Network Gateways Dealers

Xtend Fixed Cellular Terminal (FCT) is a telecommunication equipment that can be used to connect a Telephone or EPABX to the GSMCDMA Mobile Network. Xtend FCT provides instant phone connections similar to landlines; even in remote areas, construction sites, project offices, offshore oilrigs, and ferries. They can also be used to provide emergency backup phone lines when conventional phones fail during road repairs, floods, etc. Xtend FCT is a boon to call centres and other organisations with a large number of outgoing calls. Organisations with one or more branches can benefit from the facility of making interoffice calls and calls to field staff using Xtend FCT.

GSM FCT for Mobile SIM (All 4G SIM Supportex except RELIANCE JIO) i.e. VOLTE not supported. Converts your mobile number to wireline phone Allows you to connect telephone handset or can connect to EPABX Compatible with All Korecall phone recorders   GSM FCT (Fixed Cellular Terminal) is a compact fixed cellular terminal used to make and receive calls over GSM network while retaining the existing infrastructure. GSM FCT eliminates interconnection charges and provides substantial cost savings by turning all calls into mobile-to-mobile calls. It easily integrates with any PBX or telephone via GSM network. GSM FCT is ideal for small offices, remote project sites and retail shops for cost-effective and reliable communication.   Features:   Make and receive mobile calls from conventional analog phones Quad-band GSM and Tri-Band network operation Caller ID presentation on analog extension Due to intense competition in the mobile network market, mobile providers offer lower tariff rates compared to landlines for Subscriber Trunk Dialling (STD), International Subscriber Dialling (ISD) and Closed User Group (CUG). By enabling you to connect to your mobile phone provider via the office EPABX, GSM FCT extends these schemes for use by the entire organisation.

Arctic Modbus Gateway effectively integrates serial Modbus devices to IP based management systems via Ethernet, GPRS and EDGE. This is achieved by protocol conversion from Modbus serial protocols to Modbus TCP protocol and vice versa. Combining this to many other Modbus specific features Arctic Modbus Gateway is powerful and flexible building block for industrial Modbus communication, Also mobile operator independent systems (when GPRSEDGE is used) can be built with Viola M2M Gateway which provides virtual static IP addresses and VPN connections for Arctic devices.

Fixed Cellular Terminal (FCT) is telecommunication equipment that can be used to,Smooth texture,Fax Transmission (PC Fax),Less maintenance,Quality approved.

 GW1102-2D(RS-232) is an industrial Ethernet Modbus gateway that converts between Modbus TCP and Modbus RTU/ASCII protocols. It provides 2 port RS-232 serial (RJ45) and 1 port 10/100M Ethernet.Modbus TCP, Modbus RTU and Modbus ASCII protocol are integrated in the products, users can easily realize the seamless integration of Modbus Ethernet devices and Modbus serial devices and even multi master and slave hybrid networks. At the same time, the user can be set up by Web or Telnet. The simple design can not only realize the fast application, but also guarantee the application of the entire real industrial environment.The products using EMC protection design, can work in rugged environment.     Features 1.Support Modbus TCP, Modbus RTU, Modbus ASCII, IP, ARP, DHCP and DNS protocol2.Support 1 port 10/100M Ethernet3.Support 2 Port RS-2324.Support WEB and Telnet configuration5.Convert between Modbus TCP and Modbus RTU/ASCII6.Support RTU Slave, RTU Master, ASCII Slave, ASCII Master four operating modes7.Support ID mapping function, to achieve the management of the host ID8.300bps~115200bps baud rate and nonblocking communication9.Support IP address and MAC address filtering function10.Slave mode support 16 TCP master connections11.Master mode support 32 slave TCP connection requests12.Support Response Timeout and Interval Timeout setting13.Support cross-gateway and cross-router communication14.IP30 protection grade, metal shell, wall mounted installation15.No fan, low consumption design16.Working temperature: -40~75℃     Ethernet portStandard: 10Base-T, 100Base-TXProtocol: Support Modbus TCP, Modbus RTU, Modbus ASCII, IP, APR, ICMP, DNS and DHCPSignal: Rx+, Rx-, Tx+, Tx-Speed: 10/100MbpsWorking: Full-duplex and half duplexTransfer distance: 100mConnector: RJ45Serial portSerial port number: 2 ports RS-232RS-232 signal: TXD,RXD,RTS,CTS,GNDParity bit: None, Even, Odd, Space, MarkData bit; 7bit, 8bitStop bit: 1bit, 2bitBaud rate: 300bps~115200bpsRS-232 transfer distance: no more than 15mRS-232 connector: RJ45Master mode: 32 TCP slaves Slave mode: 16 TCP mastersWork mode: RTU Slave, RTU Master, ASCII Slave, and ASCII MasterLED IndicatorPower (PWR)Ethernet port connect status (Link)Serial port data indicator: TX1~TX2, RX1~RX2;Power requirementsInput voltage: 9~48VDCNo-load consumption: 0.79W@9VDCFull-load consumption: 0.86W@9VDCEnvironment limitsWorking temperature: -40~75℃Storage temperature: -40~85℃Relative humidity: 5%~95%(non-condensing)MechanicalShell: IP30 protection, metal shellInstallation: Wall mountingWeight: 230gSize (L×W×H): 100mm×69mm×22mmStandardEMI: EN 55022 Class A, FCC Part 15 Subpart B Class AEMS: EN 61000-4-2 (ESD), Level 3Shock: IEC 60068-2-27Free fall: IEC 60068-2-32Vibration: IEC 60068-2-6 WarrantyWarranty time: 3 yearsCertificatesCE, FCC, RoHS, UL508 (pending)Packing List1. GW1102-2D(RS-232)-P(9~48VDC) ×12. User manual ×13. Straight network cable ×14. Power adapter ×15. CD ×1 6. Warranty card ×17. Certificate of quality×1Optional accessories:  DIN-Rail Mounting Kit (35mm) ×1