperial and metric) are available. Custom o-rings are available in standard cross-sections (imperial and metric) to any length or ID. They will be molded or spliced using vulcanizing or adhesive depending upon application.       We can also supply encapsulated o-rings where one material is covered with a continuous layer of another material (usually Teflon® ). All standard International sizes are held in stock for immediately delivery, however, S P Eng. is also able to supply speciality O-Rings at competitive prices. Encapsulated, PTFE, Viton®, Kalrez Silicone and gas filled are just an example of typical non-standard materials we supply on a regular basis to a wide variety of valued customers.       Metallic O-Rings can also be manufactured to individual customer specifications. Please contact us with your specific enquiries and let our Sales Team assist you in solving your sealing requirements.       For materials, sizes and applications see O-Ring Materials below.       Nitrile, Silicone and Viton® are also available in closed-cell sponge for applications requiring high compressibility. Other elastomers (Butyl, EPDM, Pure Gum, etc.), PVC, Tygon and Urethane are also available. For guidelines on the performance of these materials, see Rubber/PVC Materials.

Chevron Packing Set From wide range of collections, we are engaged in offering best and most appreciated range of Chevron Packing Set. These products are designed and contrived by our qualified and hard working employees. They are best in class and quality assured. They are designed with the assistance of best machines to keep it as per required level. These machines are rubber finished and used for industrial used. They are quality assured and heat resistant too. Our patrons can avail this array at very cost effective rates.

An O-ring, also known as a packing, or a toric joint, is a mechanical gasket in the shape of a torus; it is a loop of elastomer with a round cross-section, designed to be seated in a groove and compressed during assembly between two or more parts, creating a seal at the interface. The O-ring may be used in static applications or in dynamic applications where there is relative motion between the parts and the O-ring. Dynamic examples include rotating pump shafts and hydraulic cylinder pistons.O-rings are one of the most common seals used in machine designPrimarily used for static sealing of inactive machinery components against liquids and gases. Special solutions and special forms from Freudenberg Sealing Technologies are also suitable as dynamic sealing elements, e.g. as piston or rod seals in the hydraulic system.   Material Used:- 1)  (NBR, HNBR, HSN): a common material for o-rings because of its good mechaNitrile rubbernical properties, its resistance to lubricants and greases, and its relatively low cost. The physical and chemical resistance properties of NBR materials are determined by the acrylonitrile (ACN) content of the base polymer: low content ensures good flexibility at low temperatures, but offers limited resistance to oils and fuels. As the ACN content increases, the low temperature flexibility reduces and the resistance to oils and fuels improves. Physical and chemical resistance properties of NBR materials are also affected by the cure system of the polymer. Peroxide-cured materials have improved physical properties, chemical resistance and thermal properties, as compared to sulfur-donor-cured materials. Standard grades of NBR are typically resistant to mineral oil-based lubricants and greases, many grades of hydraulic fluids, aliphatic hydrocarbons, silicone oils and greases and water to about 80 °C. NBR is generally not resistant to aromatic and chlorinated hydrocarbons, fuels with a high aromatic content, polar solvents, glycol-based brake fluids and non-flammable hydraulic fluids (HFD). NBR also has low resistance to ozone, weathering and aging. HNBR has considerable improvement of the resistance to heat, ozone and aging, and gives it good mechanical properties.   2) Silicone rubber (SiR): noted for their ability to be used over a wide temperature range and for excellent resistance to ozone, weathering and aging. Compared with most other sealing elastomers, the physical properties of silicones are poor. Generally, silicone materials are physiologically harmless so they are commonly used by the food and drug industries. Standard silicones are resistant to water (to 100 °C), aliphatic engine and transmission oils and animal and plant oils and fats. Silicones are generally not resistant to fuels, aromatic mineral oils, steam (short term to 120 °C is possible), silicone oils and greases, acids or alkalis. Fluorosilicone elastomers are far more resistant to oils and fuels. The temperature range of applications is somewhat more restricted. 3) Fluoroelastomer (FKM): noted for their very high resistance to heat and a wide variety of chemicals. Other key benefits include excellent resistance to aging and ozone, very low gas permeability and the fact that the materials are self-extinguishing. Standard FKM materials have excellent resistance to mineral oils and greases, aliphatic, aromatic and chlorinated hydrocarbons, fuels, non-flammable hydraulic fluids (HFD) and many organic solvents and chemicals. Generally not resistant to hot water, steam, polar solvents, glycol-based brake fluids and low molecular weight organic acids. In addition to the standard FKM materials, a number of specialty materials with different monomer compositions and fluorine content (65% to 71%) are available that offer improved chemical or temperature resistance and/or better low temperature performance.

Manufacturer of o rings, silicone o rings, rubber o rings, automotive o rings, fluoroelastomer o rings, PTFE o rings, nitrile o rings, encapsulated o rings, silicone o rings, hydrogenated nitrile o rings, neoprene o rings.   O Ring :  Oil resistance High/ low temperature resistance Ozone proof and acid resistance High tension resistant O Ring : Static seal and dynamic seal Working temperature range:-50~+300 Working pressure:220kg/cm Medium:high concentration acid,alkai,air,water,oil

PTFE ‘O ‘ ring are manufactured by using a specially selected high quality virgin PTFE material, During assembly of metal or plastic coupling these ‘O’ ring works as a sealing surface of two glass ends, our well trained machinist maintains accuracy of oveall and sealing surface.

Sr.No SIZE 1 1" 2 1.5" 3 2" 4 3" 5 4" 6 6" 7 9" 8 12"

Oil-Seal / O-Ring - The material used for the sealing lip is a mixture of one or more basic elastomers and a variety of ingredients, such as: reinforcing fillers, plasticizers, antioxidants, accelerators, etc

The Best quality Natural Rubber O ring for your Tattoo Machine. Our Rubber O ring gives the best Stiffness and long life to Contact Springs 100PcsPack

Manufacturing s per customer’s specifications and drawings upto 1500 MM Dia.  

We are offering ptfe o ring. Exercore engineering company is leading manufacturer & exporter of ptfe teflon o rings in various sizes and materials.