Solar Charge Controller Dealers

We are a renowned Solar Laptop Charger Manufacturer.Our best quality Solar Laptop Battery Charger is one of the unique product of entire product line. The complete range of our Solar Laptop Charger is available at very reasonable rates.Our highly durable Solar Laptop Charger is very easy to use.

We are engaged in trading and supplying a broad range of Solar Charge Controllers. These are used amongst the patrons a throughout the country. We offer these products in safe and durable packaging to ensure their correct delivery to the customers. Our products are available as per the industry standards and are reliable too. We provide products after checking them on several norms. These are made by using qualitative raw material, which is acquire from well known vendors in order to meet the set quality standards. These are provided at reasonable rates as per the given specifications.

Solar Charger that are acclaimed for optimum quality and durable standards. We test them on varied parameters thereby delivering functionally advanced range of products to our clients. They are configured with solar cells that trap the solar energy and convert them into electrical energy.

A solar charge controller limits the rate at which charge is added to or drawn from electric batteries, protecting batteries against overcharging from solar panels as well as complete draining or ‘deep discharge’, which can reduce battery performance and lifespan or pose a safety risk. A Solar Charge Controller is needed in virtually every solar power system that utilizes batteries. A basic charge controller simply monitors battery voltage and stops the charging when the battery voltage rises to a certain level. Modern charge controllers slowly lower the amount of power applied to the battery as it gets closer and closer to full charge. The NEXTGEN Solar Charge Controller uses sophisticated PWM (pulse width modulation) technology to adjust charging rates, as the battery gets closer to full charge, allowing for uniform charging and improving battery performance and life.   Features Multi-stage PWM charge control to improve battery performance and life Integrated temperature compensation with external temperature sensor Low power load controller and PWM solar charger in a single unit Overload / short circuit / reverse flow and battery reverse polarity protections with status display Intelligent microprocessor control Adjustable charging and discharging control parameters Optional dawn / dusk operation with timer LCD monitor for parameter display and communication interface with PC for data logging Enables optimum utilization of solar power Low PV to battery drop Easy installation, simple handling Robust, inexpensive, energy efficient, suitable for rural / urban solar power systems

We offer grid interactive solar charge controller. * priority: solar --> battery --> grid power. ( solar --> battery --> grid power thro inverter to load as well battery) • mppt technology, efficiency is improved by more than 20%. • first in its class lcd with power and energy measurement. • menu settable configuration using 2x16 lcd and 3 push buttons. • menu settable battery voltage, battery current , float voltage and float current. • three stage charging. • over voltageover current protection. • optically isolated output to control mains charger and inverter.

We are offering solar charge controller manufacturer and supplier based in india. solar charge controller that we provide is known for its compact design and flawless functioning for charging and discharging. These controllers are made available at reasonable rates to suit the budget needs of all. model available nt- s c c - 05a features micro controller accuracybig terminals for easy terminationautomatic detection of the voltage offers protection against over charging or discharging over load short circuit reverse current (fuse10a)reverse polarity (r.p) display 3 led indicators p v : green - charging battery : red battery lowr.p : red reverse polarity protection.

The Solar Charge Controllers, provided by us, are known for their quality. We have most up-to-date machines and cutting-edge technologies to make sure that the products are packed accurately. This assures that the products are safe from the external damaging factors. You can rest assured us for the safest and superfast deliveries of the product range that we carry out in the dedicated time frame.   Product Code : 111134

The most recent and highly reliable type of Solar Charge Controller is called Maximum Power Point Tracking or MPPT Solar Charge Controller. These MPPT Solar Charge Controllers are basically able to convert excess voltage into amperage. This, resultantly, has advantages in a couple of different areas. Most Solar Power Systems use 12 Volt Batteries, the same found in cars (some use other voltages and the same advantages apply to these systems as well). Solar Panels can deliver far more Voltage than is required to charge the batteries, in essence, converting the excess voltage into amps. The MPPT Solar Charge Controller can be kept at an optimal level while the time required to fully charge the batteries is reduced. This allows the solar power system to operate optimally at all times. Another area that is enhanced by an MPPT Solar Charge Controller is power loss. Lower Voltage in the Wires running from the Solar Panels to the Charge Controller results in higher energy loss in the wires than holding higher voltage. With a PWM Charge Controller used with 12v batteries, the voltage from the solar panel to the Charge Controller typically has to be 18v. Using an MPPT Solar Charge Controller allows higher voltages in the wires from the panels to the solar charge controller. The MPPT Solar Charge Controller converts the excess voltage into additional amps. By Running Higher Voltage in the Wires from the Solar Panels to the Charge Controller, Power Loss in the Wires is reduced significantly. Although. MPPT Charge Controllers are expensive than the traditional PWM Charge Controllers, but their advantages are worth the cost. Advantages : By the way of its design, this device will extract solar energy and tap the same to almost 95-100% level on excellent sunlightbut the normal solar charger controller (zero drop) working on the old concept PWM (pulse width modulation) is not efficient like MPPT.With PWM Charge Controller Place inside Solar Inverter, the Poi For PV Panel is much less and stretched over a long period; for example, If Place A 75w Solar Panel On Sunlight, with MPPT 72 To 74w Solar Power per hour could be tapped, but with zero drop PWM Solar Charge Controller Capable Of Tapping 55w of solar energy per hour; this can be proved by measuring solar current from PV panel using clamp meter and compare with I Max (Current Maximum) from the PV panel manufactures chart, making MPPT is expensive and that is why the price of the same is high when compared to PWM

We offer pwm controllers in india key features :- � affordable � safe, efficient and reliable � easy to install � pwm charging � temperature compensation � dusk to down feature-(optional) � as per mnre specification � micro controller based high efficiency electronics kavita solar offer a wide range of electronic spv charge controllers regulators with standard and custom built versions. The standard model generally conforms to mnre specifications. General specifications and features:- housing material : absms (as per requirement) provisions fuse dc load led indications - battery charging in process - battery charged (charging disconnect) - battery deep discharge (load disconnect) - fuse blown protection options :- - battery reverse polarity - battery deep discharge - battery overcharge - 100% short circuit - surgelightning electrical specification:- for solar charge controller 12v-10a load disconnect battery voltage 11 Ⱡ0.2 volts or as required load reconnect battery voltage 12.5 Ⱡ0.2 volts or as required constant charging voltage 14.5 Ⱡ0.2 volts or as required idle current consumption less than 5ma.

We are offering solar charge controller. Charge controllers come in various types. Solar charge controllers regulate the charge from a solar panel array to a battery bank. Types: pwm: a pwm (pulse width modulated) solar charge controller is the traditional style. They are robust, inexpensive and widely used in solar panel applications. Pwm-shunt: pwm shunt controllers are used less often and mostly in applications where electrical interference is an issue. Mppt: the mppt (maximum power point tracking) solar controller is the shining star of today’s solar systems. These controllers actually detect the optimum operating voltage and amperage of the solar panel array and match that with the battery bank. The result is additional 15-30% more power out of your solar array versus a pwm solar controller. Although the mppt solar charge controller is more expensive than its pwm counterpart, it is generally worth the investment for any solar electric system over 200 watts.

- Two different battery types can be connected - 12 V or 24 V voltage can be combined with main and auxiliary battery - Extremely low own consumption (for example, supported by hibernation mode) - Extensive programming and display options thanks to the remote display Steca PA LCD1 - Intuitive, fully graphical remote LCD The Steca Solarix 2020-x2 is a state-of-the-art dual battery charge controller that is ideal for use in leisure applications. It is equipped with a solar module input suitable for all 72-cell crystalline solar modules in 24 V systems and for all 36-cell solar modules in 12 V systems. Both main battery and starter battery are charged simultaneously and continuously by the solar module. 90 percent of the available power flows into the main battery while 10 percent of the power is retained to keep the auxiliary battery fully-charged. he charge power split can be adapted using the Steca PA LCD1 remote display. The charge controller is equipped with a high-power load output fed by the main battery only. The charge controller has a USB charge socket, which can be used to charge smartphones and tablets. Connection of the Steca PA LCD1 remote display is optional. Product features -Serial topology with MOSFETs -Automatic detection of voltage -Voltage and current regulation -PWM control -Multistage charging technology -Current compensated load disconnection -Automatic load reconnection -Temperature compensation -Positive earthing of one or negative earthing of several terminals possible -Integrated self test -Monthly equalisation charge -USB charge socket for smartphones and tablets

We are a notable Solar Charge Controller Manufacturer, Exporter and Supplier. The Solar Charge Controller is automatic Dusk to Dawn Controller (DTDC). Solar Charge Controller, that we offer, has two step charging algorithm and temperature compensated battery set points. Moreover, the Solar Charge Controller has adequate protection and indications. Availability : 12V/1AMPS-12V/40AMPS

The Solar Charge Controllers, which we supply, are acclaimed for their superior make and quality. We own a substantial storage space that is well-structured and maintained by the professionals. The final packaging and storing of the products is done after complete serialization to avoid last minute hassle. We have a wide supply chain network that enables us to make delivery of consignments within the stipulated time.