Software used for detail engineeringIn-house excel sheet
Structure design softwareSTAADPro
3D modelAdvance steel
SectorsOil and gas, Chemical, Petrochemical, Refinery
Services to countriesIndia, Gulf, Europe and America
Mechanical design software usedPV Elite
Finite element analysisANSYS
Thermal design of heat / waste heat recovery unit to improve energy efficiency and thus reduce energy consumption as well as GHG emissions.
Evaluate possibility of various design option - Single or two pass on flue gas side, horizontal / vertical tube arrangement - based on thermal and hydraulic design.
Material selection to suit the requid operating conditions.
Mechanical design of unit.
Structural design for non-pressure parts and support arrangement.
3D modelling of complete unit alongwith support structure.
Thermal design of heat / waste heat recovery unit to improve energy efficiency and thus reduce energy consumption as well as GHG emissions.
Evaluate possibility of various design option - Single or two pass on flue gas side, horizontal / vertical tube arrangement - based on thermal and hydraulic design.
Material selection to suit the requid operating conditions.
Mechanical design of unit.
Structural design for non-pressure parts and support arrangement.
3D modelling of complete unit alongwith support structure.
Software used for detail engineeringIn-house excel sheet
Structure design softwareSTAADPro
3D modelAdvance steel
SectorsOil and gas, Chemical, Petrochemical, Refinery
Services to countriesIndia, Gulf, Europe and America
Mechanical Design Software usedPV Elite
Finite element analysisANSYS
Thermal design of heat / waste heat recovery unit to improve energy efficiency and thus reduce energy consumption as well as GHG emissions.
Evaluate possibility of various design option - Single or two pass on flue gas side, horizontal / vertical tube arrangement - based on thermal and hydraulic design.
Material selection to suit the requid operating conditions.
Mechanical design of unit.
Structural design for non-pressure parts and support arrangement.
3D modelling of complete unit alongwith support structure.
Thermal design of heat / waste heat recovery unit to improve energy efficiency and thus reduce energy consumption as well as GHG emissions.
Evaluate possibility of various design option - Single or two pass on flue gas side, horizontal / vertical tube arrangement - based on thermal and hydraulic design.
Material selection to suit the requid operating conditions.
Mechanical design of unit.
Structural design for non-pressure parts and support arrangement.
3D modelling of complete unit alongwith support structure.
Type of draftForced draft, Induced draft, Natural draft
Drive transmissionBelt and Pulley, Direct drive, Gear drive
SectorsOil and gas, Chemical, Petrochemical, Refinery
Services to countriesIndia, Gulf, Europe and America
Fluid serviceVapor, Liquid, Condensing
ACHE Mechanical GA and Detail fabrication drawing
Fabrication drawing and material lists generated from 3D models.
Design data, notes, nozzle table.
Welding details
ACHE Mechanical GA and Detail fabrication drawing
Fabrication drawing and material lists generated from 3D models.
Design data, notes, nozzle table.
Welding details
Exchanger typeFixed tube sheet, U tube and floating tube sheet
SectorsOil and gas, Chemical, Petrochemical, refinery
Services to countriesIndia, Gulf, Europe and America
Design of Shell and tube heat exchanger using HTRI software for all TEMA type units.
Re-rating and performance validation of existing units.
Thermal design of new and existing both units.
Thermosyphon reboiler with piping inputs.
Single phase and two phase units.
Optimization of heat transfer area.
Vibration analysis of tube bundle.
Design of Shell and tube heat exchanger using HTRI software for all TEMA type units.
Re-rating and performance validation of existing units.
Thermal design of new and existing both units.
Thermosyphon reboiler with piping inputs.
Single phase and two phase units.
Optimization of heat transfer area.
Vibration analysis of tube bundle.
Echanger typeFixed tube sheet, U tube and floating tube sheet
SectorsOil and gas, Chemical, Petrochemical, refinery
Services to countriesIndia, Gulf, Europe and America
Thermal design using HTRI software for all TEMA type units.
Re-rating and performance validation of existing units.
Thermosyphon reboiler with piping inputs.
Single phase and two phase units.
Optimization of heat transfer area.
Vibration analysis of tube bundle.
Thermal design using HTRI software for all TEMA type units.
Re-rating and performance validation of existing units.
Thermosyphon reboiler with piping inputs.
Single phase and two phase units.
Optimization of heat transfer area.
Vibration analysis of tube bundle.
Exchanger typeFixed tube sheet, U tube and floating tube sheet
SectorsOil and gas, Chemical, Petrochemical, refinery
Services to countriesIndia, Gulf, Europe and America
Thermal design using HTRI software for all TEMA type units.
Re-rating and performance validation of existing units.
Thermosyphon reboiler with piping inputs.
Single phase and two phase units.
Optimization of heat transfer area.
Vibration analysis of tube bundle.
Thermal design using HTRI software for all TEMA type units.
Re-rating and performance validation of existing units.
Thermosyphon reboiler with piping inputs.
Single phase and two phase units.
Optimization of heat transfer area.
Vibration analysis of tube bundle.
Type of draftForced draft, Induced draft, Natural draft
Drive transmissionBelt and Pulley, Direct drive, Gear drive
SectorsOil and gas, Chemical, Petrochemical, Refinery
Services to countriesIndia, Gulf, Europe and America
Fluid serviceVapor, Liquid, Condensing
Re-rating and performance validation of existing units.
Bought out specification for fans, motors, vibration sensors, drive system, bearing block, etc.
Review of vendor documents
Units with louvers / recirculation systems for winterization.
Software used for design is HTRI.
Unit sizes - Single bay units to units with more than eight bays.
Material handled - Carbon steel, Low alloy steels, All major grades of Stainless Steels, Duplex steels, Inconel, etc.
Process service - Single phase liquid / Condensing / Single phase vapor.
Design conditons - Range of design pressure and temperatures.
Re-rating and performance validation of existing units.
Bought out specification for fans, motors, vibration sensors, drive system, bearing block, etc.
Review of vendor documents
Units with louvers / recirculation systems for winterization.
Software used for design is HTRI.
Unit sizes - Single bay units to units with more than eight bays.
Material handled - Carbon steel, Low alloy steels, All major grades of Stainless Steels, Duplex steels, Inconel, etc.
Process service - Single phase liquid / Condensing / Single phase vapor.
Design conditons - Range of design pressure and temperatures.
Type of draftForced draft, Induced draft, Natural draft
Drive transmissionBelt and Pulley, Direct drive, Gear drive
SectorsOil and gas, Chemical, Petrochemical, Refinery
Services to countriesIndia, Gulf, Europe and America
Fluid serviceVapor, Liquid and Condensing
Re-rating and performance validation of existing units.
Bought out specification for fans, motors, vibration sensors, drive system, bearing block, etc.
Review of vendor documents
Units with louvers / recirculation systems for winterization.
Software used for design is HTRI.
Unit sizes - Single bay units to units with more than eight bays.
Material handled - Carbon steel, Low alloy steels, All major grades of Stainless Steels, Duplex steels, Inconel, etc.
Process service - Single phase liquid / Condensing / Single phase vapor.
Design conditons - Range of design pressure and temperatures.
...more
Thermal Design of Air Cooled Heat Exchanger Using HTRI Software
Re-rating and performance validation of existing units.
Bought out specification for fans, motors, vibration sensors, drive system, bearing block, etc.
Review of vendor documents
Units with louvers / recirculation systems for winterization.
Software used for design is HTRI.
Unit sizes - Single bay units to units with more than eight bays.
Material handled - Carbon steel, Low alloy steels, All major grades of Stainless Steels, Duplex steels, Inconel, etc.
Process service - Single phase liquid / Condensing / Single phase vapor.
Design conditons - Range of design pressure and temperatures.
Drive transmissionBelt and Pulley, Direct drive, Gear drive
SectorsOil and gas, Chemical, Petrochemical, Refinery
Services to countriesIndia, Gulf, Europe and America
Types of ACHEForced draft, Induced draft, Natural draft
Design CodesAISC, IS800, BS, EN
AnalysisTransportation, lifting
Structure Design of Air cooler heat exchanger
Structure Design by using STADDPro.
Structure design using different codes as per project requirement (i.e. IS800, AISC, BS, EN etc.)
Wind design calculation
Seismic design calculation
Anchor bolt and base plate design
Foundation load data
Structure Design of Air cooler heat exchanger
Structure Design by using STADDPro.
Structure design using different codes as per project requirement (i.e. IS800, AISC, BS, EN etc.)
Wind design calculation
Seismic design calculation
Anchor bolt and base plate design
Foundation load data
Exchanger typeFixed tube sheet, U tube and floating tube sheet
SectorsOil and gas, Chemical, Petrochemical, Refinery
Services to countriesIndia, Gulf, Europe and America
Fluid serviceVapor, Liquid, Condensing
Thermal design of all TEMA type units
Vibration analysis of tube bundles
Re-rating and performance validation of existing units
Fixed tube sheet, Floating head and U-tube units
Optimazation of design
Thermal design of all TEMA type units
Vibration analysis of tube bundles
Re-rating and performance validation of existing units
Fixed tube sheet, Floating head and U-tube units
Optimazation of design
Exchanger typeFixed tube sheet, U tube and floating tube sheet
SectorsOil and gas, Chemical, petrochemical, refinery
Services to countriesIndia, Gulf, Europe and America
Mechanical design of Shell and tube heat exchanger using PV elite and compress software for all TEMA type.
Complete detail engineering.
FEA of thin and thick expansion.
FEA of local nozzle loads.
FEA / fatigue analysis for complete unit based on service condition.
WRC / FEA for nozzle loads and flange derating.
Design of SR nozzles.
Mechanical design of Shell and tube heat exchanger using PV elite and compress software for all TEMA type.
Complete detail engineering.
FEA of thin and thick expansion.
FEA of local nozzle loads.
FEA / fatigue analysis for complete unit based on service condition.
WRC / FEA for nozzle loads and flange derating.
Design of SR nozzles.
Exchanger typeFixed tube sheet, U tube and floating tube sheet
SectorsOil and gas, chemical, petrochemical, refinery
Services to countriesIndia, Gulf, Europe and America
Mechanical design of Shell and tube heat exchanger using PV elite and compress software for all TEMA type.
Complete detail engineering.
FEA of thin and thick expansion.
FEA of local nozzle loads.
FEA / fatigue analysis for complete unit based on service condition.
WRC / FEA for nozzle loads and flange derating.
Design of SR nozzles.
Mechanical design of Shell and tube heat exchanger using PV elite and compress software for all TEMA type.
Complete detail engineering.
FEA of thin and thick expansion.
FEA of local nozzle loads.
FEA / fatigue analysis for complete unit based on service condition.
WRC / FEA for nozzle loads and flange derating.
Design of SR nozzles.
Exchanger typeFixed tube sheet, U tube and Floating tube sheet
SectorsOil and gas, Chemical, Petrochemical, Refinery
Services to countriesIndia, Gulf, Europe, America
Mechanical design of Exchanger using PVelite and Compress software
Fixed tube sheet, U-tube and floating head units
Single phase and two phase unit
Thermosyphon reboilers with piping unputs
Design and FEA of expansion joints (Thin and Thick type)
WRC / FEA nozzle loads and flange derating
Design of SR nozzle
Mechanical design of Exchanger using PVelite and Compress software
Fixed tube sheet, U-tube and floating head units
Single phase and two phase unit
Thermosyphon reboilers with piping unputs
Design and FEA of expansion joints (Thin and Thick type)
WRC / FEA nozzle loads and flange derating
Design of SR nozzle
Exchanger typeFixed tube sheet, U tube and floating tube sheet.
SectorsOil and gas, chemical, petrochemical, refinery
Services to countriesIndia, Gulf, Europe and America
Mechanical design of shell and tube heat exchanger is done by using PV elite and compress software for all TEMA type units.
Complete detail engineering.
FEA of thin and thick expansion.
FEA of local nozzle loads.
FEA / fatigue analysis for complete unit based on service condition.
WRC / FEA for nozzle loads and flange derating.
Design of SR nozzles.
...more
Mechanical Design of Shell and Tube Heat Exchanger
Mechanical design of shell and tube heat exchanger is done by using PV elite and compress software for all TEMA type units.
Complete detail engineering.
FEA of thin and thick expansion.
FEA of local nozzle loads.
FEA / fatigue analysis for complete unit based on service condition.
WRC / FEA for nozzle loads and flange derating.
Design of SR nozzles.
SectorsOil and gas, Chemical, Petrochemical, Refinery
Services to countriesIndia, Gulf, Europe and America
Mechanical design software usedPV Elite
Mechanical design software usedCodeware Compress
Finite element analysisANSYS
Complete mechanical design as per ASME Sec VIII, Div. 1, Div. 2 & PD5500.
Rating of existing units for new service conditions
complete detail engineering and fabrication drawings
Evaluation of fitness for service / remaining life based on existing condition.
Complete mechanical design as per ASME Sec VIII, Div. 1, Div. 2 & PD5500.
Rating of existing units for new service conditions
complete detail engineering and fabrication drawings
Evaluation of fitness for service / remaining life based on existing condition.
SectorsOil and gas, Chemical, Petrochemical, Refinery
Services to countriesIndia, Gulf, Europe and America
Complete mechanical design as per ASME Sec VIII, Div. 1, Div. 2
Rating of existing units for new service conditions
Evaluation of fitness for service / remaining life based on existing condition.
...more
Mechanical Design of Process Columns Using Compress Software
Complete mechanical design as per ASME Sec VIII, Div. 1, Div. 2
Rating of existing units for new service conditions
Evaluation of fitness for service / remaining life based on existing condition.
SectorsOil and gas, Chemical, Petrochemical, Refinery
Services to countriesIndia, Gulf, Europe and America
Finite element analysisANSYS
Complete mechanical design as per ASME Sec VIII, Div.1, Div.2
Rating of existing units for new service condition
Evaluation of fitness for service / remianing life based on existing condition.
Complete mechanical design as per ASME Sec VIII, Div.1, Div.2
Rating of existing units for new service condition
Evaluation of fitness for service / remianing life based on existing condition.
SectorsOil and gas, Chemical, Petrochemical, Refinery
Services to countriesIndia, Gulf, Europe and America
Finite element analysisANSYS
Mechanical design of Pressure vesssel as per ASME Sec VIII, Div. 1, Div.2
Rating of existing units for new service conditions.
Complete enginerrign support.
WRC / FEA for nozzle loads and flange derating.
...more
Mechanical Design of Pressure Vessels Using PV Elite Software
Mechanical design of Pressure vesssel as per ASME Sec VIII, Div. 1, Div.2
Rating of existing units for new service conditions.
Complete enginerrign support.
WRC / FEA for nozzle loads and flange derating.
Design Code : ASME, TEMA and API
Material : CS, all major grades of SS, clad material
SectorsOil and gas, Chemical, Petrochemical, Refinery
Services to countriesIndia, Gulf, Europe and America
Finite element analysisANSYS
Complete mechanical design as per ASME Sec VIII, Div.2
Rating of existing units for new service conditions.
Evaluation of fitness for service / remaining life based on existing condition.
Complete mechanical design as per ASME Sec VIII, Div.2
Rating of existing units for new service conditions.
Evaluation of fitness for service / remaining life based on existing condition.
Design Code : ASME, API
Material : CS, all major grades of SS, clad material
MaterialCS, all major grades of SS, clad materials
Mechanical design softwarePV elite
Mechanical design softwareCodeware compress
Design codesTEMA, API
SectorsOil and gas, Chemical, Petrochemical, Refinery
Services to countriesIndia, Gulf, Europe and America
AnalysisLifting lug and Lifting trunnion
Complete mechanical design as per ASME Sec VIII, Div.1, Div.2
Rating of existing units for new service conditions
WRC / FEA for nozzle loads and flange derating
Materials : CS, all major grades of SS, clad materials
...more
Mechanical Design of Pressure Vessel Using Compress Software
Complete mechanical design as per ASME Sec VIII, Div.1, Div.2
Rating of existing units for new service conditions
WRC / FEA for nozzle loads and flange derating
Materials : CS, all major grades of SS, clad materials
Material : CS, all major grades of SS, clad materials
Exchanger typeFixed tube sheet, U tube and floating tube sheet
SectorsOil and gas, Chemical, Petrochemical, Refinery
Services to countriesIndia, Gulf, Europe and America
Mechanical design of Exchanger using PVelite and Compress software
Fixed tube sheet, U-tube and floating head units
Single phase and two phase unit
Thermosyphon reboilers with piping unputs
Design and FEA of expansion joints (Thin and Thick type)
WRC / FEA nozzle loads and flange derating
Design of SR nozzle
Mechanical design of Exchanger using PVelite and Compress software
Fixed tube sheet, U-tube and floating head units
Single phase and two phase unit
Thermosyphon reboilers with piping unputs
Design and FEA of expansion joints (Thin and Thick type)
WRC / FEA nozzle loads and flange derating
Design of SR nozzle
Transheat provides engineering design services for process plants and process equipment used in process plants. Our customers are located in india, gulf, europe and america.
Reviews & Ratings
Write a Review
Post Free Ad
