Knife Edge Gate Valve Dealers in Ahmedabad (60 products available)

Certification : MS-SP-81

Type : BI - DIRECTIONAL I UNI - DIRECTIONAL

Material of Construction : CI I WCB I SS I WC6 I WC9

End Connections : Wafer Type I Wafer Lugged I Semi Lugged

Pressure Rating : PN 10 I PN 6 I ASA 150#

Size Range : 50mm to 600mm

API 600 : API 598

Gate valves (also known as knife valves or slide valves) are linear motion valves in which a flat closure element slides into the flow stream to provide shut-off. Gate valves and knife valves are designed to minimize pressure drop across the valve in the fully opened position and stop the flow of fluid completely. Gate valves and knife valves are advantageous in applications involving slurries, as their “gates” can cut right through the slurry.

Size : 50 mm to 300 mm

Material : Stainless Steel

Pressure : Medium

Feature : Casting Approved, Durable, Good Quality

Valve Size : 4",6",8"10",12"14",16",20"

Power : Hydraullic

VQ Knife Edge Gate Valve is an Uni-directional/Bi-directional lug type valve designed according to MSS-SP-81 for industrial service application. That is Supplier & Manufacturer of Knife Edge Gate Valve. The Design of the body & seat assures non-clogging shut off on suspended solids.

Type : Uni-directional / Bi-directional Knife Edge Gate Valve

Size : 50mm T0 800mm (higher size on application)

Port : Round Port, “V” Notch, Square Port.

MOC : Cast Iron / Cast Steel / SS 304 / 316 / 304L / 316L.

Gland Packing : Multi layer gland packing in a variety of materials to suit condition provides total sealing.

Knife Edge Gate Valve is the specific design. This design ensures minimum contact between the parts of the Valve, Reduces the Wear & Tear. The high-performance Knife Gate Valves feature. Non-Sliding Motion, Avoid Sliding Contact between Body & Gate allow flushing of media form the Valve interior. A wide variety of hardened trim options are available on Gate, Seat and Wear Ring. Batten edge of the Gate (Knife-Edge) allows the tight shut off even when solid particles settles at the bottom of the Body. The valves are regularly used for applications to handle, pulp in pulp mill, slurries, powder such as coal, ash, dry and wet powder in power houses, pneumatic conveying systems, dust collecting systems and material handling equipment’s. For liquid slurries and fiber applications with low-allowable leakage the valves are most commonly used. Pneumatic, Manual, Gear and Hydraulic equipment devices are provided for operation of the Valves. For elevated mounting, chain driven Valves are also provided. Our product range covers valves of sizes up to 36” [900mm] and ASME classes up to 150, PN 10 and PN 16. Based on customer requirements, valves in different pressure classes, larger sizes and other materials are also offered. We manufacture this Valve according to MSS SP – 81 designing and manufacturing standards. Uni-directional Type Knife Gate Valve Bi-Directional Type Knife Gate Valve Square & Rectangle Type Knife Gate Valve Fabricated Type Knife Gate Valve

Brand Name : K.I

Material : C.I, SS, brass

Place of Origin : India

Pressure : 2 to 10 bar

Application:- Pulp & Paper For half a century, �K.I� Engineered Valves has been a proven supplier of quality valve products designed specifically for the pulp and paper industry. Year after year, we�ve designed and engineered products and features uniquely adapted to pulp and paper processing. These valves substantially reduce downtime and maintenance costs and consistently outlive their payback period. Through testing and application, we continue to solve countless problems associated with pulping, bleaching, dewatering, recovery, papermaking, and recycling. Our valves are designed to provide long life in an industry where life expectancy of equipment is exceedingly low. Mining "K.I� is leader in fluid handling with 50 years of design, manufacture and fabrication of engineered valves with specific expertise in slurry applications. Mining customers depend on KIRIT IIEngineered Valves for consistent reliable delivery, cost effective solutions, and after sale support. We approach each customer�s requirements with the certainty that we have the right product to fit their most challenging valve application. Better valve performance in mining and processing of metals and minerals Less unscheduled maintenance downtime Improved plant performance and pipeline reliability Safety for operators General Industry �K.I� Engineered Valves provides valve solutions for a wide range of general industry applications. Industrial Gate valves have been used to solve problems associated with corrosive, erosive and abrasive media in such industries as steel production, pickling, and plating. Gate valves can be found in many applications in water and wastewater treatment, including chemical treatment, filtration, and sludge handling. The industrial Gate valve has been the valve of choice for demineralized water systems for the past 40 years. Oil and Sand

Material : Carbon Steel / Stainless Steel / Other

Type : Uni - Directional / Bi - Directional

End Connection : Flanged End / Wafer Type / Lug Type

Feature : Long Life Span

Operation : Hand Wheel / Pneumatic Actuator / Cylinder / Electric Actuator

Size Range : 50mm to 1200mm

Backed by a hardworking team, we are capable of offering the Knife Edge Gate Valves as per the exact requirements of the buyers. Our effective and excellent quality analysis helps us in delivering the best in class range of products.

Brand Name : Shaan

Material : Steel

Application : Pipe Line, Valve, Industry, Machinery

Size : 50 mm to 300 mm

Weight : 14000 Grams (g)

Surface Treatment : Casting

Sample Policy : Sample costs shipping and taxes has to be paid by the buyer

Main Domestic Market : All India

Sample Available : Yes

Size : 100-150mm, 150-200mm

Type : Knife Edge Gate Valve

Material : Alloy Steel, Carbon Steel

Certification : ISI Certified

Application : Gas Fitting

Weight : 10-15kg, 15-20kg

Color : White

Pressure : High

Feature : Blow-Out-Proof, Casting Approved

End Connection : Butt Weld

Size : 50 MM TO 800 MM

Media : Water

Country of Origin : Made in India

Material : CAST STEEL

I Deal In : New Only

Automation Grade : Manual

End Connection Type : Flanged

Size : 100-150mm, 150-200mm

Material : Carbon Steel, Forged Steel

Application : Water Fitting

Pressure : High, Low, Medium

Feature : Good Quality

End Connection : Socket Weld Ends

Country of Origin : Made in India

Brand Name : Ceson

Size : 2 Feet

Finishing Type : Color Coated

Body Material : SS

End Connection Type : Flanged

Model Number/Name : KGV

Usage/Application : Chemical & paper industries

We are offering knife edge gate valve. knife gate valve available in ss/cs/ci construction

Cast corrosion resistant steels or cast Iron body to provide resistivity against corrosion foe all wetted parts, Full round port design allows high flow capacity and minimum pressure drop, Wafer-Design - Flangeless, Full Lug or Two Lug Design of sleek construction fo low headroom mountings, Options include ANSI, DIN and BS Standards, Stainless Steel and Special alloys. The gate is ground and buffed on both sides, to enhance packing life and ensure positive shut off, due to bevelled edge to cut through solid particles settled at the bottom.

Knife edge gate valve are regularly used for applications to handle, pulp in pulp mill, slurries, powder such as coal, ash, dry and wet powder in power houses, pneumatic conveying systems, dust collecting systems and material handling equipments.

AMTECH makes high performance Knife Edge Gate Valves features with design suitable for specific media.We have unidirectional knife edge gate valves. The gate of knife edge gate valve is made from SS 304, SS 316,SS 410 and we can do the special treatment for lincrease the life span. A wide variety of hardened trim options are also available for the Gate, Seat and Wear Rings. Knife-Edge Gate Valves withstand high temperature & abrasive slurries in Mining, Steel, Power, Chemical, and Paper Industries Ideal for high-density Slurry Lines.We mfg special valves for the Power plants with quick opening design.We have soft seated valves with Teflon ,Nitrile,EPDM,Viton,Silicon etc. Please click on the links below, to know more about each of the knife gate valves.   Specification  

These valves have discs in the shape of knife and are particularly applied to regulate the flow of dense viscid fluids and semisolids in the industries. This type of special knife design enables it cut through the fluids and semisolid material flowing. We are the leading Knife Edge Gate Valves Manufacturer of India. The special design of our valves made by our expert professionals make them highly preferred for regulating very abrasive & viscous fluids in the chemicals industries, the paper and pulp industries, sewage treatment plants, Textile as well as cement industries across the world.   These are preferred because of their perfectly smooth closure &tight shutoff functionality. We manufacture them making use of high grade basic materials as well as components sourced from the most reliable vendor of the market. These are made as per the latest technology at our state-of-the-art manufacturing unit. These are made in strict adherence to the industrial standards. These are made in standards as well as customized specifications as required by our clients. Our products are guaranteed for their flawlessness because these are quality tested and verified absolutely by our experts. We are also the leading Knife Gate Valve Exporter of India.

Knife Gate Valve mostly uses to handle powder; high viscous or slurry type thick media service to cut throughout and close the valve. Nivz Valves & Automation is Knife Gate Valve manufacturers and exporters in Unidirectional and Bi-Directional type, Rising Stem and Non-Rising Stem with Metal to Metal Seat & Soft Seat which mostly use in service of Isolation and On-Off service. The valve sliding plate (gate) has knife edge, so it is called Knife Gate Valve or Knife Edge Gate Valve which both are same. Previously it was mostly use in service of Powder, Slurry, Pulp and Paper Mill now it use in many more industrial applications. Some user also asks for Slide Gate Valve in place of Knife Edge Gate Valve. Nivz Valves & Automation and leading manufacturer and exporter of valves to Dubai, Kuwait, Kingdom of Saudi Arabia, Jeddah, Jubail, Malaysia, Thailand, Singapore, Australia, Brazil, Italy, Romania, Azerbaijan, Sharjaha, Abu Dhabi, United Arab Emirates, Egypt, Turkey, Sri Lanka, Yemen, Pakistan, Bahrain, Indonesia, Zambia, Uganda, Netherlands, Philippines, Vietnam, Dominican Republic, Oman, West Africa, Finland and Jordan. Knife Edge Gate Valve has very simple construction and assembly is with very few parts like Body, Knife Gate, Seat, Gland Flange, Gland Packing and Yoke - Bonnet Assembly. Each knife gate valve body design is single piece casted heavy duty construction, slide gate plate grinded with lapped and seat integral with body or renewable type as customer request.   Knife Gate Valve use of application in Corrosive Service, Pulp - Paper Mill, Abrasive Slurry, Power Plant, Steel Plant, Mining & Mineral Plant, Dry Material Handling, Sugar Mill, Cement Industries, Waste Water Treatment Plant, Process Chemical Plant and others. For more detail specification data sheet, technical data sheet, cross section drawing, product catalogue, operation and maintenance manual of Knife Edge Gate Valve contact us. Nivz manufacture knife gate valve with Manual Hand Wheel Operated, Pneumatic Cylinder Operated, Motorized Actuator Operated, Electrical Actuator Operated, Hydraulic Cylinder Operated, Worm Gear Operated and Chain Wheel Type Gear Operated. Knife Edge Gate Valve Material of Construction Body Design – Unidirectional and Bi-Directional (flow can be from either or side) Body Construction – Single Piece Casted, Rugged, Heavy Duty  Knife Gate – Knife Gate Plate supply in Stainless Steel (S.S.) 304/316/304L/316L, other special grade on request. Knife Gate both side fully machined, grinded, buffed and lapped at seat contact side with beveled edges to extend life of Gland and Seat. Stem – Single Piece from heavy duty round bar with quality square thread and brass or gun metal stem nut to extend life of stem. Seat –   Integral Metal to Metal seat as per MSS SP-81 Standard Renewable Type Seat: Elastomer, Rubber Seat (NBR, EPDM, Nitrile, Neoprene, Viton, Silicon Rubber O-Ring) Renewable Type Seat: PTFE (Teflon) Soft Seat Deflection cone with Stellite Hard Face – F6  Port Opening – Full Round Port / V – Notch Type

Especially designed Electro Pneumatically Operated Knife Edge Gate Valve has great performance for extremely thick fluids. Operation of the valve receives no obstruction in the flow path and function with very low friction loss. Standard designs valves are available with numerous specifications. At Process Equipment Corporation, specific configurations are served within stipulated time period. We make available the original qualitative Electro Pneumatically Operated Knife Edge Gate Valves at affordable prices. Material of construction are define as the cast iron, cast steel, stainless steel – S.S. 304, 316, 304 L and 316 L. We make available our Electro Pneumatically Operated Knife Edge Gate Valves with end connection of flanged end or screwed end. These quick open valves are two and three way valves and controlled electro pneumatically. Time tested valves provide tight shut-off. These valves find their special usages in the corrosion resistant applications. Sturdy construction of the gate plate ensures tight shut-off even for the thick or high viscous liquid.   Our gate valves are available with replaceable soft seat with varied option of stainless steel seat rings, rubber ring, and PTFE ring. It is effectively perform for the slurries, pulps and dry solids.     CUSTOM DESIGN INQUIRY :- metal or resilient seat reasonable range highly durable replaceable wear seats easy to maintain effective for abrasive slurries replaceable elastomer cartridge seats for sealing wetted parts are of solid stainless steel APPLICATIONS :- Chemical industry Petro chemical industry Refineries Sugar mills Process industries Pneumatic conveying systems Dust collecting systems Material handling equipments

SIZE RANGE : 50MM TO 600 MM

MOC / BODY : C.I. / D.I. / WCB./ CF8/CF8M & ALLOY STEEL

Knife edge gate valve, Knife edge Gate Valve features a single piece cast stainless steel fully lugged body, which is very robust in construction to cater to the extreme demanding application. The gates made of stainless steel and other superior alloys are ground with super surface finish on both sides to assure positive shutoff. The machine and highly finished gland pockets ensure a leak proof gland packing and perfect steam steel.