Check Valves Dealers in Makarpura, Vadodara (16 products available)

Material : Carbon Steel, Stainless Steel

Application : Industrial

Finishing : Polished

Brand Name : Hydroforces

Supply Ability : 1000 Piece/Pieces per Month

Max Pressure : 500 bar

This valve is used to regulate an actuator speed in a circuit where line pressure is almost steady and small fluctuation of oil flow due to pressure changes is permitted. Integrated check valve allows reversed free flow from outlet to inlet port.

We are instrumental in bringing to the customers Industrial Check Valve that are appreciated in the market for their durability and superior performance. We are recognized as one of the pre-eminent Manufacturers and Suppliers of Industrial Check Valves. Our Industrial Check Valve is manufactured from high-grade raw materials.    

Brand Name : SG

Material : A 105, WCB, CF8, CF8M

Media : Hot Oil, Chlorine, Critical Gas/liquid, Steam.

Application : No return flow, reliable

Place of Origin : Ankleshwar, Gujarat

Pressure : 800#, 150/300#

Port Size : 15mm to 300mm

Temperature of Media : 400 deg C

Manufacturers of forged lift check valves in a 105, f 304, f 316, f 11, f22 etc. And cast swing check valves in wcb, cf8, cf8m in 150300#.

We are a renowned Modular Throttle Check Valve Manufacturer and Supplier. The Modular Throttle Check Valve offered by us controls the flow for positive direction pass oil port. Big and small Modular Throttle Check Valve can be adjusted by handle. It passes to check valve for reverse flow. Dimensional accuracy, sturdy make and corrosion resistance are some of the prominent features of the Modular Throttle Check Valve. Specifications : Max. Pressure : 210 bar Max. Flow Size : 02 up to 35L/min & size 03 up to 70L/min

Design Standard : MANUFACTURER'S STANDARD

Shell Design : ANSI B 16.34

Face To Face Dimensions : MFR'S STANDRAD

Flange Connection Rating : ANSI B 16.5 150# / DIN PN 10

Testing Standard : BS EN 12266-1

Connection : WAFER, RF

CV Series, One-way valve is for in-line use. Suitable for any type of hydraulic system using liquids that are not highly viscous. The standard types are in Trivalent plated carbon steel and are therefore especially suitable for non-corrosive mineral based oils and liquids.   Features Standard types:   Good pressure / flow characteristics, see graphs Valve body in Trivalent plated carbon steel Piston in carbon steel Internal spring in silicon steel - stabilized Cracking points 0.35 bar and 4.5 bar are standard, other values on request   Alternative Uses: As a pressure sequence valve by changing the internal spring to an appropriate 'cracking point' value. For flow restrictor check valves a central bleed hole can be provided, sized to customer requirements.  

Design Standard : MANJUFACTURER'S STANDARD

Shell Design : ANSI B 16.34

Face To Face Dimensions : ANSI B 16.1 UPTO 4">6" MFR'S STANDARD

Flange Connection Rating : ANSI B 16.5 150# / DIN PN 10

Testing Standard : BS EN 12266-1

Connection : FLANGED, RF

Design Standard : : BS 1868 / ASME B 16.34 / API 6D Standard

Inspection & Testing Standard : : BS EN ISO 12266 – I (BS 6755 – I) / API 598 / ISO 5208

Flange To Flange Distance : : As Per ANSI B 16.10 / API 6D

End Connection : : Flanged End to ANSI B 16.5, Class 150 / 300 / 600

  : : BS 10 Table D / E / F / H

  : : PN 6 / PN 10 / PN 16 / PN 25 / PN 40 / PN 64

  : : DIN Standard / JIS Standard / IS Standard

  : : Butt Weld End to ANSI B 16.25

Manufacuring Size Range : : 1/2″ (DN15) to 24″(DN 600)

Pressure Rating of Valve : : 150# / 300# / 600#

  : : PN 10 / PN 16 / PN 25 / PN 40 / PN 64 / PN 100

"r-square" cast steel swing check valves are used in pipe lines with liquid and gaseous fluids over a wide range of line pressures and temperatures "r-square" swing check valves body designed for strength to meet operating conditions and contoured to minimize erosion and resistance to flow. the disk is opened and sustained in open position by the velocity pressure of the fluid and closed by the force of gravity, seating load and resultant tightness is aided by back pressure in the line. the body seat ring threaded to the body to avoiding leakage the path between the seat ring and the body. The seating surfaces are ground and lapped. "r-square" check valve are offered with flange and butt weld ends to bs 1868.

Leveraging on our rich industrial expertise, we make available in the markets Non Return Valves. Designed with precision, Non Return Valves are high on demand in the national and international markets. Non Return Valves serves the requirements of various industries where liquid, air and gas is used. Flawless functioning, durability and long functional life are some of the special features of Non Return Valves manufactured by us. Variety Inline check valveCheck valve Raw Materials Used Inline check valve: Poppet type Steel ConstructionCheck valve: Body Material : Cast Iron, Gun Metal Sizes available Inline check valve : 1/4" to 1 1/2" BSPCheck valve : 1/2" to 2" BSP Attributes Inline check valveCracking Pressure - 5 to 50 PSIWorking Pressure up to 350 BarCheck valveAvailable in Threaded and Flage TypeWith or Without Spring Type Packaging available Standard packaging or according to customer’s specifications Minimum Quantity Order 10 Pieces

in line check valve, Pneumatic Control Valves, Hydraulic Valves

inline check valves, Jic Fittings, Globe Valves, gauge syphon

Dual Plate Check Valves, Blind Spades and Spacer Rings, Sluice Gates

Non Return Valves, gas pipe line hose, Pump, Pipe, regulators

Check Valves, Industrial Valves, one piece ball valves

Check Valves, Crushers, Industrial Pumps