Coolant Chiller Dealers in Zirakpur (1 products available)

Are You Throwing Away The Expensive Metal Working Coolants.? Coolants are a major expense, for any metal working industry like yours. Coolants are becoming expensive by the day. Replacing them is a messy and time-consuming job. Disposing them is an equally expensive affair in the face of today’s tough environmental regulations. Dirty Coolants with tramp oil and solid particles contribute to increased tool wear, poor surface finish and not-so-clean components. Also dirty coolant encourages bacterial growth giving rise to foul smell and skin irritation. It is prudent, therefore to take steps to maintain your coolant clean and with KleenCOOL Recycling Systems it is an easy task. We are a reliable KleenCOOL Emulsion Coolant Recovery System Supplier based in Punjab, India. What’s more, you can recycle your coolant 2 to 3 times before disposing and recover as much as 80% every time you recycle. That’s a huge saving on your coolant oil budget! The Types of Contaminants : Tramp oil - formed by hydraulic and lube oil mixing with coolant. Solid particles – burrs, chips and rust particles. Bacteria, bad odour and skin irritation due to bacteria.. How Does KleenCOOL Purify? You can recycle and reuse the contaminated coolant 2 -3 times and recover 80% of it per recycle by removing tramp oil, solid particles, smell and bacteria. Technology: Powerful vacuum pump pulls out chips/sludge and floating oil along with coolant from all corners of machine sump in no time. A large strainer in vacuum tank holds the chips. You can take out the chips from the side discharge door quickly. From the vacuum tank a centrifugal pump sends the coolant to the Tramp oil separator where all the free tramp oil is removed. The coolant is pumped through 80 and 20 micron reusable filters for fine filtration. An Ozone generator diffuses ozone in the coolant for complete bacterial disinfection. Clean coolant is returned to the sump. All these are done without stopping your machine! Benefits : Contaminated waste coolant is made usable again and again.Approx.80% of coolant recoverable. Improved surface finish on componentsIncreased tool life Better operator health Cleaner machines and shop environment..