Control Relay Dealers

To furnish the diverse requirements of our clients in the best possible manner we are involved in offering an extensive range of Electric Control Relay.

SC3L microminiature electronic time accumulator has built-in lithium battery and small overall dimensions and is used to provide time accumulation in various types of circuits.

In stock and ready for immediate shipment, contactors are suitable for a variety of applications like motor control, heating and ventilating, air conditioning, pumping, lifting equipment, lighting, and process power. This Electrical Control Relay is perfect for rugged industrial applications, T-Line and F-Range electrical contractors meet the requirements of steel mills, cement mills, mines, rock quarries, furnaces, cranes, and hoists. Definite purpose contactors are used in industrial electrical equipment including HVAC, refrigeration, and food processing.

the 6md66 high-voltage bay control unit is the control unit for high voltage bays from the siprotec 4 relay series. Because of its integrated functions, it is an optimum, low-cost solution for high-voltage switch bays. The 6md66 high-voltage bay controller unit also has the same design (look and feel) as the other protection and combined units of the siprotec 4 relay series. Configuration is performed in a standardised way with the easy-to-use digsi 4 configuration tool.for operation, a large graphic display with a keyboard is available. The important operating actions are performed in a simple and intuitive way, e.g. Alarm list display or switch gear control. The operator panel can be mounted separately from the unit, if required. Thus, flexibility with regard to the mounting position of the unit is ensured. Integrated key-operated switches control the switching authority and authorisation for switching without interlocking. High-accuracy measurement ( 0.5 %) for voltage, current and calculated values p and q are another feature of the unit.   application integrated synchro-check for synchronized closing of the circuit-breaker breaker-related protection functions (breaker failure 50bf, auto-reclosure 79) automation can be configured easily by graphic means with cfc flexible, powerful measured-value processing connection for 4 voltage transformers, 3 current transformers, two 20 ma transducers volume of signals for high voltage up to 14 1 ½-pole circuit-breakers can be operated up to 11 2-pole switching devices can be operated up to 65 indication inputs, up to 45 command relays

We offer Relay Control System use full for control labs. In the present unit a simulated second order system is controlled by an electronic relay. Apart from a study of the relay characteristics the experiment introduces the concept of Describing Function. Finally the phase plane method of analysis is covered in detail where the switching trajectories can be displayed on an X-Y oscilloscope. Highlights >>System with electronic relay >>Adjustable hysteresis and dead zone >>Display phase plane diagram on CRO >>Stability study by describing function method Experiments >>Study of the relay characteristics and display of the same on CRO for different values of hysteresis and dead zones. >>Study of the effect of hysteresis on system stability. Graphical analysis to predict sustained oscillations. >>Phase plane analysis of relay control system for various values of Hysteresis and Dead Zones. View the trajectory for different hysteresis and dead zone. Features and Specifications >>Simulated electronic relay using high speed IC's >>Simulated 2nd order linear plant. Facility for displaying x and x. signals >>Dead zone variable from 0-600mV >>Hysteresis variable from 0-500mV >>Built-in signal sources – Sine and Square Amplitude: 0-1V (min.) Variable Frequency: 10, 20, 40, 80, 100, 200, 400, 800 and 1000Hz >>IC regulated internal power supplies >>Literature and patch cords included >>Accessory - a dual beam CRO The experiment is complete in all respect, except a CRO.

Welcome to the RS Components range of Control Relays. If you're looking to monitor temperature, voltage, current or frequency, you'll find the products within Monitoring Relays. For all of your Signal Conditioning and Conversion requirements, visit our Signal Conditioning range.

We are offering panasonic lighting control relays. features: unique and robust design carries the ul electronic ballast rating low power consumption for operation easy onoff status recognition and commissioning for contractors.

Features : Tripping with alarm Completely automatic 4 quadrant regulation Microprocessor based No over compensation during low load Continuous monitoring for defective capacitor stages   Power Factor Control Relay- FRAKO make power factor control relays are micro-processor based & advanced features with harmonic display. This can be interfaced with all types of communication protocols. Fully automatic microprocessor based and simple commissioning. Patented control characteristic - no overcompensation during low load. Measurement and monitoring of harmonics. Over current trip function - protection for capacitors. Four-quadrant regulation. Continuous monitoring for defective capacitor stages through self adjustment of control program. Zero voltage and zero current tripping with alarm signal. Manual / Automatic operation with ability to switch each individual capacitor stage ON or OFF.    

We are offering general control relay. as a trusted general control relay supplier from india, we offer high-end components that are manufactured by experts. Widely demanded by clients all over india, our general control relays are known for their performance along with their long service life. variants emfemi-1pemi-2pemlemrezezigcjgjgsagszgz/gzt key features power consumption is lesserprotected constructionquick terminal availablehigh contact capacityeconomical download the file for moretechanical specifications

We are offering control relays for various electrical applications. We provide these relays to the customers at reasonable prices. The relays are designed as per the international norms. features high switching power small size wide range of application 5 a switching capacity 4 poles configurationac coils 6 to 230 vac dc coils 5 to 110 vdc 1.5 kv dielectric coil to contacts au-clad contact available conform to the ce low voltage directive ul, vde, csa approved standard with led, push with arm and flag application lift-elevators moving stairs textile machines wood working machines plastic molding machines ceramic working machines.

      NHP offers a range of control relays and timers that can be used in conjunction with a conventional automation system to switch higher loads or in stand alone applications where the only basic single function control is required.

Electrical device control ESIM251 allows to expand existing security panels and systems with GSM capabilities. Adds SMS and auto dial alerts a call is dialled and an SMS message is sent to the programed phone numbers. ESIM251 allows prerecord 10 different voice messages up to 15 sec. length each for different user and situation. It is possible to remotely control electric equipment by a call too. Easy configuration ESIM251 supports configuration through USB and SMS. There is an Eldes configuration tool for quick and easy setup. Possibility to add users and change settings later with simple short messages too. Comfortably access event logs through the Internet. Supports non GSM control panels ESIM251 can add GSM and GPRS functionality to almost any security control panel. Expand system’s capabilities with SMS alerts, automatic phone calls and Internet event logs. ESIM251 GSM has 5 inputs and 1 relay output. ESIM252 has 2 outputs. Business flexibility Up to 5 users can use one ESIM251 GSM system. It is possible to prerecord up to 10 auto dial messages. Configure ESIM251 so that different users would get alerts only important to them or about devices they are responsible for. Choose between auto call or SMS, maybe some will prefer to receive both + status alerts about auto reboots and device faults. For example: get informed when food vending machine is full of coins by getting an SMS, this will help to avoid unnecessary checking, or monitor ventilation system in your shopping center with accuracy. The system reports about electronic devices failures too

We offer Relay Control System use full for control labs. In the present unit a simulated second order system is controlled by an electronic relay. Apart from a study of the relay characteristics the experiment introduces the concept of Describing Function. Finally the phase plane method of analysis is covered in detail where the switching trajectories can be displayed on an X-Y oscilloscope. >>Highlights System with electronic relay Adjustable hysteresis and dead zone Display phase plane diagram on CRO Stability study by describing function method >>Experiments Study of the relay characteristics and display of the same on CRO for different values of hysteresis and dead zones. Study of the effect of hysteresis on system stability. Graphical analysis to predict sustained oscillations. Phase plane analysis of relay control system for various values of Hysteresis and Dead Zones. View the trajectory for different hysteresis and dead zone. >>Features and Specifications Simulated electronic relay using high speed IC’s Simulated 2nd order linear plant. Facility for displaying x and x. signals Dead zone variable from 0-600mV Hysteresis variable from 0-500mV Built-in signal sources – Sine and Square Amplitude: 0-1V (min.) Variable Frequency: 10, 20, 40, 80, 100, 200, 400, 800 and 1000Hz IC regulated internal power supplies Literature and patch cords included Accessory - a dual beam CRO The experiment is complete in all respect, except a CRO.

AC & DC Mini contactor ranges from 7 to 16 Ampere For 7-16A - 4 Pole ( 3 + 1 ( NO/ NC) ) AC Coil Ranges for 7-16A Contactor – 24V to 600V(50/60 Hz) DC Coil Ranges- 12V to 250V Silver Alloys contacts for enhanced electrical life Compact in size Panel and Din rail Mounted   7-16A Accessories Aux Contacts – 4 Poles Mechanical Interlock Printed Circuit Board Link Module Wiring Module – 2 variants Surge Suppressor – RC Type, Diode Type, Varistor Type Electronic Timer – 9 Ranges

We are offering control relay. Common options available for all ratings: 6, 9, 12 a control circuits available: ac, dc, low-consumption dc, silent applications: 2.2 kw, 4.5 kw, 5.5 kw in ac3 and ac4 connectors: screw clamp, faston connectors, spring terminals, pins for printed circuit boards

We are offering power factor control relay. Functions: pfr 06pfr 12 is the new range of power factor regulators using on the highest technology and designed for easy and effective regulation. Regulator monitors the power system status and accurately and quickly takes decisions on the connection or disconnection of compensation stages in order to reach the preset target cos phi. Regulator´s microprocessor records system voltage and current consumption of the entire operation via instrument transformer inputs and uses these to calculate the relationship between active power and reactive power in the power system. Regulator calculates the basic harmonic factor of the active and reactive currents using the fft algorithm. Thus precise measurement and control are provided even if the current waveform is distorted by higher harmonic components. Benefits 6 or 12 steps thd measurement alarm output 4 quadrant pfc fcp system (fast computerized program), minimizes the number of onoff operations measuring cos phi, using true rms voltage and current values displays all measurements on one single display connected steps display features designed for easy and intuitive handling by the user parameter setting in run−time totally digital setting and handling technical data supply and measuring voltage: 400 vac (+15−10%), 45−65 hz current measurement circuit: ct, in 5 accuracy of current measurement: 1% accuracy of voltage measurement: 1% accuracy of cos phi measurement: +− 2%, 1 digit display: 1 line x 3 digits x 7 segments + 20 display icons output: relays, max. 250 v, 4 a, ac1 protection degree: ip 55, category iii dimensions: 144 x 144 x 62 mm