Proving Rings Dealers in Delhi (22 products available)

Material : Metal

Capacity : 100-1000nm

Application : Industrial

Surface Finshing : Polished

Resistivity : Rust Resistant

Color : black

The company has made its mark as a Manufacturer and Supplier of Proving Rings. The Proving Rings are used for load measurements as well as in outfits of varied soil, cement, & bitumen testing equipment. Made using forged steel for maximum strength, sensitivity, and stability, the Proving Rings have a long life and amazing accuracy levels. The Proving Rings can be availed in different capacities arranging from 50-200000 KGF. The Proving Rings consist of dial gauge, plunger anvil, loading bosses, loading ball nipple and steel ball.Working : Compressive or tensile load is applied within the elastic range temporarily deforming the rings Measurement of deformation by sensitive dial gauge fixed co-axially at the center of proving ring Readings of dial gauge readings versus load applied enable operator to find out unknown load by noting dial gauge reading for unknown load High elasticity ensures retention of shape on removing load if loaded in elastic limits

The proving rings are made of special steel, carefully forged to give maximum strength and machined to give high sensitivity commensurate with stability, ensuring long life and accuracy. Loading pads have female threading 12" BSF (16 tpi)..

Type : Proving Rings

Material : Metal

Certification : ISI Certified

Application : Load Meassurements

Capacity : 100-1000nm

Packaging Type : Protective Wooden Case

Automation Grade : Automatic

Automation Grade : Semi-Automatic

Brand Name : Steco

Packaging Type : Box

Usage : Asphalt Mixture Stability Tester

Display Type : Analog

Tension Compression Proving Rings are having standard 1/2" (BSF Threads) and for measuring tension , 2 nos. Tension rods having male threads at both ends are supplied. For measuring loads in compression these tension rods are removed and the ring can be used in usual way. Works calibration charts for tension and compression are supplied with each ring . Supplied complete with tension rods in a carrying case. Note : We can also supply the following Proving Rings. 1. Tension cum compression proving ring upto 10,000kg capacity. 2. Double proving rings.

Capacity : 25kgf to 100kgf (1KN), 200kgf (2KN), 250kgf (2.5KN), 1000kgf (10KN), 2000kgf (20KN) etc.

The Proving Rings are made of special steel, carefully forged to provide high and stable accuracy, dependability and repeatability. The dial gauge and anvil are mounted on U-brackets clamped to the ring body by set screws. The indicator has a sensitivity of 0.002mm div and the deflection is directly proportional to the applied load. The rings are supplied complete with dial gauge and Works Calibration Chart, individually packed in polished wooden boxes. NPL (India) NCCBM Calibration Certificates can also be arranged for any proving ring at an additional cost. Separate Pair of Loading Pads are provided to suit each proving ring.

Automation Grade : Manual

Brand Name : Barkat Hitech Engineering

Material : Tank Plate

Country of Origin : Made in India

Usage/Application : Tension Compression Proving Ring

Finishing : Crome

Proving rings are used for load measurements and are used in outfits of a number of Soil / Cement & Bitumen Testing Equipments like Direct Share Test Apparatus, Triaxil Share Test Apparatus, CBR Test, Unicontained Test, Marshall Test etc. They are made out of special steel carefully forged to give maximum strength and machined to give highest sensitivity combined with stability to ensure long life and accuracy. When Compressive or tensile load is applied within the elastic range, the proving rings get temporarily deformed. This deformation is measured by a sensitive dial gauge fixed co-axially at the center of proving ring. The dial gauge readings thus obtained versus load applied enable the operator to find out unknown load, just by noting the dial gauge reading for unknown load. The proving rings have high elasticity and on removing load they regain their original shape provided they are loaded in their elastic limits.A Dial gauge and plunger anvil are mounted on brackets clamped to the ring body. The dial gauge is held perfectly rigid without the remote chance of shifting due to inadvertent shocks or pressures exerted on it. The dial gauge plunger rests on an adjustable anvil. Proving Rings , from 50 kg to 1,00,000kg capacity provided with 1/2 inch B.S.F female threads. Loading bosses and a loading ball nipple and steel ball are supplied with each rings. Rings of capacity over 25000kg (or 25 Tonnes) are not thus threaded. Each ring is individually calibrated and supplied with works calibration chart and a carrying case.

The company is a recognized Manufacturer, Exporter and Supplier of high quality Proving Rings across many parts of the world. Our Proving Ring is available in Compression & Tension Variants. Our Proving Ring is highly efficient, durable and corrosion resistant. Besides, we offer the best deal to avail our Proving Ring. Tension Proving Rings Capacity- 2.5 kN, 250 kgfCapacity- 5.0 kN, 500 kgfCapacity- 10.0 kN, 1,000 kgfCapacity- 20.0 kN, 2,000 kgfCapacity- 50.0 kN, 5,000 kgfCapacity- 100.0 kN, 10,000 kgf

All proving rings are integral type viz. the loading (outside) bosses are forged integral with the ring body. This ensures that there is no possibility of abutment shift and consequent loss of accuracy in reading that always exists with bolted abutments.

Country of Origin : Made in India

Material : Alloy Steel

Automation Grade : Manual

Pressure : 1-50Kn

Frequency : 50 Hz or 60 Hz

condition : NEW

Shape : Round

The Proving Rings are made up of special steel, carefully forged to give maximum strength and machined to give high sensitivity commensurate with stability, ensuring long life and accuracy. All proving rings are integral type viz. the loading (outside) bosses are forged integral with the ring body. This ensures that there is no possibility of abutment shift and consequent loss of accuracy in reading that always exists with bolted abutments. Repeatability in these Proving Rings is as stipulated in IS:4169.The rings are supplied complete with dial gauge and Works Calibration Chart, individually packed in polished wooden boxes. National Physical Laboratory (NPL), (India) National Council for Cement & Building Material (NCCBM )Calibration can also be arranged for any proving ring at an additional cost. Proving rings to meet special requirements are also available on request.Separate polished and ground pair of Loading Pads for Compression Proving Rings and pair of Shackles for Tension Proving Rings are provided to suit each proving ring.

Capacity : 500KN capacity

Material : mild steel

Brand Name : SISCO INDIA

Callibration : Each ring are individually calibrated and supplied with works calibration chart and a carrying case

Dial gauge : The dial gauge plunger rests on an adjustable anvil.

Shape : Circular

Color : variable

Usage/Application : Soil/Cement & Bitumen Testing

Proving rings are used for load measurements and are used in outfits of a number of Soil / Cement & Bitumen Testing Equipments like Direct Share Test Apparatus, Triaxil Share Test Apparatus, CBR Test, Unicontained Test, Marshall Test etc. They are made out of special steel carefully forged to give maximum strength and machined to give highest sensitivity combined with stability to ensure long life and accuracy. When Compressive or tensile load is applied within the elastic range, the proving rings get temporarily deformed. This deformation is measured by a sensitive dial gauge fixed co-axially at the center of proving ring. The dial gauge readings thus obtained versus load applied enable the operator to find out unknown load, just by noting the dial gauge reading for unknown load. The proving rings have high elasticity and on removing load they regain their original shape provided they are loaded in their elastic limits.A Dial gauge and plunger anvil are mounted on brackets clamped to the ring body. The dial gauge is held perfectly rigid without the remote chance of shifting due to inadvertent shocks or pressures exerted on it. The dial gauge plunger rests on an adjustable anvil. Proving Rings , from 50 kg to 1,00,000kg capacity provided with 1/2 inch B.S.F female threads. Loading bosses and a loading ball nipple and steel ball are supplied with each rings. Rings of capacity over 25000kg (or 25 Tonnes) are not thus threaded. Each ring is individually calibrated and supplied with works calibration chart and a carrying case.Calibration charts from Standard Laboratories for the Proving Rings ordered are also available at extra cost.All Proving Rings are Integral Type.Integral type Compressive Proving Rings of different capacities from 50kgf to 200000kgf are available.(a) Above cap. 50 to 500kg.(b) Above cap. 500 to 3000kg.(c) Above cap. 3000 to 5000kg.(d) Above cap. 5000 to 10000 kg.(e) Above cap. 10000 to 20000 kg.(f) Above cap. 20000 to 30000kg.(g) Above cap. 30000 to 50000 kg.(h) Above cap. 50000 to 100000 kg.(i) Above cap. 100000 to 200000 kg.(j) Above cap. 200000 to 300000 kg.

IZOD IMPACT TESTING MACHINE, TENSILE BRIQUETTE TESTING MACHINE

Laboratory Proving Rings, Laboratory Shrinkage Bar Mould, Proctor Mould

subsonic wind tunnel, Colour Matching Cabinet, toxicity test apparatus

Tension And Compression Type Proving Ring, Metacentric Height Apparatus